West Sussex · England
Bolney Regrouting
Raking out old, cracked or stained grout and regrouting tiled walls and floors for homes and businesses in Bolney and across West Sussex. Fully insured, ARBOMaster approved and guaranteed for a year.
- Kitchen splashback grout stained by grease
- Grout that is cracking and breaking up
- Good tiles let down by tired grout
How we handle regrouting in Bolney
A grout colour change can freshen a room without retiling. Light grout can go darker to hide marks, or the other way round. Tell us what you have in mind when you ask for a quote. If you are dealing with discoloured grout on otherwise sound tiles and splashback grout that has darkened, we can help, whatever the surface.
Being in a small place like Bolney makes no difference to the job itself: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
You are covered for a year from the day we finish. If there’s a problem with it, please ring 0345 464 0079 or drop us an email.
- Place
- Bolney (RH17)
- Region
- West Sussex
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What the job involves on each surface
Bathroom wall tiles
Splash areas around basins and baths stain first. We can do part of a wall or all of it.
Corners and edges
Corners flex as the building moves, so we seal them rather than grout them.
What regrouting looks like in Bolney
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
In the older streets around St Mary Magdalene's Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Letting a property close to Wivelsfield station? Then clean grout and fresh sealant between tenancies make a bathroom look cared for again. Schools such as Bolney CofE Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Bolney is about 4 miles north-west of Burgess Hill, in West Sussex. If you need regrouting in Bolney, please call 0345 464 0079 or email us for a quick quote. We are based in Crawley and cover West Sussex. Across West Sussex, we cover 371 places, and Bolney is one of them. You can also see our page for Crawley, roughly 8 miles from Bolney.
Here we cover the RH17 postcode area for regrouting. Whether your property is on The Street, Cherry Lane and Top Street or anywhere close by, we can help. We also cover the places around Bolney: Crosspost (1 mile south-west), Twineham Green (2 miles south), Twineham (2 miles south), Wineham (3 miles south-west) and Kent Street (3 miles south-west). Larger places within reach include Crawley (8 miles north), Horsham (7 miles north-west), Worthing (15 miles south-west), Haywards Heath (5 miles east), Burgess Hill (4 miles south-east) and East Grinstead (12 miles north-east).
Around Bolney
The nearest railway station is Wivelsfield station, roughly 4.1 miles south-east. Nearby you’ll also find The Dene Hospital (2.6 miles south-east) and Cuckfield Museum (2.6 miles east). For a walk, there’s Blunts Wood and Paiges Meadow.
Landlords, agents and businesses in Bolney
Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll give you a quote.
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can be quoted together.
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Run the extractor fan during and after a shower
- Give the walls a quick rinse after use
- Clean with a soft brush, not anything metal
- Have loose tiles looked at early
Use a gentle cleaner on the grout and a soft brush. Keep harsh bleach and acid limescale removers away from it, as they can break grout down.
Stains that will not clean are a sign the grout is breaking down. At this point it’s a simple regrout while the tiles are still sound.
What affects the quote in Bolney
The quote reflects the job in front of us. We look at:
- When we can work, for business premises
- The type of sealant required
- Whether old sealant or filler has to be cut out
- The number and length of the joints
Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you are unsure, ring 0345 464 0079 or send us an email and we’ll give you an honest view and a quote.
What to tell us for a quote
There’s no need for technical detail. It helps if you can tell us:
- Where the job is, and your postcode
- Pictures of the joints, sent by email
- What the problem is, such as mould, gaps, leaks or cracking
- The rough size of the job
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
How the visit works
When we get to you, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes a few hours for a shower enclosure, longer for a whole room. Somewhere like Bolney needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Every tile area is checked for hollow or loose tiles first.
- We rake out the grout evenly, protecting the tile edges.
- We vacuum the joints so the new grout bonds.
- New grout is pressed into the joints and the tiles are cleaned.
- We finish with silicone in the moving joints.
How to prepare
- Keep children and pets away from the work area
- For indoor joints, keep the area dry beforehand if you can
- For business premises, tell us about site rules or sign-in
How to get a quote
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we will explain what’s involved before giving you a price.
Advice
Places near Bolney
More services for Bolney
Bolney questions
Will you come out to Bolney?
Yes, Bolney is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Is Bolney in your area for regrouting?
Yes. Our work covers London and the South East, and Bolney is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job.
What guarantee comes with the work?
Our 12-month guarantee applies to all our work, and we are fully insured.
Is it OK to seal over old sealant?
No. We remove every bit of old sealant first, so the new joint bonds to clean surfaces.
How much does regrouting cost in Bolney?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
Can you work on commercial sites?
Yes. Hotels, offices and other businesses use us and we are fully insured.
What should I tell you?
A short description and the location, with photos by email if possible. We’ll ask anything else we need to know.
Do the sealants smell?
That depends on the sealant. Some smell for a while, some hardly at all.
Why it’s worth doing now in Bolney
Colouring the surface of old grout is a quick cosmetic fix. They won’t fill gaps or keep water out, and stains can show through again. Raking out and regrouting replaces the grout itself. Older cottages and farmhouses around Bolney can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Doing several joints on one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. We’ll give you a clear price for the lot.
Why book with us
- Any old sealant cut out fully, not covered over
- We leave the area clean and tidy
- We’re fully insured
- Trusted Arbo and Everbuild sealants
Read our cost guide or what customers say.
DIY versus a professional finish
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.