Hampshire · England
Regrouting in Easton, Hampshire
Raking out old, cracked or stained grout and regrouting tiled walls and floors in Easton, with a one-year guarantee on every job. Call for a quick quote.
- Greasy, stained grout behind the hob
- Crumbling grout between the tiles
- Good tiles let down by tired grout
Regrouting in Easton
A bathroom with good tiles can still look worn if the grout has gone. With regrouting, the tiles stay and only the grout is renewed, so nothing is ripped out. Common call-outs are for good tiles let down by tired grout and dirty, worn grout on a tiled floor, on bathroom floors, kitchen splashbacks and bathroom wall tiles.
Around Easton, it’s houses and cottages rather than flats. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
You’re covered for a year from the day we finish. If there’s a problem with it, please call 0345 464 0079 or email us.
- Location
- Easton (SO21)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quote
- A clear price before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Work for landlords, hotels and businesses
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.
Towns and villages near Easton
Also in Easton
How to look after the new joints
Simple care keeps the joints in good condition. Our advice:
- Wipe or squeegee the shower walls
- Keep the fan on after showering
- Get any tile that moves checked promptly
- Clean grout with a mild bathroom cleaner
Keep an eye on the silicone in the corners. It’s the part that moves, so the sealant there will need renewing in time, long before the grout does.
If grout in the shower is washing out, act soon. Every shower pushes more water into the gaps and it can end up in the wall or the ceiling below.
When to call us in Easton
Movement behind the tiles cracks grout. Loose tiles, bouncy floors and timber walls can all do it, so we check the tiles before any work starts.
Look out for any of the following:
- Grout that is cracking and breaking up
- Old grout in a dated colour
- Grout that stays dark however much it’s cleaned
- Kitchen splashback grout stained by grease
If you look after a building such as Peter Symonds College, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Before booking anyone
- How long to leave it before use
- How the surfaces are prepared before sealing
- Who turns up on the day
- What happens if the job turns out different
Should I try it myself first?
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
How it works
Most of a good job is in the preparation, and we do not rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes anything from a few hours to a full day, depending on the area. Somewhere like Easton needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- Every tile area is checked for hollow or loose tiles first.
- The old grout is removed to an even depth.
- We vacuum the joints so the new grout bonds.
- New grout is pressed into the joints and the tiles are cleaned.
- Silicone goes into the corners and along the edges.
Before we arrive
- Move anything stored near the joints
- Mention if the joints have been sealed before
- Let us know about stairs, lifts or work at height
Ask for a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we will talk you through what we’d do. Whenever you’re ready, call 0345 464 0079 or send us an email.
Related advice
Easton homes and their sealant
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
For landlords with property near Winchester station, stained grout drags a rental down, and regrouting between lets puts that right. In the older streets around Church of St Mary, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Easton is about 3 miles north-east of Winchester, in Hampshire. Easton gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 683 places across Hampshire, from the larger towns to small villages. There’s also a page for Southampton, roughly 13 miles from Easton.
Work in SO21 is quoted and booked the same way as anywhere else. You will find streets such as Easton Lane, Malthouse Close and Chapel Lane. Neighbouring places we cover for regrouting include Abbots Worthy (1 mile north-west), Martyr Worthy (1 mile north-east), Kings Worthy (1 mile west), Itchen Abbas (2 miles east) and Winnall (2 miles south-west). We also work in nearby towns such as Basingstoke (14 miles north-east), Winchester (3 miles south-west), Eastleigh (9 miles south), Andover (13 miles north-west), Totton (15 miles south-west) and Chandler's Ford (9 miles south-west).
Near you in Easton
Around Easton, our work takes us to homes and buildings near The Cricketers Inn, among other places. Easton’s nearest station is Winchester station, about 2.4 miles south-west of the centre. Nearby you’ll also find Wolvesey Castle (2.4 miles south-west) and St John's Rooms And Chapel (2.3 miles south-west). For a walk, there’s Twyford Down and Winnall Moors.
What happens if it’s left?
If tiles are loose, regrouting alone is not the answer. We will tell you before work begins so you know what’s involved. Where the tiles are sound, regrouting is far less disruptive than retiling. Older cottages and farmhouses around Easton can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
We do not show prices on the website, because the cost depends so much on the job itself. For a quick quote, please call 0345 464 0079 or email us and we will talk you through it.
Why Easton clients choose us
- We are fully insured
- Over 20 years’ experience
- 12-month guarantee on every job
- Neat joints and a tidy finish
Take a look at what affects the cost and what customers say.
Questions from Easton
Will you come out to Easton?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
I let a flat near Winchester station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Do you reseal at the same time?
Most of the time, yes. Grout and sealant do different jobs, so both are renewed and it’s all in the quote.
Will there be a smell?
Some sealants have a smell while they cure, which fades as it sets. Opening a window helps.
What sealant do you use?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We will tell you what we’re using and why.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Will regrouting fix loose tiles?
Loose or hollow tiles are a sign of a problem behind them. Regrouting alone isn’t the answer and we will say so before going ahead.
How soon can the shower be used after regrouting?
Before we leave, we’ll tell you how long to wait. The grout and sealant both need to cure before they get wet.
What affects the cost of regrouting
You will get a clear quote before we start. It takes into account:
- Whether old sealant or filler has to be cut out
- How easy the joints are to reach
- Working hours on commercial sites
- The type of sealant required
What you pay reflects the work, not a rough estimate. That’s why we ask a few questions first.
Helping us quote
When you call or email, these details help:
- Where the property is
- Whether it has been sealed before
- A few photos by email, if you can
- Whether it’s a home or a business
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job.