Surrey · England
Pyrford Regrouting
Professional regrouting in and around Pyrford, with every bit of old sealant taken out first.
- Shower grout that has worn away
- Grout in corners that has cracked
- Grout that stays dark however much it’s cleaned
Aftercare tips
A little care helps the new joints last. We recommend:
- Clean with a soft brush, not anything metal
- Open a window or run the fan to clear steam
- Wipe or squeegee the shower walls
- Check the corner silicone every few months
A squeegee or cloth over the tiles after use stops soap and water sitting on the grout. Run the extractor fan or open a window so the grout dries between uses.
Tiles can come away if failed grout is left. By then, new grout alone isn’t enough, so it’s worth acting early.
Regrouting for homes and businesses in Pyrford
We take the old grout out to a consistent depth, without damaging the edges of the tiles. After vacuuming, new grout goes in and the tiles are wiped clean, with silicone renewed in the corners. We are often asked to deal with grout that makes sound tiles look old and shower grout that has worn away, across tiled floors, shower walls and kitchen splashbacks.
In and around Pyrford, older properties sit alongside newer ones. Older homes can move a little with the seasons, which is hard on tired sealant and rigid grout.
Big or small, you get the same 12-month guarantee.
- Location
- Pyrford (GU22, KT14)
- Wider area
- Surrey
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
What the job involves on each surface
Wet rooms
Wet rooms have water across the floor, so good grout is important. We check the tiles first.
Corners and edges
The joint between tiles and a bath, tray or worktop gets silicone. Grout there would crack.
Bathrooms and kitchens in Pyrford
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you look after a building such as Pyrford Church of England Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes. Letting a property close to West Byfleet station? Then clean grout and fresh sealant between tenancies make a bathroom look cared for again. For an older house near a landmark such as Church of the Good Shepherd, older homes can move a little, which is hard on rigid grout and tired sealant.
Pyrford is about 3 miles east of Woking, in Surrey. From the centre of Pyrford to the outskirts, regrouting is available for homes and businesses alike, from flats and houses to offices and hotels. 395 places in Surrey are on our list, large and small. You can also see our page for Crawley, about 20 miles away.
We cover every part of the GU22 and KT14 postcode area for regrouting. Local streets include Pyrford Woods Close, Pyrford Woods Road and Onslow Way, and we cover them all. We also cover Sheerwater (1 mile north-west), West Byfleet (1 mile north-east), Pyrford Village (1 mile south), Woodham (1 mile north) and Old Woking (2 miles south-west). We also work in nearby towns such as Guildford (6 miles south-west), Woking (3 miles west), Camberley (9 miles west), Epsom (11 miles east), Farnham (15 miles south-west) and Ewell (11 miles east).
Local landmarks in Pyrford
Locally, jobs take us to homes and businesses close to The Bishop David Brown School, The Station pub and The Bishop David Brown School and the streets around them. The closest station to Pyrford is West Byfleet station, about 1 mile north-east. A little further out are Woking Community Hospital (2 miles south-west) and The Peacocks (2 miles west). The countryside around Pyrford includes Papercourt Marshes and St Ann's Hill.
DIY sealant or a professional job?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Questions from Pyrford
Do you cover smaller places like Pyrford?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
I let a flat near West Byfleet station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can phone 0345 464 0079 or drop us an email with the details for a clear quote.
Do you hold any approvals?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Could my grout be a different colour after regrouting?
Yes. Many clients do. A darker grout hides marks better, while lighter grout brightens a room.
What do you put in the joint?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.
How long does regrouting take?
A typical job takes a few hours for a shower enclosure, longer for a whole room. Your quote will say how long we expect yours to take.
Will you leave a mess?
Tidy work is part of the job. Nearby surfaces are protected, and we clear up when we are done.
Can you regrout if a few tiles are loose?
Tiles that have come away need sorting first. We will point them out at the start.
For landlords and businesses
If you manage several properties in or around Pyrford, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and photos by email help.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
How it works
There isn’t much for you to do on the day. Point us to the joints and we will get on with it. The job generally takes a few hours, or longer for a fully tiled room. A visit to Pyrford is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We check the tiles are sound and flag any that are loose or hollow.
- We rake out the old grout to an even depth, taking care of the tile edges.
- The joints are vacuumed and cleaned.
- Fresh grout goes into the joints and the tile faces are wiped clean.
- Corners and edges are resealed with flexible silicone, not grout.
Preparing for the visit
- Clear the area around the work
- Let us know if you’ve seen damp or leaks
- Let us know about earlier repairs to the joints
How to get a quote
There’s no standard price list. Instead, we give you a clear quote for your job. To get started, phone 0345 464 0079 or send us an email.
Related advice
When something else is needed
It helps to know what we cannot do too:
- Movement in a stud wall or floor
- A leaking shower valve or waste
- Tiles that have come away from the wall
If in doubt, phone 0345 464 0079 or email us and we will say what we think before you book.
Joints and surfaces we work on
- Bathroom floors
- Wet rooms
- Shower walls
- Bathroom wall tiles
- Kitchen splashbacks
- Tiled floors
Leave it or put it right?
If tiles are loose, regrouting alone isn’t the answer. We’ll tell you before work begins so you know what’s involved. Where the tiles are sound, regrouting is far less disruptive than retiling. Around Pyrford, water from a failed joint in an older home can soak into timber and plaster, which is far harder to put right than the sealant itself.
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What you get with us
- Fully insured
- Neat joints and a tidy finish
- Approved under the ARBOMaster scheme
- 4.9 on Google from 180+ five-star reviews
See what affects the cost and customer reviews.