Kent · England

Regrouting in Lullingstone, Kent

Regrouting for Lullingstone, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.

  • Corners filled with grout instead of silicone
  • Floor grout that has worn and darkened
  • Gaps where the shower grout has gone

Regrouting for Lullingstone homes and businesses

Questions from Lullingstone

Is Lullingstone in your area for regrouting?

Yes, Lullingstone is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or email us and tell us what needs doing.

Do you cover smaller places like Lullingstone?

Yes, Lullingstone is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.

Do you work for letting agents?

Yes, regularly. Several properties can go on one quote.

How long does the job take?

Most jobs take a few hours for a shower enclosure, longer for a whole room, including preparation and clearing up. We will confirm how long when we quote.

Can you do several jobs on one visit?

Yes. Tell us about everything you’d like done and you will get one quote.

Can I do it myself?

For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.

What do you put in the joint?

Products from Arbo and Everbuild, among others, chosen to suit the joint. We will tell you what we’re using and why.

Can new sealant go over the old?

No. We remove every bit of old sealant first, so the new joint bonds to clean surfaces.

Regrouting for homes and businesses in Lullingstone

If you’ve been scrubbing grout that won’t come clean, the stain is often in the grout itself. New grout is the fix that lasts, and it’s a chance to change the colour too. If you are dealing with grout that stays dark however much it’s cleaned and cracked or crumbling grout lines, we can help, whatever the surface.

Around Lullingstone, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.

The work is covered for a year after we finish. If anything is not right with it, call 0345 464 0079 or send us an email.

Mr Mastic applicator sealing the vertical joint between a glass shower screen and tiled wall
Where
Lullingstone (DA4)
Wider area
Kent
Cover
A year, on every job
Price
Quoted before any work starts
Call
0345 464 0079
Last updated
26 October 2026

Looking after it afterwards

Joint life depends on how it’s used and looked after. We suggest:

  • Don’t use strong acidic cleaners on grout
  • Open a window or run the fan to clear steam
  • Rinse soap off the tiles after each shower
  • Skip wire brushes and scourers

Leave the area unused for as long as we advise, so it can harden properly. From then on, a quick rinse after showering helps and let the room air.

If grout in the shower is washing out, act soon. Every shower pushes more water into the gaps, and that water can reach the wall or the floor below.

Different surfaces, different methods

Shower walls

Shower walls are the most common area we regrout. Cracked or missing grout here lets water behind the tiles.

Corners and edges

Internal corners move, so they get silicone, not grout.

What affects the cost of regrouting

The quote reflects the job in front of us. We look at:

  • How many rooms, windows or areas are involved
  • Working hours on commercial sites
  • Whether old sealant or filler has to be cut out
  • The product the joint needs

The cost depends on how much there is to do, how much old material has to come out and access to the work. We give a clear quote before we start.

What to tell us for a quote

Photos help, but a description is a good start. Try to tell us:

  • If it’s domestic, commercial or a hotel
  • The problem you’ve noticed
  • Photos by email, if that’s easy
  • How many joints, rooms or windows are involved

Quotes start with a quick conversation. Describe the problem, the location and the size of the job. Whenever you’re ready, ring 0345 464 0079 or send us an email.

When something else is needed

Some problems need a builder, plumber or other trade rather than us:

  • Tiles that are loose or hollow behind
  • A floor or wall that keeps moving
  • A leaking wet room membrane

Not sure which it is? You can phone 0345 464 0079 or send us an email and we will tell you honestly.

What we seal

  • Shower walls
  • Kitchen splashbacks
  • Wet rooms
  • Bathroom wall tiles
  • Tiled floors
  • Bathroom floors

Why deal with it now?

Regrouting will not help where tiles have come away. We point that out first so you know what’s involved. Where the tiles are sound, regrouting is far less disruptive than retiling. Around Lullingstone, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.

What you pay reflects the work, not a rough estimate. That is why we ask about the job first and agree the price before starting.

Why Lullingstone clients choose us

  • Experience in homes, commercial sites and hotels
  • 20+ years of sealant experience
  • ARBOMaster approved applicator
  • Sanitary silicone with an anti-fungal additive in wet areas

Take a look at how sealant jobs are priced or what customers say.

The process

We bring everything the job needs with us. After a quick look at the joints together, we protect the area and start. It normally takes a few hours, or longer for a fully tiled room. In a small place like Lullingstone, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. First, we check for loose or hollow tiles and point out any we find.
  2. The old grout comes out to a consistent depth, without damaging the tiles.
  3. We vacuum the joints and clean out the dust.
  4. We fill the joints with new grout, then clean the tiles.
  5. We reseal the internal corners and edges with silicone.

How to prepare

  • Tell us about any water getting in
  • Plan for the work area to be out of bounds to pets and children
  • Tell us if parking is tricky

Getting a quote

We quote each job on its own, so the first step is telling us about yours. Simply call 0345 464 0079 or drop us an email and describe the job and send photos if you have them.

Ask for a quote

Related advice

Signs you need regrouting in Lullingstone

Grout that was put in corners cracks as the bath or tray moves. Those joints should be silicone, and if they’re grouted, a crack soon lets water in.

Signs it’s time to call us include:

  • Grout that is cracking and breaking up
  • Greasy, stained grout behind the hob
  • Grout stained black or orange that will not clean
  • Good tiles let down by tired grout

If you let a flat or house near Eynsford station, a regrout while the flat is empty is quicker than working around a tenant.

What to look for in a quote

  • How much experience the applicator has
  • Is the old sealant removed completely?
  • What guarantee comes with the work
  • How the surfaces are prepared before sealing

How to choose a mastic man

What regrouting looks like in Lullingstone

Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.

For an older house near a landmark such as Church of Saint Botolph, timber floors under older bathrooms flex, so joints need a sealant that moves with them.

Lullingstone is about 3 miles south of Swanley, in Kent. Homes, rented property, offices and hotels in Lullingstone is covered for regrouting, old or new, large or small. Every job comes with our one-year guarantee. Our Kent coverage runs to 922 places, Lullingstone among them. There’s also a page for London, about 16 miles away.

Here we cover the DA4 postcode area for regrouting. If you’re just outside Lullingstone, we cover Shoreham (2 miles south), Well Hill (2 miles west), Crockenhill (2 miles north-west), Maypole (2 miles west) and Bopeep (2 miles west). We also work in nearby towns such as Dartford (6 miles north), Sevenoaks (5 miles south), Gravesend (9 miles north-east), Tonbridge (12 miles south), Northfleet (8 miles north-east) and Swanley (3 miles north).

Near you in Lullingstone

In Lullingstone, that means homes and buildings near The Malt Shovel pub and Raspberry Hall Park. Lullingstone’s nearest station is Eynsford station, roughly 0.6 miles north-east of the centre. Other landmarks nearby include Lullingstone Castle (less than half a mile east) and Orpington Hospital (4.2 miles west). Green spaces nearby include The Warren.

Map of Lullingstone © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job