Kent · England

Regrouting in Gold Street

Raking out old, cracked or stained grout and regrouting tiled walls and floors in Gold Street, with a one-year guarantee on every job. Call for a quick quote.

  • Good tiles let down by tired grout
  • Grout that’s cracking and breaking up
  • Floor grout that has worn and darkened

Trusted regrouting in Gold Street

Why act early in Gold Street

Cracked grout lets water behind the tiles. Left alone, that water can loosen tiles or damage the wall, and then you’re looking at retiling. Sorting it early keeps the job simple. In a small place like Gold Street, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.

There are no prices on our website, because each job is priced on what it involves. For a quick quote, please ring 0345 464 0079 or send us an email.

Why us?

  • Neat joints and a tidy finish
  • A 12-month guarantee on all work
  • Approved under the ARBOMaster scheme
  • We never seal over old sealant

See our cost guide or customer reviews.

How we handle regrouting in Gold Street

We check the tiles before any grout comes out. Loose or hollow tiles are pointed out first, since new grout can’t fix a problem underneath. With sound tiles, regrouting is a tidy, lasting improvement. We are often asked to deal with stained grout that cleaning won’t shift and gaps where the shower grout has gone, across shower walls, bathroom floors and tiled floors.

For a small place like Gold Street, regrouting is planned like any other job: it just means planning the journey and access beforehand. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.

Whatever the size of the job, it’s backed by our one-year guarantee.

Place
Gold Street (DA12)
Wider area
Kent
Cover
12 months on all our work
Quotes
Quoted before any work starts
Phone
0345 464 0079
Page updated
26 October 2026
Mr Mastic applicator kneeling beside a white bath, sealing the joint where the bath meets beige wall tiles

Regrouting in Gold Street: local notes

Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.

If you live in an older home near St Mary's Room, walls and floors in older homes can move, and sealant and grout show it first. If you look after a building such as Cobham Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.

Gold Street is about 3 miles south of Gravesend, in Kent. Every kind of property in Gold Street is covered for regrouting, old or new, large or small. The work is guaranteed for a year. 922 places in Kent are on our list, from the larger towns to small villages. You can also see our page for London, about 22 miles away.

Every address in DA12 is covered for regrouting, from the main roads to the quietest streets. We also cover the places around Gold Street: Sole Street (1 mile west), Round Street (1 mile north-west), Henley Street (1 mile south-east), Luddesdown (1 mile south-east) and Meopham (1 mile south-west). Further out, we also cover Maidstone (10 miles south-east), Sittingbourne (15 miles east), Dartford (8 miles north-west), Sevenoaks (11 miles south-west), Gravesend (3 miles north) and Tonbridge (14 miles south).

Around Gold Street

Typical jobs here are in homes near The Railway Inn, Camer Park Country Park and Meopham School and the streets around them. There’s a railway station in Gold Street itself: Sole Street station. Other landmarks nearby include Gravesham Community Hospital (4 miles north) and Gravesham Museum (3.9 miles north). The countryside around Gold Street includes Gad's Hill and Ranscombe Farm.

Map of Gold Street © OpenStreetMap contributors

Quotes for regrouting in Gold Street

We do not publish a price list, because no two jobs are the same. The quote depends on:

  • The number of rooms or windows
  • How easy the joints are to reach
  • How much there is to do
  • Which sealant suits the joint

Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll go through it with you.

Helping us quote

There’s no need for technical detail. It helps if you can tell us:

  • The problem you’ve noticed
  • If someone has resealed it before
  • How we’d reach the joints
  • The address or postcode of the job

Every job is quoted individually, so start by telling us what you need. Just phone 0345 464 0079 or send us an email with the details, and photos are welcome.

Common questions in Gold Street

Is Gold Street in your area for regrouting?

Yes. We work across London and the South East, and Gold Street is part of that. Just call 0345 464 0079 or drop us an email with a few details of the job.

Will you come out to Gold Street?

Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.

How long will you be here?

Most jobs take a few hours for a shower enclosure, longer for a whole room. Your quote will say how long we expect yours to take.

Do I have to be there?

We need access to the joints, so we’ll agree that with you when we book. Indoors, that usually means someone at home.

What do you need from me for a quote?

Just the basics: where it is, what you’ve noticed and how we reach it. Then ring 0345 464 0079 or send us an email.

Can you seal over the old sealant?

No, because it fails. The old sealant always comes out first, so the new joint bonds to clean surfaces.

Will regrouting fix loose tiles?

Loose tiles need refixing before regrouting. We will show you which ones at the start.

Can you work on commercial sites?

Yes. Hotels, offices and other businesses use us and we’re fully insured.

Landlords, agents and businesses in Gold Street

From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.

For anyone letting property in or around Gold Street, jobs at different addresses can go on one quote. Send us the addresses and the work at each, and pictures by email help.

How the job changes by surface

Shower walls

Shower walls are the most common area we regrout. Gaps here let water get behind the tiling.

Corners and edges

We reseal edges at the same time as regrouting, so the whole area is finished together.

Common problems we fix in Gold Street

Poor ventilation keeps grout damp, and damp grout is where mould grows. When black spots keep returning, the mould has usually got into the grout.

These are the problems we’re asked about most:

  • Floor grout that has worn and darkened
  • Corners filled with grout instead of silicone
  • Good tiles let down by tired grout
  • Grout in a colour the owner wants to change

For landlords with property near Sole Street station, stained grout drags a rental down, and regrouting between lets puts that right.

What to look for in a quote

  • Is VAT in the price?
  • Whether they’re fully insured
  • How long the guarantee is
  • Which colour the sealant will be

How to choose a mastic man

How to look after the new joints

So the new joints stay in good condition:

  • Clean with a soft brush, not anything metal
  • Open a window or run the fan to clear steam
  • Don’t use strong acidic cleaners on grout
  • Check the corner silicone every few months

Leave the area unused for as long as we advise, so it cures fully. From then on, a quick rinse after showering helps and let the room air.

Leaving failed grout can mean tiles come loose. By then, new grout alone isn’t enough, so it’s worth acting early.

How it works

All our tools and materials come with us in the van, so there’s nothing for you to buy. Once we’ve agreed what’s being done, the area is protected and the work begins. It normally takes a few hours, or longer for a fully tiled room. For a village or hamlet like Gold Street, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. We check the tiles for any that are hollow or loose.
  2. The old grout is removed to an even depth.
  3. The joints are vacuumed clean.
  4. We regrout the joints and clean the tile faces.
  5. Silicone goes into the corners and along the edges.

Preparing for the visit

  • Tell us if parking is tricky
  • Where the joints are inside, avoid wetting them before we arrive
  • Keep pets and children clear of the area while we work

Get a quote

A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.

Ask for a quote

Advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job