Oxfordshire · England
Regrouting in Kennington, Oxfordshire
Raking out old, cracked or stained grout and regrouting tiled walls and floors for Kennington, backed by a one-year guarantee. Ask us for a quote.
- Floor grout that has worn and darkened
- Stained grout that cleaning will not shift
- Cracked grout along the bath or tray
Regrouting for homes and businesses in Kennington
Across Kennington, we regrout tiled showers, bathrooms and kitchens. Out comes the old grout, the joints are cleaned and new grout goes in, and we finish by resealing the edges. We work on bathroom wall tiles, wet rooms and shower walls, and people most often call us about floor grout that has worn and darkened and grout stained black or orange that won’t clean.
Even in a smaller place like Kennington, bathrooms and kitchens see heavy daily use. Older or newer, every room gets the same approach: old sealant or grout cut out, joints cleaned and dried, and a fresh finish laid.
We guarantee the work for a year. If something is not right with it in that time, tell us and we’ll put it right.
- Location
- Kennington (OX1, OX14)
- Wider area
- Oxfordshire
- Guarantee
- One year on every job
- Quote
- A clear price before work begins
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
What the job involves on each surface
Kitchen splashbacks
Splashback grout picks up grease and cooking stains. Once it’s stained, new grout is often the only fix.
Wet rooms
Wet room grout and sealant need to be in good order. We renew both.
Bathrooms and kitchens in Kennington
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings. Kennington has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
If you live in an older home near St Swithun's Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. If you let a flat or house near Radley station, a regrout while the flat is empty is quicker than working around a tenant.
Kennington is about 3 miles south of Oxford, in Oxfordshire. We provide regrouting to homeowners, landlords and businesses in Kennington and the surrounding area. 443 places in Oxfordshire are on our list.
Our applicators cover all of the OX1 and OX14 postcode area for regrouting. Streets in the area include Simpsons Way, The Avenue and Liddiard Close, all of which we cover. Nearby, we also carry out regrouting in Sandford-on-Thames (1 mile east), Littlemore (1 mile north-east), Redbridge (1 mile north), Hinksey Hill (1 mile north-west) and Bayworth (1 mile west). Within a short drive, we also cover Oxford (3 miles north), Didcot (7 miles south), Bicester (14 miles north), Abingdon-on-Thames (3 miles south-west), Witney (12 miles north-west) and Carterton (15 miles west).
Near you in Kennington
In Kennington, that means homes and buildings near The Oxford Academy, Emmanuel Christian School and The Tandem pub, among other places. The closest station to Kennington is Radley station, about 1.8 miles south of the centre. Nearby you’ll also find Templars Square (1.9 miles north-east) and Oxford Castle and earlier settlement remains (2.9 miles north). Green spaces nearby include Lashford Lane Fen and Harcourt Hill.
Places near Kennington
What else we do in Kennington
What happens on the day
The work is kept neat and contained to the joints we’re treating. Expect the work to take anything from a few hours to a full day, depending on the area, and we explain the cure time before we leave. In a smaller place like Kennington, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- We check the tiles for any that are hollow or loose.
- The old grout is removed to an even depth.
- The joints are vacuumed clean.
- We regrout the joints and clean the tile faces.
- We finish with silicone in the moving joints.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Keep children and pets away from the work area
- Mention if the joints have been sealed before
Ask for a quote
Asking for a quote is easy: let us know what needs doing and where and its rough size. Photos by email help us understand the job.
Read more
Landlords, agents and businesses in Kennington
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
Common questions in Kennington
Will you come out to Kennington?
Yes, Kennington is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you help a landlord with a rental near Radley station?
Yes, we work for landlords and agents. Just phone 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear quote.
What information do you need?
Just the basics: the address or postcode, what’s wrong and any access issues. After that, simply ring 0345 464 0079 or email us.
Is it OK to seal over old sealant?
No, because it fails. The old sealant always comes out first, so the new sealant bonds properly.
Is it possible to regrout only the shower area?
Yes, that is common. The shower usually fails first, so it’s often the only area that needs doing.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
How do I get a quote for regrouting in Kennington?
We don’t publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
What guarantee comes with the work?
Our 12-month guarantee covers every job, including regrouting.
What we cannot put right
Before you book, it’s worth knowing the limits too:
- Movement in a stud wall or floor
- Tiles that are chipped or split
- A leaking shower valve or waste
Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly before you book.
Where we work in Kennington
- Tiled floors
- Bathroom wall tiles
- Kitchen splashbacks
- Bathroom floors
- Shower walls
- Wet rooms
Common problems we fix in Kennington
A poor original job is a common cause. If it was mixed too wet or not pressed in firmly can wash out within a few years.
These are the problems we’re asked about most:
- Gaps where the shower grout has gone
- Floor grout that has worn and darkened
- Grout in corners that has cracked
- Splashback grout that has darkened
Managing a site like St Swithun's CofE Primary School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Questions to ask before booking
- Which colour the sealant will be
- Is the old sealant removed completely?
- Whether VAT is included
- Which sealant they’ll use, and why
How we quote for regrouting
We don’t publish a price list, because jobs vary so much. What we look at:
- Access and height
- How much old sealant there is and how hard it is to remove
- The size of the job
- Any working-time requirements on site
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
What to tell us for a quote
To make quoting easier, let us know:
- How many joints, rooms or windows are involved
- What’s wrong with the joints now
- Pictures of the joints, sent by email
- Where the job is, and your postcode
We do not publish a price list, because every job is different. Instead, we send you a clear quote for your job. To arrange one, phone 0345 464 0079 or email us.
Should I try it myself first?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.