Essex · England

Regrouting in Moulsham, Essex

Raking out old, cracked or stained grout and regrouting tiled walls and floors in Moulsham, with a 12-month guarantee on every job. Call for a quick quote.

  • Floor grout that has worn and darkened
  • Grout in corners that has cracked
  • Greasy, stained grout behind the hob

Trusted regrouting in Moulsham

Regrouting in Moulsham

We take the old grout out to a consistent depth, taking care not to chip the tile edges. After vacuuming, new grout goes in and the tiles are wiped clean, and the corners get fresh silicone. We are often asked to deal with gaps where the shower grout has gone and floor grout that won’t come clean, across bathroom floors, wet rooms and tiled floors.

In and around Moulsham, older properties sit alongside newer ones. In older homes, walls and floors can move a little more, so the right flexible sealant matters.

The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we’ll put it right.

Mr Mastic applicator sealing the vertical joint between a glass shower screen and tiled wall
Where
Moulsham (CM2, CM1)
Wider area
Essex
Cover
A year, on every job
Quote
Quoted before any work starts
Phone
0345 464 0079
Updated
26 October 2026

DIY sealant or a professional job?

Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.

Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.

Aftercare tips

Looking after new joints is easy:

  • Skip wire brushes and scourers
  • Don’t ignore a tile that feels loose
  • Stick to mild products for cleaning grout
  • Open a window or run the fan to clear steam

Have any tile that moves checked straight away. A loose tile cracks the grout around it and open a path for water.

Small problems with grout are quick to put right. Left, the same problem can let water through, so get it looked at when you notice it.

Moulsham questions

Is Moulsham within the area you cover?

Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

I let a flat near Chelmsford station. Can you help?

Yes, we work for letting agents and landlords. Just call 0345 464 0079 or send us an email and tell us about the property, and we will send you a clear quote.

How soon can the shower be used after regrouting?

The wait depends on the materials and how warm the room is. We will tell you exactly how long when the job is done.

Do I need to be at home?

We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.

How long does regrouting take?

Most jobs take a few hours for a shower enclosure, longer for a whole room, including the preparation. We will confirm how long when we quote.

Will regrouting fix loose tiles?

Regrouting will not fix loose tiles. We flag any loose or hollow tiles before starting, so you can decide what to do.

Do you reseal at the same time?

Most of the time, yes. Grout fills tile gaps and sealant handles the moving joints, so both are renewed and include it in your quote.

Do the sealants smell?

Some sealants have a smell while they cure, but it fades. Ventilation helps.

Landlords, agents and businesses in Moulsham

A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.

Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.

When to call us in Moulsham

Some grout fails because it was mixed or laid badly. If it was mixed too wet or not pressed in firmly tends to wash out early.

Signs it’s time to call us include:

  • Grout that is cracking and breaking up
  • Good tiles let down by tired grout
  • Grout washed out of a shower
  • Splashback grout that has darkened

Rented homes near Chelmsford station change hands often, and stained grout drags a rental down, and regrouting between lets puts that right.

What to look for in a quote

  • Who does the work, and how experienced they are
  • What product goes in the joint
  • Whether they seal over old material or remove it
  • Which colour the sealant will be

10 questions to ask before you book

Why deal with it now?

Grouting over old grout rarely lasts. A thin skin on top tends to break off, taking any repair with it. Removing the old grout to an even depth lets the new grout key in properly. Homes in smaller places like Moulsham can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.

There are no prices on our website, because each job is priced on what it involves. Call for a quick quote.

Why book with us

  • Sanitary silicone with an anti-fungal additive in wet areas
  • We’re fully insured
  • More than 20 years in sealant work
  • Trusted Arbo and Everbuild sealants

Read our cost guide or customer reviews.

What the job involves on each surface

Bathroom floors

Cracked floor grout can point to movement underneath. We look for loose tiles first.

Kitchen splashbacks

The grout by the hob and sink takes most of the mess. We renew the grout and the worktop sealant.

Regrouting around Moulsham

Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in. There are hotels and other places to stay in and around Moulsham. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.

If you live in an older home near Church of St John the Evangelist, timber floors under older bathrooms flex, so joints need a sealant that moves with them. For site and facilities teams at buildings such as Our Lady Immaculate Catholic Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.

Moulsham is about 1 mile south-west of Chelmsford, in Essex. We provide regrouting to homeowners, landlords and businesses in Moulsham and nearby, as part of our work across Essex. Our area takes in 644 places across Essex, from the larger towns to small villages.

Postcode districts we cover here for regrouting: CM2 and CM1. If you need regrouting at a property on Elm Road, York Road and Lady Lane or a nearby road, we can help. Being close to the A1060 and A1099, Moulsham is easy for our applicators to reach. Close by, we work in Chelmsford (1 mile north-east), Widford (1 mile south-west), Patching (2 miles north), Writtle (2 miles west) and Chignall St James (3 miles north-west). Larger places within reach include Basildon (11 miles south), Braintree (11 miles north), Harlow (15 miles west), Brentwood (10 miles south-west), Maldon (9 miles east) and Canvey Island (15 miles south).

Landmarks near Moulsham

Around Moulsham, our work takes us to homes and buildings near Moulsham High School, Chelmsford College and Oaklands Park and the streets around them. Nearby too are Our Lady Immaculate Church (less than half a mile north) and The Anchor Public House (less than half a mile north-east). Moulsham’s nearest station is Chelmsford station, roughly 0.6 miles north. Other landmarks nearby include Bond Street Chelmsford (0.6 miles north-east) and Peter Edwards Museum And Library (less than half a mile north). Green spaces nearby include Newland Grove.

Map of Moulsham © OpenStreetMap contributors

The process

When we arrive, we start by going over the job with you, so you know exactly what we’re doing. Surfaces next to the work are protected before work begins. The work generally takes a few hours, or longer for a fully tiled room. A visit to Moulsham is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.

  1. Every tile area is checked for hollow or loose tiles first.
  2. The old grout is removed to an even depth.
  3. We vacuum the joints so the new grout bonds.
  4. We regrout the joints and clean the tile faces.
  5. Silicone goes into the corners and along the edges.

Getting ready for the visit

  • Move anything stored near the joints
  • Mention if the joints have been sealed before
  • Mention any leaks or damp you’ve noticed

Ask for a quote

It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, call 0345 464 0079 or drop us an email.

Get a price

Advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job