Surrey · England

Regrouting in Grayshott

Our applicators work in Grayshott on raking out old, cracked or stained grout and regrouting tiled walls and floors. Old material cut out, joints cleaned and sealed neatly.

  • Shower grout that has worn away
  • Dirty, worn grout on a tiled floor
  • Cracked or crumbling grout lines

Regrouting for Grayshott homes and businesses

Regrouting in Grayshott, done properly

When grout stays dark however much you clean it, the discolouration has normally soaked into the grout. New grout is the fix that lasts, and it’s a chance to change the colour too. Typical jobs include discoloured grout on otherwise sound tiles and floor grout that won’t come clean, on kitchen splashbacks, tiled floors and shower walls.

Around Grayshott, you will mostly find houses and bungalows, from older cottages to newer builds. Sealant and grout wear out here just as they do in a big town.

All our work comes with a 12-month guarantee, wherever you are in Surrey.

Where
Grayshott (GU26)
Wider area
Surrey
Guarantee
12 months on all our work
Price
A clear price before work begins
Telephone
0345 464 0079
Last updated
26 October 2026
Mr Mastic applicator smiling as he applies silicone to the corner of a bath

How we quote for regrouting

There’s no set price list, because no two jobs are the same. The quote depends on:

  • Whether old sealant or filler has to be cut out
  • The number and length of the joints
  • Any mould that needs treating
  • Working hours on commercial sites

No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we’ll explain the quote if you ask.

Helping us quote

You do not need to know the technical terms. It helps if you can tell us:

  • If someone has resealed it before
  • What’s wrong with the joints now
  • How many joints, rooms or windows are involved
  • The address or postcode of the job

It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. When it suits you, ring 0345 464 0079 or send us an email.

Leave it or put it right?

Regrouting keeps the tiles you already have. Retiling means stripping the walls, making good and choosing new tiles, and the room is out of use for longer. If the tiles are sound, regrouting is the simpler fix. In a smaller place like Grayshott, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.

The cost reflects the work involved, not a rough estimate. That is why we ask about the job first.

Why us?

  • Rated 4.9 stars on Google
  • Over 20 years’ experience
  • Any old sealant cut out fully, not covered over
  • Every job guaranteed for a year

Read what affects the cost or our reviews.

What we do, step by step

A visit follows a simple pattern: we look at the joints together, mask and protect the surrounding surfaces, carry out the job and clear up. It generally takes a few hours for a shower enclosure, longer for a whole room. In a smaller place like Grayshott, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.

  1. Every tile area is checked for hollow or loose tiles first.
  2. We rake out the grout evenly, protecting the tile edges.
  3. We vacuum the joints so the new grout bonds.
  4. New grout is pressed into the joints and the tiles are cleaned.
  5. We finish with silicone in the moving joints.

How to prepare

  • Tell us about access, such as stairs, a lift or high-level joints
  • Mention any sign-in or site rules at work premises
  • Keep children and pets away from the work area

Ask for a quote

For a quote, call 0345 464 0079 or email us with the location and a short description of the problem. We’ll give you a clear quote before any work starts.

Get a quick quote

Advice

Should I try it myself first?

Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.

If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.

What regrouting looks like in Grayshott

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

If you let a flat or house near Haslemere station, stained grout drags a rental down, and regrouting between lets puts that right. In the older streets around Church of St Luke, timber floors under older bathrooms flex, so joints need a sealant that moves with them.

Grayshott is about 7 miles south of Farnham, in Surrey. Homes, rented property, offices and hotels in Grayshott can book us for regrouting. The work is guaranteed for a year. Grayshott is one of 395 towns and villages in Surrey we cover. We also work in Crawley, around 24 miles away.

All of GU26 is within our area for regrouting. That includes homes and businesses on Church Lane, Vale Wood Lane and Avenue Road. Neighbouring places we cover for regrouting include Hindhead (1 mile east), Nutcombe (1 mile south-east), Beacon Hill (1 mile north), Whitmoor Vale (1 mile north-west) and Green Cross (2 miles north). Larger places within reach include Guildford (12 miles north-east), Camberley (15 miles north), Farnham (7 miles north), Frimley (14 miles north), Cranleigh (12 miles east) and Ash (9 miles north).

Local landmarks in Grayshott

Around Grayshott, our work takes us to homes and buildings near The Fox & Pelican pub, Woolmer Hill School and St Edmund's School, among other places. Grayshott’s nearest station is Haslemere station, about 2.2 miles south-east of the centre. Nearby you’ll also find Haslemere and District Hospital (2.4 miles south-east). Green spaces nearby include Lynchmere Commons and Gibbet Hill.

Map of Grayshott © OpenStreetMap contributors

When to call us in Grayshott

Most grout is porous, so it soaks up water, soap and dirt. Given time, it discolours and begins to break down, especially in a shower that’s used every day.

If you can see any of these, it’s time to have the joints looked at:

  • Grout that makes sound tiles look old
  • Floor grout that won’t come clean
  • Stained grout that cleaning will not shift
  • A grout colour that no longer suits the room

Schools such as Grayshott Church of England Controlled Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.

Questions to ask before booking

  • Whether they’re fully insured
  • When the joint can take water or movement
  • Which sealant they’ll use, and why
  • Is VAT in the price?

How to choose a mastic man

Keeping the joints in good condition

Simple care keeps the joints in good condition. We recommend:

  • Give the walls a quick rinse after use
  • Keep harsh bleach and acid cleaners off the grout
  • Clean grout with a mild bathroom cleaner
  • Look at the sealant in the corners now and then

We’ll tell you when the area can be used again. Please follow it, and go gently on the grout at first.

Grout that is washing out of a shower shouldn’t be left. Every shower pushes more water into the gaps and it can end up in the wall or the ceiling below.

For landlords and businesses

Hotels need rooms back in use, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.

We work for landlords and agents as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order.

Common questions in Grayshott

Is Grayshott in your area for regrouting?

Yes, Grayshott is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or drop us an email and let us know what needs doing.

Will you come out to Grayshott?

Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

Does someone need to be in?

We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.

Is it worth trying it myself?

You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.

Can you do several jobs on one visit?

Of course. Combining jobs makes good use of the visit, so mention them when you ask for a quote.

How do I get a quote for regrouting in Grayshott?

The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote.

Is it messy?

We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.

Are you fully insured?

Yes, we’re fully insured.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job