Kent · England
Regrouting in Sevenscore, Kent
Regrouting across Sevenscore and nearby, with old sealant always removed completely.
- A grout colour that no longer suits the room
- Good tiles let down by tired grout
- Grout that stays dark however much it’s cleaned
About our regrouting in Sevenscore
We work across Sevenscore, regrouting bathrooms, showers and kitchens. Out comes the old grout, the joints are cleaned and new grout goes in, and we finish by resealing the edges. If you’re dealing with crumbling grout between the tiles and grout washed out of a shower, we can help.
Around Sevenscore, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
You get a 12-month guarantee, the same in Sevenscore as everywhere else we work.
- Location
- Sevenscore (CT12)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Quotes
- A clear price before work begins
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Common questions in Sevenscore
Can you do regrouting in Sevenscore?
Yes. Our work covers London and the South East, and Sevenscore is part of that. You can call 0345 464 0079 or drop us an email and let us know what needs doing.
Can you help a landlord with a rental near Thanet Parkway station?
Yes, landlords and agents are among the people we work for. Just phone 0345 464 0079 or drop us an email with the address and what needs doing, and we will give you a clear price.
Do the sealants smell?
Sometimes, a little. It fades as the sealant cures, and ventilation helps.
Will the sealant be renewed as well as the grout?
Most of the time, yes. Grout and sealant do different jobs, so we renew both and it’s all in the quote.
Do you regrout part of a bathroom, like the shower?
Yes, we often do. The shower normally fails first, so many people regrout just that part.
Can you work on commercial sites?
Yes, regularly. We can plan bigger jobs in stages.
Do you guarantee regrouting?
Every job comes with our 12-month guarantee.
Do you remove the old sealant?
Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.
Honest limits
We’d rather tell you now than do work that won’t last, so these are the limits:
- Damaged tiles that need replacing
- A floor or wall that keeps moving
- Failed tanking or waterproofing under the tiles
Not sure which it is? You can phone 0345 464 0079 or send us an email and we’ll tell you honestly before booking.
Joints and surfaces we work on
- Wet rooms
- Tiled floors
- Bathroom wall tiles
- Shower walls
- Kitchen splashbacks
- Bathroom floors
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What affects the cost of regrouting
Every job gets its own quote. This is what makes a difference:
- When we can work, for business premises
- The old material and how stubborn it is
- The product the joint needs
- The number and length of the joints
Combining jobs into one visit normally makes better use of the time than several visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
What to tell us for a quote
There’s no need for technical detail. It helps if you can tell us:
- How we’d reach the joints
- The rough size of the job
- The problem you’ve noticed
- Any previous sealing or DIY work
For a quote, call 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. We’ll give you a clear quote before any work starts.
Common problems we fix in Sevenscore
Grout is porous, so water, soap and grime soak into it. Given time, it discolours and begins to break down, especially in a shower that is used every day.
Signs it’s time to call us include:
- Grout that is cracking and breaking up
- Kitchen splashback grout stained by grease
- Discoloured grout on otherwise sound tiles
- Shower grout that has worn away
Letting a property close to Thanet Parkway station? Then clean grout and fresh sealant between tenancies make a bathroom look cared for again.
Questions to ask before you book
- Which colour the sealant will be
- What the quote includes, VAT included or not
- How much experience the applicator has
- How long to leave it before use
Regrouting in Sevenscore: local notes
Sevenscore is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Homes close to St Mary include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
Sevenscore is about 3 miles west of Ramsgate, in Kent. We provide regrouting to householders, landlords and businesses in Sevenscore. Across Kent, we cover 922 places, and Sevenscore is one of them. We also work in Chelmsford, around 47 miles away.
All of CT12 is within our area for regrouting, from the main roads to the quietest streets. We also cover the places around Sevenscore: Cliffs End (1 mile east), Way (1 mile north-west), Ebbsfleet (1 mile south), Richborough Port (2 miles south) and Manston (2 miles north-east). We also work in nearby towns such as Canterbury (12 miles west), Margate (4 miles north-east), Dover (13 miles south), Ramsgate (3 miles east), Broadstairs (4 miles north-east) and Whitstable (14 miles west).
Landmarks near Sevenscore
In Sevenscore, that means homes and buildings near The Sportsman pub and Sandwich and Pegwell Bay. For rail, the closest station is Thanet Parkway station, roughly 0.7 miles east of the centre. Nearby you’ll also find Westwood Cross (3 miles north-east) and Ramsgate General Hospital (2.8 miles east). The countryside around Sevenscore includes Sandwich and Pegwell Bay.
How it works
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The job generally takes anything from a few hours to a full day, depending on the area, including the tidy-up. In a small place like Sevenscore, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We check the tiles are sound and flag any that are loose or hollow.
- We rake out the old grout to an even depth, taking care of the tile edges.
- The joints are vacuumed and cleaned.
- New grout is worked into the joints and cleaned off the tile faces.
- The corners and edges get new silicone, because grout there would crack.
How to prepare
- Mention any tricky access
- Try not to wet indoor joints just before the visit
- Clear the area around the work
Ask for a quote
If you’re in Sevenscore and need regrouting, ring 0345 464 0079 or send us an email. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Read more
For landlords and businesses
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Towns and villages near Sevenscore
What else we do in Sevenscore
Looking after it afterwards
Simple care keeps the joints in good condition. Our advice:
- Have loose tiles looked at early
- Give the walls a quick rinse after use
- Use a squeegee on the tiles after showering
- Run the extractor fan during and after a shower
Have any tile that moves checked right away. A loose tile cracks the grout around it and lets water in.
Grout that stays dark after cleaning is starting to fail. Regrouting at this stage is straightforward, before the joints open up.