Glasgow · Scotland
Regrouting in Parkhouse, Glasgow
Regrouting across Parkhouse and nearby, with old sealant always removed completely and a 12-month guarantee.
- Grout that is cracking and breaking up
- Floor grout that will not come clean
- Stained grout that cleaning won’t shift
Surface by surface
Wet rooms
Regrouting a wet room helps keep water on the surface of the tiles. It can’t fix waterproofing below the tiles.
Bathroom wall tiles
Grout by the basin and bath tends to mark first. We can do part of a wall or all of it.
About our regrouting in Parkhouse
Our applicators rake out the old grout to an even depth, taking care not to chip the tile edges. After vacuuming, new grout goes in and the tiles are wiped clean, and the corners get fresh silicone. We work on bathroom floors, tiled floors and wet rooms, and people most often call us about cracked grout along the bath or tray and kitchen splashback grout stained by grease.
Bathrooms in smaller places like Parkhouse work just as hard as those in the cities. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we will put it right.
- Location
- Parkhouse (G22, G20, G21)
- Wider area
- Glasgow
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Aftercare tips
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Wipe or squeegee the shower walls
- Look at the sealant in the corners now and then
- Do not ignore a tile that feels loose
- Keep harsh bleach and acid cleaners off the grout
Give the new grout the time we tell you before using the shower, so it cures fully. After that, rinse the tiles after showering and keep the room ventilated.
Cracked grout does not stay cracked for long. Water gets behind the tiles, and they can begin to come away and early regrouting can avoid a much bigger job.
What regrouting looks like in Parkhouse
Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Tired, leaking sealant is worth putting right before a new tenant moves in. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
For landlords with property near Ashfield station, a regrout while the flat is empty is quicker than working around a tenant. For site and facilities teams at buildings such as St. Roch's Secondary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Parkhouse is about 1 mile north-east of North Kelvinside, in Glasgow. From the centre of Parkhouse to the outskirts, regrouting is available for homes and businesses alike, from flats and houses to offices and hotels. Parkhouse is one of 183 towns and villages in Glasgow where we work.
Jobs for regrouting in G22, G20 and G21 works the same way as everywhere else we cover. Whether your property is on Birsay Road, Walnut Road and Balmore Road or a nearby road, our applicators can take on the job. Main roads around Parkhouse include the A879, which makes travel easy. We also cover the places around Parkhouse: Possilpark (1 mile south), Milton (1 mile north), Lambhill (1 mile west), Cowlairs (1 mile south-east) and Ruchill (1 mile west). Further out, we also cover Glasgow (3 miles south), Calton (3 miles south), Langside (5 miles south), Yoker (5 miles west), Partick (3 miles south-west) and Mount Florida (5 miles south).
Local landmarks in Parkhouse
Typical jobs here are in homes near Glasgow University Library and Springburn Park. Parkhouse has its own railway station: Ashfield station. A little further out are Ruchill Hospital (0.6 miles south-west) and Heatherbank Museum of Social Work (1.6 miles south). Green spaces nearby include Hogganfield Loch and Castle Hill.
Places near Parkhouse
What else we do in Parkhouse
Should I try it myself first?
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Landlord and commercial work in Parkhouse
For anyone letting property in or around Parkhouse, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and pictures by email help.
We also work for property managers and facilities teams in Parkhouse and across Glasgow. Several sites can go on one quote, and we’re fully insured for the work.
What happens if it’s left?
With regrouting, your tiles stay where they are. Retiling is a much bigger job: stripping, making good, new tiles and new grout, and the room is out of use for longer. If the tiles are sound, regrouting is the simpler fix. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.
What you get with us
- 180+ five-star Google reviews
- Fully insured
- We leave the area clean and tidy
- Quality sealants from Arbo and Everbuild
Take a look at how sealant jobs are priced or our reviews.
Your questions about regrouting in Parkhouse
Do you cover Parkhouse for regrouting?
Yes, Parkhouse is within the area we cover. We work across all of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job, and we will give you a clear price.
I let a flat near Ashfield station. Can you help?
Yes, rental work is part of what we do. Just email us at info@mrmastic.co.uk and tell us about the property, and we’ll give you a clear price.
What do you put in the joint?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we’ll tell you what we are using.
When can I use the shower again?
You’ll get a clear time from us before we go. Both the grout and the silicone need time to cure before they get wet.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
How do I get a quote for regrouting in Parkhouse?
We don’t publish prices, because the cost depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
What should I tell you?
A short description and the location, plus pictures if you have them. We’ll ask anything else we need to know.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned.
What happens on the day
Before we leave, we go over the finished joints with you. The work normally takes anything from a few hours to a full day, depending on the area, depending on the size of the job. Outdoor work around Parkhouse depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- We check the tiles for any that are hollow or loose.
- The old grout is removed to an even depth.
- The joints are vacuumed clean.
- New grout is pressed into the joints and the tiles are cleaned.
- We finish with silicone in the moving joints.
Preparing for the visit
- On commercial sites, let us know about site rules
- Clear items away from the joints we’re working on
- Let us know about earlier repairs to the joints
Get a quote
Getting a quote is simple: let us know the job and the location. A few photos by email make the job easier to understand.
Related advice
How we quote for regrouting
Every job gets its own quote. This is what makes a difference:
- When we can work, for business premises
- Whether old sealant or filler has to be cut out
- Mould in or behind the old joints
- How much there is to do
The cost depends on the amount of work, how hard the old material is to remove and access to the work. You will have a clear quote before any work starts.
Helping us quote
When you contact us, these details help:
- The problem you’ve noticed
- Any access issues, like height or stairs
- How many joints, rooms or windows are involved
- A few pictures by email, if you can
To get a quote, drop us a line at info@mrmastic.co.uk with the location and a short description of the problem. You will have a clear quote before any work starts.