Hampshire · England
Regrouting in Buckskin
Regrouting across Buckskin and nearby, with every bit of old sealant taken out first and a one-year guarantee.
- Grout that is cracking and breaking up
- Dirty, worn grout on a tiled floor
- Grout in corners that has cracked
About our regrouting in Buckskin
A bathroom with good tiles can still look worn if the grout has gone. With regrouting, the tiles stay and only the grout is renewed, so nothing is ripped out. If you are dealing with kitchen splashback grout stained by grease and cracked grout along the bath or tray, we can put it right.
Homes around Buckskin range from older cottages to more recent houses. In older homes, walls and floors can move a little more, so the right flexible sealant matters.
All of our work is guaranteed for twelve months, in Buckskin and everywhere else we cover.
- Where
- Buckskin (RG22, RG23)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quote
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Common problems we fix in Buckskin
Harsh cleaners and scrubbing wear grout away. Some bleaches and acid descalers break grout down over time, leaving the joints sunken and rough.
The most common problems we see are:
- Cracked or crumbling grout lines
- Kitchen splashback grout stained by grease
- Gaps where the shower grout has gone
- Grout that makes sound tiles look old
If you let a flat or house near Basingstoke station, clean grout and fresh sealant between tenancies make a bathroom look cared for again.
What to look for in a quote
- What the quote includes, VAT included or not
- Who turns up on the day
- How the surfaces are prepared before sealing
- Which colour the sealant will be
FAQs for Buckskin
Is Buckskin in your area for regrouting?
Yes, Buckskin is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or drop us an email with a few details of the job.
Is Buckskin within the area you cover?
Yes, Buckskin is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Where is Mr Mastic based?
We’re based in Crawley, and we work across South East England, London and Scotland.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We’ll tell you what we’re using and why.
How much does regrouting cost in Buckskin?
The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote and we will talk you through it.
Will regrouting fix loose tiles?
Loose or hollow tiles are a sign of a problem behind them. Grout on its own will not fix that and we’ll say so before going ahead.
Does someone need to be in?
Access is agreed with you when the job is booked. Indoors, that normally means someone at home.
Are you insured?
Yes. Full insurance covers our work.
What the job involves on each surface
Bathroom wall tiles
Walls outside the shower get less water but grout there still discolours. New grout freshens them up.
Kitchen splashbacks
The grout by the hob and sink takes most of the mess. We renew the grout and the worktop sealant.
Buckskin homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
In the older streets around Church of St Thomas A Becket, walls and floors in older homes can move, and sealant and grout show it first. Managing a site like Chiltern Primary School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Buckskin is about 1 mile west of Basingstoke, in Hampshire. Across the RG22 area, we cover regrouting for homes and businesses. 683 places in Hampshire are on our list, from the larger towns to small villages. There’s also a page for Reading, roughly 15 miles from Buckskin.
Here we cover the RG22 and RG23 postcode area for regrouting. That includes homes and businesses on Warham Road, Church Lane and Wayside Road and the roads around them. If you are just outside Buckskin, we cover Worting (1 mile north-west), Winklebury (1 mile north-east), South Ham (1 mile east), Kempshott (1 mile south) and Brighton Hill (1 mile south-east). We also work in nearby towns such as Fleet (13 miles east), Alton (10 miles south-east), Yateley (14 miles north-east), Tadley (7 miles north), Bordon (15 miles south-east) and Hook (8 miles east).
What’s near Buckskin
Around Buckskin, our work takes us to homes and buildings near The White Hart Inn, Bishop Challoner Catholic Secondary School and Coppice Spring School, among other places. For rail, the closest station is Basingstoke station, roughly 2 miles east. Nearby you’ll also find Park Prewett Hospital (1.6 miles north) and The Malls (2 miles east). Not far away are Farleigh Hill and Daneshill Park Woods.
What we cannot put right
Some problems need a builder, plumber or other trade rather than us:
- A floor or wall that keeps moving
- Tiles that have come away from the wall
- Failed tanking or waterproofing under the tiles
If you’re not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer.
Joints and surfaces we work on
- Tiled floors
- Kitchen splashbacks
- Bathroom wall tiles
- Shower walls
- Wet rooms
- Bathroom floors
Quotes for regrouting in Buckskin
Jobs vary more than people expect. The main factors:
- Working hours on commercial sites
- The number of rooms or windows
- The old material and how stubborn it is
- Whether the work is at height
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
Helping us quote
What to tell us when you ask for a quote:
- The rough size of the job
- If it’s domestic, commercial or a hotel
- Where the job is, and your postcode
- Pictures of the joints, sent by email
We quote each job on its own, so the first step is telling us about yours. Just phone 0345 464 0079 or drop us an email with the details, and photos are welcome.
What happens if it’s left?
Cleaning products may brighten grout for a time, but mould that has got into grout usually comes back. Replacing the grout and resealing the edges is a lasting fix. In a smaller place like Buckskin, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, plus any working-time requirements on site. Call for a quick quote and we will go through it with you.
Why book with us
- Old sealant always removed completely
- ARBOMaster approved applicator
- Arbo and Everbuild products
- One-year guarantee on every job
Read how sealant jobs are priced or our reviews.
How it works
The work is kept neat and contained to the joints we’re treating, so you can get on with your day. The job usually takes a few hours, or longer for a fully tiled room, and we tell you how long to leave it before we go. In a smaller place like Buckskin, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- We agree the area to be regrouted and point out any loose tiles.
- We remove the old grout carefully.
- The joints are cleaned out and vacuumed.
- The new grout goes in, then the tile faces are cleaned.
- Internal corners and edges are resealed.
Getting ready for the visit
- Let us know about stairs, lifts or work at height
- Clear the area around the work
- Tell us about any water getting in
Getting a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Related advice
Can I do it myself?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.