Hampshire · England
Wittensford Regrouting
We cover Wittensford for raking out old, cracked or stained grout and regrouting tiled walls and floors. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Good tiles let down by tired grout
- A grout colour that no longer suits the room
- Gaps where the shower grout has gone
DIY sealant or a professional job?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
About our regrouting in Wittensford
When grout stays dark however much you clean it, the discolouration has usually soaked into the grout. Replacing it is the lasting answer and you can pick a different colour while you are at it. We work on shower walls, bathroom floors and kitchen splashbacks, and the jobs we see most are good tiles let down by tired grout and grout in corners that has cracked.
Being in a small place like Wittensford makes no difference to the job itself: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
There’s a 12-month guarantee on every job, whatever its size.
- Location
- Wittensford (SO43)
- Region
- Hampshire
- Cover
- A year, on every job
- Quotes
- A clear price before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
What regrouting looks like in Wittensford
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Ashurst New Forest station change hands often, and clean grout and fresh sealant between tenancies make a bathroom look cared for again. In and around Wittensford, as anywhere, good regrouting starts with a clean, dry, properly prepared joint.
Wittensford is about 4 miles west of Totton, in Hampshire. For regrouting in and around Wittensford, it’s easy to get a quote: please call 0345 464 0079 or send us an email. We’re based in Crawley and cover Hampshire, Wittensford included. Wittensford is one of 683 towns and villages in Hampshire where we work for regrouting. Our Southampton page covers work nearby, about 9 miles away.
Here we cover the SO43 postcode area for regrouting. Nearby, we also carry out regrouting in Cadnam (1 mile east), Newbridge (1 mile north-east), Minstead (2 miles south), Bartley (2 miles east) and Copythorne (2 miles east). Further out, we also cover Winchester (15 miles north-east), Eastleigh (11 miles east), Totton (4 miles east), Chandler's Ford (10 miles north-east), Hedge End (13 miles east) and Lymington (12 miles south).
Landmarks near Wittensford
We work in homes and buildings around Sir John Barleycorn Inn, among other places. The closest station to Wittensford is Ashurst New Forest station, about 3.8 miles south-east. Nearby you’ll also find Tatchbury Mount Hospital (3 miles east). The countryside around Wittensford includes Copythorne Common.
How the job changes by surface
Corners and edges
Corners flex as the building moves, so we seal them rather than grout them.
Bathroom floors
Regrouting a floor brightens the whole room. The edges where floor meets wall or bath get silicone.
How to look after the new joints
Aftercare is simple:
- Keep the fan on after showering
- Look at the sealant in the corners now and then
- Don’t ignore a tile that feels loose
- Use a soft brush rather than a wire one
Give the new grout the time we tell you before using the shower, so it can harden properly. After that, rinse the tiles after showering and let the room air.
Stains that will not clean are a sign the grout is breaking down. Regrouting at this stage is straightforward, before the joints open up.
Landlords, agents and businesses in Wittensford
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.
The process
We work through the job in order: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours for a shower enclosure, longer for a whole room, and the area is left clean. Somewhere as small as Wittensford, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We agree the area to be regrouted and point out any loose tiles.
- Grout is raked out without chipping the tiles.
- Dust is cleared from every joint.
- We grout the joints and wipe the tiles clean.
- Internal corners and edges are resealed.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us about any previous sealing or DIY attempts
Get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Read more
Why deal with it now?
It’s tempting to fill a few cracks yourself, but patched grout rarely matches the rest and the old grout carries on failing. Regrouting the whole area gives an even, lasting finish. Around Wittensford, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please phone 0345 464 0079 or drop us an email and we’ll talk you through it.
Why Wittensford clients choose us
- Anti-fungal silicone where joints get wet
- Experience in homes, commercial sites and hotels
- Over 20 years’ experience
- Rated 4.9 stars on Google
Read our cost guide or what customers say.
What affects the cost of regrouting
There’s no set price list. The quote depends on:
- The type of sealant required
- The old material and how stubborn it is
- Mould in or behind the old joints
- Whether the work is at height
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we will explain the quote if you ask.
Helping us quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- The rough size of the job
- The problem you’ve noticed
- Where the job is, and your postcode
- Photos by email, if that’s easy
Every job is quoted individually. Just phone 0345 464 0079 or send us an email with the details and send pictures if you have them.
More services for Wittensford
Common questions in Wittensford
Is Wittensford in your area for regrouting?
Yes. We work across London and the South East, and Wittensford is part of that. Just ring 0345 464 0079 or drop us an email with a few details of the job.
Can you help a landlord with a rental near Ashurst New Forest station?
Yes, we work for landlords and agents. You can call 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before we start.
How long will you be here?
Most jobs take anything from a few hours to a full day, depending on the area, including preparation and clearing up. Your quote will say how long we expect yours to take.
Are you ARBOMaster approved?
Yes. Mr Mastic is an ARBOMaster approved applicator.
What sealant do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We’ll tell you what we’re using and why.
Is it OK to seal over old sealant?
No. The old sealant always comes out first.
How long should I wait before showering?
Before we leave, we will tell you how long to wait. The grout and sealant both need to cure before the shower is used.
What guarantee comes with the work?
Our one-year guarantee covers every job.