Hampshire · England

New Build Mastic in Buckskin

New build mastic in Buckskin from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.

  • Shower seals failing in the first year or two
  • Worktop and upstand sealant coming away
  • Sealant work across a run of new homes

New build mastic in Buckskin

About our new build mastic in Buckskin

Developers send us the plot schedule and we work through it. Bathrooms, en suites, kitchens, frames and skirting are sealed ready for handover with a sealant suited to each area. We work on bathrooms & en suites, skirting & floors and show homes, and common reasons people get in touch are internal frame sealant that has split and shower seals failing in the first year or two.

If you’ve bought a new home in or near Buckskin, the first year or two is a good time to check the sealant. Common snags include open skirting joints, lifting shower seals and gaps around frames.

Whatever the size of the job, it’s backed by our 12-month guarantee in Buckskin and across Hampshire.

Sealant gun close-up on a shower enclosure wall joint
Place
Buckskin (RG22, RG23)
Wider area
Hampshire
Cover
A year, on every job
Quotes
A clear quote up front
Call
0345 464 0079
Page updated
26 October 2026

When something else is needed

It helps to know what we can’t do too:

  • Baths and trays that move too much for sealant to cope with
  • Your warranty claim itself, which is between you and the builder
  • Damaged fittings that need replacing

Not sure which it is? You can ring 0345 464 0079 or send us an email and we’ll tell you honestly before you book.

Surfaces we seal

  • Kitchens
  • Plot handovers
  • Windows & doors
  • Bathrooms & en suites
  • Show homes
  • Skirting & floors

What we are called out for in Buckskin

Not every new-build joint gets the right sealant: caulk where water collects, or a rigid product on a moving joint. Both fail early.

Keep an eye out for any of the following:

  • Shower seals failing in the first year or two
  • Cracked sealant around new window and door frames
  • Beads laid onto grit and dust from the build
  • Joints pulling apart as timber shrinks

For new homes near Basingstoke station, it’s worth checking the sealant early, while snags are still fresh.

What to look for in a quote

  • Who does the work, and how experienced they are
  • How the joint is cleaned and prepared
  • How long the guarantee is
  • Whether VAT is included

Our hiring checklist

Surface by surface

Show homes

Tired or marked sealant in a show home can be renewed. The old bead comes out and a clean new one goes in.

Skirting and floors

Floors and skirting move as the house dries and the heating runs. We use a flexible product rather than caulk painted or coloured to suit.

What affects the quote in Buckskin

Jobs vary more than people expect. What affects the quote:

  • Which sealant suits the joint
  • Access and height
  • How many rooms, windows or areas are involved
  • Whether there’s mould to deal with

The cost reflects the work involved, not guesswork. That is why we ask a few questions first and agree the price before starting.

What we need to know

When you contact us, it’s useful to know:

  • The rough size of the job
  • What the problem is, such as mould, gaps, leaks or cracking
  • Where the property is
  • Photos by email, if that is easy

For a quote, call 0345 464 0079 or send us an email with the location and a short description of the problem. We’ll give you a clear price before any work starts.

For landlords and businesses

Landlords and letting agents in Buckskin can book us as well as householders. Resealing between tenancies keeps a property looking cared for before the next move-in.

From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.

Buckskin: your questions answered

Is Buckskin in your area for new build mastic?

Yes. Our work covers London and the South East, and Buckskin is part of that. You can phone 0345 464 0079 or send us an email and tell us what needs doing, and we’ll give you a clear quote.

Will you come out to Buckskin?

Yes, Buckskin is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.

Should I try DIY first?

You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.

Do you take out the old sealant first?

Yes, every time. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.

Will it make a mess?

No. We work neatly, protect the area around the joints and tidy up afterwards.

Can you work on commercial sites?

Yes. Larger jobs can be planned room by room or area by area to suit the site.

Where are you based?

Mr Mastic is based in Crawley. We cover Buckskin and the rest of Hampshire.

How long should I leave it?

It depends on the product. Before we leave, we’ll tell you the cure time.

New build mastic around Buckskin

London and the South East are among the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.

Around Buckskin, as everywhere, new build mastic is only as good as the preparation behind it.

Buckskin is about 1 mile west of Basingstoke, in Hampshire. We carry out new build mastic for householders, landlords and businesses in Buckskin, as part of our work across Hampshire. Buckskin is one of 683 places in Hampshire we cover. We also work in Reading, about 15 miles from Buckskin.

Jobs for new build mastic in RG22 and RG23 works the same way as everywhere else we cover. Streets in the area include Warham Road, Church Lane and Wayside Road, and we cover them all. Close by, we work in Worting (1 mile north-west), Winklebury (1 mile north-east), South Ham (1 mile east), Kempshott (1 mile south) and Brighton Hill (1 mile south-east). Further out, we also cover Fleet (13 miles east), Alton (10 miles south-east), Yateley (14 miles north-east), Tadley (7 miles north), Bordon (15 miles south-east) and Hook (8 miles east).

Local landmarks in Buckskin

In Buckskin, that means homes and buildings near The White Hart Inn, Bishop Challoner Catholic Secondary School and Coppice Spring School. The closest station to Buckskin is Basingstoke station, roughly 2 miles east of the centre. Nearby you will also find Park Prewett Hospital (1.6 miles north) and The Malls (2 miles east). Not far away are Farleigh Hill and Daneshill Park Woods.

Map of Buckskin © OpenStreetMap contributors

What happens on the day

At the end, we look at the finished work together and explain the cure time. The work normally takes a few hours in a single home, depending on how much there is to do. For a job in Buckskin, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.

  1. We start by going through the snagging items or plot schedule with you.
  2. The failed sealant is removed completely.
  3. We clean out the dust and grit left from the build.
  4. We prime where needed and apply a sealant suited to each joint.
  5. Each bead is tooled and the cure times explained.

Preparing for the visit

  • Let us know about stairs, lifts or work at height
  • Mention any parking rules near the property
  • Let us know if you’ve seen damp or leaks

How to get a quote

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.

Get a quick quote

Advice

How to look after the new joints

A little care helps the new joints last. Our advice:

  • Do not wait for the house to settle if water is getting through
  • Resist patching a failed seal with a tube from the DIY shop
  • Ventilate bathrooms well, especially in the first year
  • Raise failed sealant with the developer while you are covered

Leave the sealant for the cure time we give you before showering or bathing. Silicone is generally left for about a day.

If a shower tray or bath seal splits in the first year, look for movement. Getting it resealed properly, and any movement checked, stops it recurring.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job