Hampshire · England
New Build Mastic in Worting
New build mastic in Worting from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Shower seals failing in the first year or two
- Cracked caulk along new skirting
- Gaps opening as the house dries out and settles
How we handle new build mastic in Worting
We work in new homes and on new-build sites across Worting. Whether it’s one en suite or a run of plots, the method is the same: remove, clean, prime where needed, then a neat new bead. Typical jobs include second-fix sealing on new plots and beads laid onto grit and dust from the build, on bathrooms & en suites, plot handovers and windows & doors.
Homes around Worting range from older cottages to newer houses, and their floors range just as widely, from timber that moves with the seasons to tiles laid on concrete. The sealant at skirtings and thresholds has to suit the floor it meets.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Place
- Worting (RG22, RG23)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
How it works
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The work itself takes a few hours for most snagging lists, longer for a run of plots. Parking around Worting is generally easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- We go through the snagging list or plot schedule and agree the joints to do.
- We cut out every bit of the failed or messy sealant.
- Surfaces are cleaned of building dust and primed where needed.
- We apply a sealant that suits each joint and tool it to a neat finish.
- Finally, each room is checked and you are given the cure time.
How to prepare
- Tell us about any previous sealing or DIY attempts
- Let us know if you’ve seen damp or leaks
- Clear items away from the joints we’re working on
Get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
Advice
Places near Worting
What else we do in Worting
Joints and finishes in Worting homes
Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
In and around Worting, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.
Worting is about 2 miles west of Basingstoke, in Hampshire. For new build mastic in and around Worting, it’s easy to get a quote: please call 0345 464 0079 or email us. We cover Hampshire from our Crawley base. Our Hampshire coverage runs to 683 places, Worting among them. We also work in Reading, about 15 miles from Worting.
All of RG22 and RG23 is within our area for new build mastic. Local streets include Warham Road, Church Lane and Wayside Road, and we cover them all. Close by, we work in Buckskin (1 mile south-east), Winklebury (1 mile north-east), South Ham (1 mile east), Kempshott (1 mile south) and Newfound (1 mile west). Within a short drive, we also cover Fleet (13 miles east), Andover (15 miles west), Alton (10 miles south-east), Yateley (14 miles east), Tadley (6 miles north) and Hook (8 miles east).
What’s near Worting
Typical jobs here are in homes near The White Hart Inn, Bishop Challoner Catholic Secondary School and Coppice Spring School. The nearest railway station is Basingstoke station, roughly 2.1 miles east of the centre. Well-known places in the area include Park Prewett Hospital (1.5 miles north-east) and Basing House (3.7 miles east). Not far away are Farleigh Hill and Daneshill Park Woods.
Why it’s worth doing now in Worting
Water getting past a failed seal in a new build reaches walls and floors that are still settling. Dealing with it early keeps the damage away from ceilings, floors and finishes. In an older home around Worting, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.
Combining jobs into one visit generally makes better use of the time than several visits, so tell us about everything that needs sealing. We’ll give you a clear quote for the lot.
Why book with us
- A 12-month guarantee on all work
- We never seal over old sealant
- Approved under the ARBOMaster scheme
- Sanitary silicone with an anti-fungal additive in wet areas
Read what affects the cost or our reviews.
Different surfaces, different methods
Plot handovers
Good preparation at handover saves snagging later. Dust from the build is removed first and prime where the product needs it.
Bathrooms and en suites
Trays and baths in new builds settle as they’re used. The joint is stripped back before the new bead goes in and baths are filled before sealing.
Keeping the joints in good condition
A little care helps the new joints last. We recommend:
- Report sealant problems to your builder during the snagging period
- Don’t seal over failed sealant yourself
- Check bath and shower seals every few months as the house settles
- Record problems with dated pictures
Watch the joints as the house settles. Hairline gaps can open as timber and plaster dry.
A seal that splits early is often a sign of movement. Getting it resealed properly, and any movement checked, stops it recurring.
What affects the quote in Worting
The quote reflects the job in front of us. We look at:
- The number of rooms or windows
- Mould in or behind the old joints
- The old material and how stubborn it is
- The product the joint needs
The cost depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You’ll have a clear quote before any work starts, so you know where you stand.
What to tell us for a quote
When you call or email, these details help:
- Roughly how big the job is
- How we’d reach the joints
- What’s wrong with the joints now
- Photos by email, if that is easy
For a quick quote, get us on the phone, or email us if that’s easier. Tell us about the joints that need doing and we will talk you through the work.
Questions from Worting
Do you cover smaller places like Worting?
Yes, Worting is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Can you do new build mastic in Worting?
Yes, Worting is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or send us an email and let us know what needs doing, and we will give you a clear quote.
When is the best time to reseal in a new build?
It depends on whether water is getting through. Failed seals in wet areas need doing now, but cosmetic gaps can wait for movement to slow.
Is the work guaranteed?
Yes, for a year. If anything isn’t right with the work within the year, let us know and we’ll sort it.
Can I send you my snagging list?
Yes. Send us the sealant items on the list, with pictures if you can, and we’ll quote. We’ll flag anything that needs another trade.
Do I have to be there?
We need access to the joints, so we’ll agree that with you when we book. Indoors, that usually means someone at home.
What should I tell you?
Let us know what needs doing and where. If we need more, we will ask.
Why has my new-build shower seal failed already?
It’s common, and there are usually two reasons: movement as the house dries and settles, and sealant laid onto dust without primer. A proper reseal deals with both.
What we are called out for in Worting
The first winter with the heating on dries a new home quickly. Gaps open along skirting, frames and worktops and cracked sealant shows up.
Look out for these signs:
- Beads laid onto grit and dust from the build
- Joints pulling apart as timber shrinks
- Cracked caulk along new skirting
- Messy sealant that spoils new finishes
For new homes near Basingstoke station, it’s worth checking the sealant early, while snags are still fresh.
What your quote should include
- The length of the guarantee
- How the colour is chosen
- Whether all the old sealant comes out first
- How much experience the applicator has
DIY sealant or a professional job?
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.