Hampshire · England
Regrouting in Allbrook, Hampshire
Problem with your tiled areas in Allbrook? We remove the old material, prepare the joints and seal them properly.
- Grout washed out of a shower
- Splashback grout that has darkened
- Cracked grout along the bath or tray
Regrouting in Allbrook: local notes
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Chandlers Ford station? Then a regrout while the flat is empty is quicker than working around a tenant. Managing a site like Scantabout Primary School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Allbrook is about 1 mile east of Chandler's Ford, in Hampshire. From the centre of Allbrook to the outskirts, we cover regrouting for every kind of property. Across Hampshire, we cover 683 places, Allbrook among them.
Every address in SO53, SO50 and SO21 is within our area for regrouting, from the main roads to the quietest streets. If you need regrouting at a property on Verona Road, Apollo Road and Boyatt Lane or a nearby road, our applicators can take on the job. We also cover the places around Allbrook: Boyatt Wood (1 mile south), Highbridge (1 mile east), Lord's Wood (1 mile east), Chandler's Ford (1 mile west) and Hiltingbury (1 mile north-west). Further out, we also cover Winchester (5 miles north), Fareham (12 miles south-east), Totton (8 miles south-west), Hedge End (6 miles south-east), Romsey (5 miles west) and Hythe (9 miles south).
Landmarks near Allbrook
Around Allbrook, our work takes us to homes and buildings near Thornden School, The Otter pub and Thornden School. The nearest railway station is Chandlers Ford station, about 1.3 miles west of the centre. A little further out are Eastleigh Museum (1.4 miles south) and Moorgreen Hospital (4.5 miles south). For a walk, there’s Flexford Nature Reserve.
How we handle regrouting in Allbrook
We work across Allbrook, regrouting bathrooms, showers and kitchens. The old grout is raked out, the joints cleaned and new grout laid, and we finish by resealing the edges. Typical jobs include stained grout that cleaning won’t shift and discoloured grout on otherwise sound tiles, across kitchen splashbacks, shower walls and bathroom wall tiles.
Even in a smaller place like Allbrook, bathrooms and kitchens see heavy daily use. Whether it’s a cottage bathroom or a newer en suite, the approach is the same: old sealant or grout cut out, joints cleaned and dried, and a fresh finish laid.
There’s a 12-month guarantee on every job.
- Location
- Allbrook (SO53, SO50, SO21)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before work begins
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Places near Allbrook
Other services in Allbrook
The process
On the day, we start by going over the job with you, so there are no surprises. Surfaces next to the work are protected before work begins. Most jobs take anything from a few hours to a full day, depending on the area. In a smaller place like Allbrook, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- We check the tiles are sound and flag any that are loose or hollow.
- We rake out the old grout to an even depth, taking care of the tile edges.
- We vacuum the joints and clean out the dust.
- Fresh grout goes into the joints and the tile faces are wiped clean.
- The corners and edges get new silicone, because grout there would crack.
Preparing for the visit
- On commercial sites, let us know about site rules
- Let us know if you’ve seen damp or leaks
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. Whenever you’re ready, call 0345 464 0079 or email us.
Related advice
How to look after the new joints
Good habits help new joints last longer. Our tips:
- Keep harsh bleach and acid cleaners off the grout
- Use a soft brush rather than a wire one
- Have loose tiles looked at early
- Wipe water off the walls when you’re done
Give the new grout the time we tell you before using the shower, so it can harden properly. After that, rinse the tiles after showering and keep the room ventilated.
If grout in the shower is washing out, act soon. Each shower drives water into the open joints and it can end up in the wall or the ceiling below.
For landlords and businesses
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
Surface by surface
Shower walls
Shower walls get wet every day, so grout there works hardest. It generally fails first.
Bathroom floors
Cracked floor grout can point to movement underneath. We look for loose tiles first.
What sealant work can’t fix
New sealant can’t fix everything, and we’d rather say so up front. Sealant will not put right:
- Leaks from pipes, valves or wastes (a plumber’s job)
- Movement in a stud wall or floor
- Cracked or broken tiles
If in doubt, phone 0345 464 0079 or drop us an email and we will say what we think.
Where we work in Allbrook
- Bathroom floors
- Bathroom wall tiles
- Shower walls
- Tiled floors
- Wet rooms
- Kitchen splashbacks
Your questions about regrouting in Allbrook
Is Allbrook in your area for regrouting?
Yes. Our work covers London and the South East, and Allbrook is part of that. You can ring 0345 464 0079 or drop us an email and let us know what needs doing, and we’ll send you a clear quote.
Will you come out to Allbrook?
Yes. Allbrook is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is it messy?
No. We protect the surfaces around the joints, and we tidy up before we go.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned.
How long will you be here?
Most jobs take a few hours, or longer for a fully tiled room. We’ll confirm how long when we quote.
Where do you work from?
Mr Mastic is based in Crawley. Our applicators cover Allbrook, along with the rest of our area.
What if some of my tiles are loose?
Loose tiles need refixing before regrouting. We will show you which ones at the start.
Do the sealants smell?
Possibly a little. It fades as the sealant cures, and ventilation helps.
Why deal with it now?
Bleach can lighten stained grout for a while, but stains and mould that have soaked in tend to return. Replacing the grout and resealing the edges is a lasting fix. Around Allbrook, water from a failed joint in an older home can soak into timber and plaster, and that is a much bigger job than renewing the sealant.
What it costs depends on the size of the job, how much old material has to come out and how easy the joints are to reach. You will have a clear quote before any work starts.
Why Allbrook customers choose us
- More than 20 years in sealant work
- Old sealant always removed completely
- Fully insured
- Homes, businesses and hotels
Take a look at our cost guide and what customers say.
What we’re called out for in Allbrook
A poor original job is a common cause. Grout that was too wet, not packed in or cleaned off too hard can wash out within a few years.
Look out for these signs:
- Stained grout that cleaning won’t shift
- Good tiles let down by tired grout
- Greasy, stained grout behind the hob
- Grout in corners that has cracked
For an older house near a landmark such as St. Peter's Church, older homes can move a little, which is hard on rigid grout and tired sealant.
Questions to ask before booking
- Whether the sealant suits the joint
- How the joint is cleaned and prepared
- Whether they’re fully insured
- What the quote includes, VAT included or not