Kent · England
New Build Mastic in Sevenscore
Professional new build mastic in and around Sevenscore, with old sealant always removed completely and a 12-month guarantee.
- Cracks appearing as a new home settles
- Sealant work across a run of new homes
- Beads laid onto grit and dust from the build
New homes and floors in Sevenscore
Sevenscore is close to the coast. Plot mastic on new homes near the coast takes more weather than it would inland, so it’s worth checking at snagging. London and the South East are among the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Around Sevenscore, as everywhere, new build mastic is only as good as the preparation behind it. For new homes near Thanet Parkway station, it’s worth checking the sealant early, while snags are still fresh.
Sevenscore is about 3 miles west of Ramsgate, in Kent. Sevenscore gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. We cover 922 towns and villages across Kent, from the larger towns to small villages. Our Chelmsford page covers work nearby (47 miles or so).
Jobs for new build mastic in CT12 is quoted and booked the same way as anywhere else. Other places close to Sevenscore include Cliffs End (1 mile east), Way (1 mile north-west), Ebbsfleet (1 mile south), Richborough Port (2 miles south) and Manston (2 miles north-east). Further out, we also cover Canterbury (12 miles west), Margate (4 miles north-east), Dover (13 miles south), Ramsgate (3 miles east), Broadstairs (4 miles north-east) and Whitstable (14 miles west).
Local landmarks in Sevenscore
In Sevenscore, that means homes and buildings near The Sportsman pub and Sandwich and Pegwell Bay. The closest station to Sevenscore is Thanet Parkway station, roughly 0.7 miles east. Well-known places in the area include Westwood Cross (3 miles north-east) and Ramsgate General Hospital (2.8 miles east). Green spaces nearby include Sandwich and Pegwell Bay.
New build mastic in Sevenscore, done properly
New homes move as they dry out. Timber dries and shrinks, and baths and trays settle, so sealant that was laid quickly before handover often cracks. We work on windows & doors, show homes and skirting & floors, and common reasons people get in touch are new-build shower sealant that has already split and second-fix sealing on new plots.
Older homes in small places like Sevenscore often have timber floors that move with the seasons, so skirting and threshold joints need a flexible sealant rather than a rigid filler.
Our work is backed for twelve months.
- Where
- Sevenscore (CT12)
- Region
- Kent
- Cover
- One year on every job
- Price
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Places near Sevenscore
What else we do in Sevenscore
How the job changes by surface
Plot handovers
Taking time over preparation reduces return visits. Dust from the build is removed first and primer used where needed.
Skirting and floors
Wet-area floor joints need a flexible seal. They get a flexible, water-resistant sealant.
Leave it or put it right?
For developers, getting the sealant right first time saves return visits. Snagging visits for failed sealant cost time on every plot and most come down to preparation. Where a wall is exposed, as many are in small places like Sevenscore, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
The cost depends on the size of the job, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts, so you know where you stand.
Why us?
- Neat joints and a tidy finish
- Domestic, commercial and hotel work
- We never seal over old sealant
- Rated 4.9 stars on Google
See how sealant jobs are priced and our reviews.
DIY versus a professional finish
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so just mention it when you contact us.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Sevenscore: your questions answered
Is Sevenscore within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you do new build mastic in Sevenscore?
Yes, Sevenscore is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or email us with a few details of the job.
Do you work for landlords and businesses?
Yes, we do. Domestic, commercial and hotel work are all part of what we do.
Can you work on commercial sites?
Yes. Larger jobs can be planned room by room or area by area.
How long before the joint can be used?
That depends on the sealant used, so please follow the time we give you.
How much does new build mastic cost in Sevenscore?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote.
Should I go to my builder first?
Start with the builder if you’re in the snagging or warranty period. If it is not resolved, we can reseal it properly.
Is it messy?
No. The area is protected while we work and cleaned up afterwards.
Aftercare tips
A little care helps the new joints last. Our advice:
- Photograph failed sealant before it’s redone
- Keep water off fresh sealant until it has cured
- Watch for new gaps as the house dries out
- Ventilate bathrooms well, especially in the first year
Ventilation matters in a new home, which is still drying out. Run the fan or open a window after bathing to help keep mould away.
Don’t let the snagging period run out with sealant problems unreported. After that, putting it right may fall to you.
What affects the cost of new build mastic
You will get a clear quote before any work starts. It takes into account:
- How many rooms, windows or areas are involved
- The type of sealant required
- Any mould that needs treating
- When we can work, for business premises
Leaving a failed joint generally makes the job bigger, not smaller, because water and mould keep working on it. If you are unsure, call 0345 464 0079 or drop us an email for an honest opinion and a quote.
What we need to know
When you contact us, these details help:
- What’s wrong with the joints now
- Access, such as stairs, a lift or height
- The address or postcode of the job
- The type of property
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. Whenever you’re ready, phone 0345 464 0079 or drop us an email.
How it works
At the end, we look at the finished work together. The visit itself normally takes a few hours for most snagging lists, longer for a run of plots, depending on the size of the job. In a small place like Sevenscore, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We look at why each joint failed, including any movement.
- Old sealant is cut out and the joints cleaned.
- We make sure the joints are dry and prime them if needed.
- New sealant goes in, with baths filled first so they’re at their heaviest.
- The finished joints are checked and the cure times given.
Before we arrive
- Clear the area around the work
- Let us know about earlier repairs to the joints
- Tell us about access, such as stairs, a lift or high-level joints
Get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that’s easy.
Related advice
What we cannot put right
Sealant isn’t the answer to every problem, and we’d rather say so up front. Sealant won’t put right:
- Disputes or warranty claims with your builder
- Damaged fittings that need replacing
- Leaking fittings rather than failed sealant
If you’re not sure, just phone 0345 464 0079 or send us an email and we will give you a straight answer.
Where we work in Sevenscore
- Windows & doors
- Bathrooms & en suites
- Show homes
- Plot handovers
- Skirting & floors
- Kitchens