East Sussex · England
Regrouting in Gun Hill, East Sussex
Raking out old, cracked or stained grout and regrouting tiled walls and floors in Gun Hill, with a one-year guarantee on every job. Call for a quick quote.
- Old grout in a dated colour
- Corners filled with grout instead of silicone
- Kitchen splashback grout stained by grease
Surface by surface
Bathroom floors
Floor grout takes foot traffic as well as water. It gets worn and dirty.
Kitchen splashbacks
Splashback grout picks up grease and cooking stains. Once it’s stained, new grout is often the only fix.
About our regrouting in Gun Hill
Across Gun Hill, we regrout tiled showers, bathrooms and kitchens. The old grout is raked out, the joints cleaned and new grout laid, and we finish by resealing the edges. Common call-outs are for cracked or crumbling grout lines and corners filled with grout instead of silicone, on tiled floors, shower walls and kitchen splashbacks.
For a small place like Gun Hill, regrouting is planned like any other job: it just means planning the journey and access beforehand. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
You are covered for a year from the day we finish. If there’s a problem with it, please call 0345 464 0079 or send us an email.
- Place
- Gun Hill (TN21)
- Wider area
- East Sussex
- Cover
- One year on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Landlords, agents and businesses in Gun Hill
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.
What happens if it’s left?
Regrouting will not help where tiles have come away. We point that out first so you know what’s involved. Where the tiles are sound, regrouting is far less disruptive than retiling. Around Gun Hill, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
What it costs depends on the amount of work, how much old material has to come out and access to the work. We give a clear quote before any work starts.
Why book with us
- 20+ years of sealant experience
- ARBOMaster approved applicator
- Arbo and Everbuild products
- 4.9 on Google from 180+ five-star reviews
Read our cost guide and our reviews.
Regrouting in Gun Hill: local notes
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For jobs in and around Gun Hill, choosing the right material for each joint is as important as a tidy finish.
Gun Hill is about 3 miles north-west of Hailsham, in East Sussex. We carry out regrouting for homes and businesses in Gun Hill and the surrounding area. Our East Sussex coverage runs to 289 places, Gun Hill among them. Our Brighton page covers work nearby.
Our applicators cover all of the TN21 postcode area for regrouting and the streets around it. We also cover Hale Green (1 mile west), Muddles Green (1 mile south-west), Burlow (1 mile north-east), Horam (2 miles north-east) and Lions Green (2 miles north). Further out, we also cover Eastbourne (9 miles south), Hastings (15 miles east), Bexhill-on-Sea (11 miles east), Seaford (10 miles south-west), Lewes (10 miles west) and Hailsham (3 miles south-east).
Landmarks near Gun Hill
Nearby you’ll also find Hellingly Hospital Railway (2.1 miles south-east) and Sussex Farm Museum (1.9 miles north-east). Open spaces near Gun Hill include Selwyns Wood.
Nearby places to Gun Hill
More services for Gun Hill
Do you need regrouting in Gun Hill?
Strong cleaning products and hard scrubbing slowly erode grout. Bleach and acidic limescale removers can attack it with repeated use, until the joints are rough and low.
Any of these means the joints need attention:
- Grout in corners that has cracked
- Floor grout that has worn and darkened
- Grout washed out of a shower
- Kitchen splashback grout stained by grease
In and around Gun Hill, as anywhere, good regrouting starts with a clean, dry, properly prepared joint.
Before you book anyone
- When the joint can take water or movement
- Whether VAT is included
- What product goes in the joint
- Whether they’re fully insured
Your questions about regrouting in Gun Hill
Can you do regrouting in Gun Hill?
Yes, Gun Hill is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or email us with a few details of the job, and we’ll send you a clear quote.
Is regrouting in Gun Hill guaranteed?
Every job comes with our one-year guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Do you have insurance?
Yes, we’re fully insured for every job we do.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often happy for the work to be arranged.
Should I try DIY first?
That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done.
Are you ARBOMaster approved?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Do you remove the old sealant?
Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.
When it is not the sealant
We’d rather tell you now than do work that won’t last, so here’s what sealant can’t put right:
- Leaks from pipes, valves or wastes (a plumber’s job)
- A leaking wet room membrane
- Tiles that are loose or hollow behind
Not sure which it is? You can phone 0345 464 0079 or email us and we will tell you honestly.
Joints and surfaces we work on
- Wet rooms
- Bathroom wall tiles
- Kitchen splashbacks
- Bathroom floors
- Shower walls
- Tiled floors
How the visit works
There’s no need to move everything out, just the space around the work. We protect the rest, and the job takes a few hours, or longer for a fully tiled room in most cases. In a small place like Gun Hill, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We agree the area to be regrouted and point out any loose tiles.
- We remove the old grout carefully.
- Dust is cleared from every joint.
- We grout the joints and wipe the tiles clean.
- We renew the silicone at the corners and edges.
Before we arrive
- Tell us if parking is tricky
- Keep children and pets away from the work area
- Tell us about access, such as stairs, a lift or high-level joints
How to get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Advice
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.