Oxfordshire · England
Henton Regrouting
Raking out old, cracked or stained grout and regrouting tiled walls and floors for homes and businesses in Henton and across Oxfordshire. Fully insured, ARBOMaster approved and guaranteed for a year.
- Shower grout that has worn away
- Stained grout that cleaning won’t shift
- Kitchen splashback grout stained by grease
How to look after the new joints
How long the joints last depends on use and care. Here’s what we suggest:
- Stick to mild products for cleaning grout
- Get any tile that moves checked promptly
- Keep harsh bleach and acid cleaners off the grout
- Wipe water off the walls when you’re done
Have any tile that moves checked straight away. Movement will crack the new grout and lets water in.
Tiles can come away if failed grout is left. By then, new grout alone is not enough, so it’s worth acting early.
Regrouting in Henton
If you’ve been scrubbing grout that will not come clean, the stain is often in the grout itself. New grout is the fix that lasts and you can pick a different colour while you are at it. We work on shower walls, bathroom floors and wet rooms, and people most often call us about old grout in a dated colour and dirty, worn grout on a tiled floor.
For a small place like Henton, regrouting is planned like any other job: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
We stand behind the work with a 12-month guarantee.
- Where
- Henton (OX39)
- Wider area
- Oxfordshire
- Cover
- A year, on every job
- Price
- A clear price before work begins
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
What we do, step by step
Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, carry out the job and clear up. Most jobs take anything from a few hours to a full day, depending on the area. Somewhere as small as Henton, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by checking the tiles for any that are loose or hollow.
- Old grout is raked out to a consistent depth without chipping the tiles.
- Dust and debris are vacuumed out of every joint.
- We fill the joints with new grout, then clean the tiles.
- The corners and edges get new silicone, because grout there would crack.
Before we arrive
- On commercial sites, let us know about site rules
- Let us know if you’ve seen damp or leaks
- Mention if the joints have been sealed before
Getting a quote
There’s no standard price list, because every job is different. Instead, we give you a clear price for your job. To get started, phone 0345 464 0079 or send us an email.
Related advice
Quotes for regrouting in Henton
Some jobs are bigger than they look, and some smaller. The main factors:
- Any working-time requirements on site
- Whether old sealant or filler has to be cut out
- The number and length of the joints
- Any mould that needs treating
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all make a difference, and we will explain the quote if you ask.
Asking for a quote
Before you ask for a quote, have a think about:
- The type of property
- The problem you’ve noticed
- Roughly how big the job is
- If someone has resealed it before
Want a quote for regrouting? Please phone 0345 464 0079 or send us an email and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Why deal with it now?
With regrouting, your tiles stay where they are. Retiling is a much bigger job: stripping, making good, new tiles and new grout, and the room is out of use for longer. If the tiles are sound, regrouting is the simpler fix. Around Henton, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Why Henton clients choose us
- Old sealant always removed completely
- Neat joints and a tidy finish
- Every job guaranteed for a year
- Homes, businesses and hotels
Take a look at what affects the cost and customer reviews.
How the job changes by surface
Shower walls
Shower walls get wet every day, so grout there works hardest. It generally fails first.
Kitchen splashbacks
Grout behind the hob and sink works hard. We regroute and reseal the worktop joint.
Places near Henton
Other services in Henton
Elsewhere in Oxfordshire
Regrouting in all 443 places in Oxfordshire
Our services in Oxfordshire
All areas
About regrouting
Regrouting in Henton: local notes
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Homes close to Church of the Holy Trinity include some older properties, and walls and floors in older homes can move, and sealant and grout show it first.
Henton is about 4 miles south-east of Thame, in Oxfordshire. Anywhere in OX39, we can carry out regrouting at your property. Henton is one of 443 places in Oxfordshire where we work. Oxford is on our list too, about 15 miles from Henton.
All of OX39 is within our area for regrouting. Regrouting is available to properties on Manor Farm Way and New Close Farm Road. Nearby, we also carry out regrouting in Forty Green (1 mile north), Skittle Green (1 mile east), Holly Green (1 mile north-east), Pitch Green (1 mile east) and Bledlow (1 mile east). Larger places within reach include Oxford (15 miles west), Thame (4 miles north-west), Henley-on-Thames (13 miles south), Benson (11 miles south-west), Headington Quarry (13 miles west) and Wallingford (13 miles south-west).
Near you in Henton
In Henton, that means homes and buildings near The Peacock Country Inn and the streets around them. The nearest railway station is Princes Risborough station, roughly 2.2 miles east of the centre. A little further out are Great Kimble Dial Hill (4.3 miles north-east) and Thame Community Hospital (3.6 miles north-west). Not far away are Beacon Hill and Oakley Hill nature reserve.
Henton: your questions answered
Is Henton in your area for regrouting?
Yes. We work across London and the South East, and Henton is part of that. You can phone 0345 464 0079 or send us an email and tell us what needs doing, and we’ll give you a clear quote.
Is Henton within the area you cover?
Yes, Henton is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Can you change the grout colour?
Yes, regrouting is the time to do it. Mention the colour you have in mind when you call 0345 464 0079 or send us an email.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned.
Do you work for letting agents?
Yes, regularly. Several properties can go on one quote, and between tenancies is a good time for the work.
Do you guarantee regrouting?
You get our 12-month guarantee on every job, and we are fully insured.
Do you do commercial work?
Yes. We’ve worked for hotels, offices and other businesses and we are fully insured.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
When to call us in Henton
Grout that was put in corners cracks because those joints flex. They need flexible sealant, and when they are not, water gets in.
Keep an eye out for any of the following:
- Floor grout that will not come clean
- Old grout in a dated colour
- Greasy, stained grout behind the hob
- Discoloured grout on otherwise sound tiles
If you let a flat or house near Princes Risborough station, a regrout while the flat is empty is quicker than working around a tenant.
Questions to ask before you book
- Whether they seal over old material or remove it
- What product goes in the joint
- What preparation is included
- What the cure time is
Should I try it myself first?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.