North Ayrshire · Scotland

Kilmory Regrouting

Specialist regrouting for Kilmory: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.

  • Greasy, stained grout behind the hob
  • Crumbling grout between the tiles
  • Floor grout that will not come clean

Trusted regrouting in Kilmory

How we handle regrouting in Kilmory

Stained, crumbling or cracked grout can make a sound bathroom look tired. Regrouting replaces the grout and keeps the tiles you have, so nothing is ripped out. We work on bathroom floors, kitchen splashbacks and bathroom wall tiles, and the jobs we see most are cracked or crumbling grout lines and gaps where the shower grout has gone.

Bathrooms in smaller places like Kilmory work just as hard as those in the cities. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.

There’s a 12-month guarantee on every job.

Mr Mastic applicator kneeling beside a white bath, sealing the joint where the bath meets beige wall tiles
Where
Kilmory (KA27)
Wider area
North Ayrshire
Cover
12 months on all our work
Quotes
A clear quote up front
Email
info@mrmastic.co.uk
Last updated
26 October 2026

What we cannot put right

We will not take on work that will not last, so here’s what sealant can’t put right:

  • A structure that flexes behind the tiles
  • A leaking shower valve or waste
  • Failed tanking or waterproofing under the tiles

Not sure which it is? You can email us at info@mrmastic.co.uk and we will tell you honestly before booking.

What we seal

  • Bathroom wall tiles
  • Bathroom floors
  • Wet rooms
  • Kitchen splashbacks
  • Tiled floors
  • Shower walls

What regrouting looks like in Kilmory

Kilmory is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.

In the older streets around Kilmory Parish Church, older homes can move a little, which is hard on rigid grout and tired sealant.

Kilmory is about 22 miles south-west of Saltcoats, in North Ayrshire. Homes, rented property, offices and hotels in Kilmory can book us for regrouting, old or new, large or small. Every job comes with our one-year guarantee. Our area takes in 53 places across North Ayrshire. You can also see our page for Glasgow, about 47 miles away.

Postcode districts we cover here for regrouting: KA27. Other places close to Kilmory include Drimlabarra (4 miles east), North Feorline (6 miles north-west), Whiting Bay (6 miles north-east), Blackwaterfoot (6 miles north-west) and Birchburn (6 miles north-west). For island and remote addresses, a little more planning is needed, so mention it when you ask for a quote.

Local landmarks in Kilmory

Nearby you’ll also find Kildonan Castle (4.8 miles east). Not far away are Urie Loch.

Map of Kilmory © OpenStreetMap contributors

When to call us in Kilmory

Soap scum and limescale build up on grout and stick to it. The grout beneath can stain and weaken, and at that point, new grout is the better answer.

Look out for these signs:

  • Grout in a colour the owner wants to change
  • Grout that stays dark however much it’s cleaned
  • Shower grout that has worn away
  • Kitchen splashback grout stained by grease

Around Kilmory, as everywhere, regrouting is only as good as the preparation behind it.

What your quote should include

  • What preparation is included
  • Whether they seal over old material or remove it
  • What the quote includes, VAT included or not
  • How long to leave it before use

10 questions to ask before you book

How we quote for regrouting

Your quote is based on your job. We take into account:

  • Whether the work is at height
  • Whether there’s mould to deal with
  • Working hours on commercial sites
  • How many areas need sealing

Doing several joints on one visit is generally more efficient than separate visits. You will get one clear quote for the whole job.

What we need to know

There’s no need for technical detail. Just tell us:

  • The address or postcode of the job
  • Whether it has been sealed before
  • Any access issues, like height or stairs
  • Pictures of the joints, sent by email

For regrouting in Kilmory, send an email to info@mrmastic.co.uk. Tell us what the problem is and where, and you’ll get a clear quote before we start.

How the job changes by surface

Wet rooms

Both the grout and the silicone in a wet room matter. We replace the grout and reseal the edges.

Kitchen splashbacks

The grout by the hob and sink takes most of the mess. We regroute and reseal the worktop joint.

What happens on the day

We work through the job in order: protect, prepare, seal, tidy. For most jobs that takes a few hours, or longer for a fully tiled room. Around Kilmory, distance and access matter more than parking. Tell us how to find the property and how to reach the work.

  1. First, we check for loose or hollow tiles and point out any we find.
  2. The old grout comes out to a consistent depth, without damaging the tiles.
  3. We vacuum the joints and clean out the dust.
  4. We fill the joints with new grout, then clean the tiles.
  5. The corners and edges get new silicone, because grout there would crack.

Before we arrive

  • Mention any sign-in or site rules at work premises
  • Keep children and pets away from the work area
  • Tell us about access, such as stairs, a lift or high-level joints

Getting a quote

There’s no standard price list. Instead, we give you a clear quote for your job. To get started, drop us a line at info@mrmastic.co.uk.

Ask for a quote

Advice

Landlords, agents and businesses in Kilmory

We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.

We regularly work with letting and managing agents. Tell us the address, the job and how access works.

Can I do it myself?

A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.

Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.

Kilmory questions

Is regrouting in Kilmory guaranteed?

All our work, in Kilmory and everywhere else, comes with a 12-month guarantee. We’re also fully insured and ARBOMaster approved.

Do you cover Kilmory for regrouting?

Yes. We work across all of Scotland, and Kilmory is part of that. You can send an email to info@mrmastic.co.uk and tell us what needs doing.

I rent my home. Can I book you?

We are happy to deal with the tenant, landlord or agent. Just make sure your landlord agrees.

How do I get a quote for regrouting in Kilmory?

The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we’ll talk you through it.

How long does regrouting take?

Most jobs take a few hours, or longer for a fully tiled room. We will confirm how long when we quote.

Do the sealants smell?

Some sealants have a smell while they cure. Opening a window helps.

Are you ARBOMaster approved?

Yes. We are approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.

Should corners be grouted or sealed?

Corners get silicone, not grout. They move slightly, and grout there cracks.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job