Kent · England
Regrouting in Ware, Kent
Our applicators work in Ware on raking out old, cracked or stained grout and regrouting tiled walls and floors. Old material cut out, joints cleaned and sealed neatly.
- Floor grout that will not come clean
- Grout washed out of a shower
- Good tiles let down by tired grout
Regrouting in Ware, done properly
Changing the grout colour is a simple way to update tiles. You might go from white to grey or back again. Just mention the colour you’d like when you ring 0345 464 0079 or drop us an email. We work on tiled floors, bathroom wall tiles and bathroom floors, and people most often call us about cracked or crumbling grout lines and floor grout that won’t come clean.
Homes around Ware are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we’ll put it right.
- Where
- Ware (CT3)
- Wider area
- Kent
- Cover
- One year on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
What we do, step by step
Before we leave, we go over the finished joints with you and tell you how long to leave it. The visit itself normally takes a few hours, or longer for a fully tiled room, depending on the size of the job. Somewhere as small as Ware, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We check the tiles are sound and flag any that are loose or hollow.
- Old grout is raked out to a consistent depth without chipping the tiles.
- We vacuum the joints and clean out the dust.
- Fresh grout goes into the joints and the tile faces are wiped clean.
- The corners and edges get new silicone, because grout there would crack.
Getting ready for the visit
- Move anything stored near the joints
- Let us know about parking restrictions
- Mention any sign-in or site rules at work premises
Get a quote
Asking for a quote is easy: let us know what needs doing and where, and roughly how big it is. Photos by email help us understand the job.
Read more
Towns and villages near Ware
More services for Ware
Keeping the joints in good condition
Once the sealant has cured, a few habits help it last:
- Don’t ignore a tile that feels loose
- Use a soft brush rather than a wire one
- Rinse soap off the tiles after each shower
- Check the corner silicone every few months
Use a gentle cleaner on the grout with a soft brush. Avoid neat bleach and strong acid descalers because they wear grout away.
Leaving failed grout can mean tiles come loose. Once that happens, regrouting won’t fix it so early action pays.
Work for landlords, hotels and businesses
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
What regrouting looks like in Ware
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
If you let a flat or house near Minster station, clean grout and fresh sealant between tenancies make a bathroom look cared for again.
Ware is about 6 miles south-west of St Lawrence, in Kent. From the centre of Ware to the outskirts, regrouting is available for homes and businesses alike, from flats and houses to offices and hotels. Our Kent coverage runs to 922 places, and Ware is one of them. You can also see our page for Chelmsford, roughly 45 miles from Ware.
Every address in CT3 is covered for regrouting, from the main roads to the quietest streets. Close by, we work in Westmarsh (1 mile north), East Stourmouth (2 miles north-west), Preston (2 miles west), West Stourmouth (2 miles north-west) and Hoo (3 miles north-east). Larger places within reach include Canterbury (8 miles west), Margate (7 miles north-east), Dover (11 miles south), Ramsgate (7 miles north-east), Broadstairs (8 miles north-east) and Whitstable (11 miles west).
Near you in Ware
Around Ware, our work takes us to homes and buildings near The Way Out Inn and the streets around them. The nearest railway station is Minster station, about 2.9 miles north-east of the centre. Other landmarks nearby include White Mill (2.9 miles south-east). Open spaces near Ware include Monk's Wall nature reserve.
Ware: your questions answered
Do you cover smaller places like Ware?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is Ware in your area for regrouting?
Yes. Our work covers London and the South East, and Ware is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job, and we’ll send you a clear quote.
Will there be a smell?
It depends on the product. Some smell for a while, some hardly at all, and any smell fades as they cure.
Can I do it myself?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.
How long does the job take?
That depends on how much there is to do, but most jobs take anything from a few hours to a full day, depending on the area. We’ll tell you when we quote.
Can new sealant go over the old?
No. We remove every bit of old sealant first, so the new joint bonds to clean surfaces.
What guarantee comes with the work?
There’s a 12-month guarantee on every job, including regrouting.
Should corners be grouted or sealed?
Internal corners and edges are sealed with flexible silicone. Grout in a moving joint soon cracks.
What we’re called out for in Ware
When tiles or the wall behind them move, the grout cracks. Loose tiles, bouncy floors and timber walls can all do it, so we check the tiles before work begins.
Signs it’s time to call us include:
- Greasy, stained grout behind the hob
- Grout stained black or orange that won’t clean
- Corners filled with grout instead of silicone
- Floor grout that won’t come clean
Around Ware, as everywhere, regrouting is only as good as the preparation behind it.
What to look for in a quote
- What happens if the job turns out different
- Whether you can choose the colour
- Whether VAT is included
- Whether they’re fully insured
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
How we quote for regrouting
You’ll get a clear quote before we start. It’s based on:
- The number and length of the joints
- Whether the work is at height
- Whether there’s mould to deal with
- How much old sealant there is and how hard it is to remove
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Ask us for a quote and we will explain what it covers.
Helping us quote
To make quoting easier, please include:
- Any access issues, like height or stairs
- How many joints, rooms or windows are involved
- The type of property
- Any previous sealing or DIY work
We quote each job on its own, so the first step is telling us about yours. Simply ring 0345 464 0079 or email us and describe the job and send pictures if you have them.
When something else is needed
We won’t take on work that will not last, so here’s what sealant can’t put right:
- Tiles that are loose or hollow behind
- Damaged tiles that need replacing
- Movement in a stud wall or floor
If in doubt, ring 0345 464 0079 or send us an email and we will say what we think.
What we seal
- Tiled floors
- Bathroom floors
- Wet rooms
- Bathroom wall tiles
- Kitchen splashbacks
- Shower walls