Hampshire · England

New Build Mastic in South Town

Our applicators work in South Town on plot mastic for developers and snagging failed sealant in new homes. Old sealant removed completely, joints prepared properly.

  • Smeared, uneven beads picked up at snagging
  • Kitchen sealant that has pulled off the wall
  • Shower seals failing in the first year or two

Book new build mastic in South Town

Aftercare tips

Good habits help new joints last longer. Our tips:

  • Keep water off fresh sealant until it has cured
  • Open a window or run the fan after bathing
  • Watch for new gaps as the house dries out
  • Photograph failed sealant before it’s redone

Ventilation matters in a new home, which is still drying out. Use the extractor fan or open a window after showers to help keep mould away.

Report failed sealant to the builder while you’re in the snagging period. Once it ends, the repair may be down to you so report it promptly.

About our new build mastic in South Town

Our new-build work comes in two parts: plot mastic for developers, and putting right failed sealant for people who’ve bought a new home. Both get the same care over preparation. If you have untidy sealant flagged on a snagging list and sealant that never bonded to the surface, we can help, whatever the surface.

Somewhere as small as South Town, new homes tend to be conversions, self-builds or a few houses rather than an estate. Each still needs its sealant and floor joints finished properly.

Whatever the size of the job, it’s backed by our one-year guarantee in South Town and across Hampshire.

Where
South Town (GU34)
Region
Hampshire
Guarantee
One year on every job
Price
Quoted before any work starts
Call
0345 464 0079
Page updated
26 October 2026
Silicone being applied where a shower enclosure meets beige wall tiles

Landlords, agents and businesses in South Town

In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.

Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.

What affects the quote in South Town

We quote each job individually. These are the things that affect it:

  • Mould in or behind the old joints
  • The old material and how stubborn it is
  • How many rooms, windows or areas are involved
  • The product the joint needs

A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.

Asking for a quote

Photos help, but a description is a good start. Try to tell us:

  • The rough size of the job
  • What the problem is, such as mould, gaps, leaks or cracking
  • Where the job is, and your postcode
  • Any access issues, like height or stairs

For new build mastic in South Town, phone 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.

When something else is needed

To be straight with you, some problems need a different trade:

  • Settlement cracks that need a surveyor
  • Your warranty claim itself, which is between you and the builder
  • Baths and trays that move too much for sealant to cope with

If in doubt, call 0345 464 0079 or send us an email and we will say what we think.

What we seal

  • Plot handovers
  • Skirting & floors
  • Kitchens
  • Bathrooms & en suites
  • Show homes
  • Windows & doors

DIY versus a professional finish

The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.

If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so just mention it when you contact us.

FAQs for South Town

I let a flat near Alton station. Can you help?

Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can ring 0345 464 0079 or email us with the details for a clear quote.

Do you cover smaller places like South Town?

Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.

Why does sealant fail so quickly in new builds?

New homes dry out and move in their first couple of years, and sealant is often applied quickly onto dusty surfaces. Both lead to early failure.

How long does the job take?

It depends on the size of the job, but as a guide it takes anything from a few hours to several days, depending on the number of plots. We’ll tell you when we quote.

Is there a guarantee?

Yes, for a year. If there’s a problem with our work in that time, tell us and we’ll put it right.

How much does new build mastic cost in South Town?

Every job is different, so each one gets its own quote. To get one, phone 0345 464 0079 or send us an email with a short description of the job.

Can new sealant go on top of the old bead?

No. We always remove the existing bead, then clean and prime the joint, and a new bead applied.

Can you quote for more than one area?

Yes, we can. More than one area can go on one quote.

What new build mastic looks like in South Town

Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.

In and around South Town, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.

South Town is about 4 miles west of Alton, in Hampshire. South Town gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. South Town is one of 683 towns and villages in Hampshire where we work for new build mastic. We also work in Southampton, about 20 miles from South Town.

Every address in GU34 is within our area for new build mastic. Streets in the area include High Street, Church Lane and Green Stile, and we cover them all. Neighbouring places we cover for new build mastic include New Copse (1 mile north), Hattingley (1 mile west), Medstead (1 mile south-east), Soldridge (1 mile south) and Holt End (1 mile north). Larger places within reach include Basingstoke (10 miles north), Winchester (12 miles south-west), Fleet (14 miles north-east), Horndean (15 miles south), Alton (4 miles east) and Petersfield (10 miles south-east).

Around South Town

The nearest railway station is Alton station, about 4.5 miles east of the centre. Nearby you will also find Barton Castle (2.2 miles west) and Alton Community Hospital (3.4 miles east). Green spaces nearby include King's Hill.

Map of South Town © OpenStreetMap contributors

Do you need new build mastic in South Town?

Once people move in, baths and trays take weight and bed down. A bath sealed empty drops slightly when filled, straining the joint and can tear.

Keep an eye out for any of the following:

  • Sealant that never bonded to the surface
  • Cracked sealant around new window and door frames
  • Cracks appearing as a new home settles
  • Messy sealant that spoils new finishes

For new homes near Alton station, it’s worth checking the sealant early, while snags are still fresh.

Questions to ask before you book

  • Whether they seal over old material or remove it
  • How the joint is cleaned and prepared
  • Is VAT in the price?
  • Are they insured?

10 questions to ask before booking

The process

Good joint work is mostly preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. In total, it normally takes anything from a few hours to several days, depending on the number of plots. Somewhere like South Town needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. First, the list of joints is agreed from your snagging sheet or plot schedule.
  2. The failed sealant is removed completely down to clean surfaces.
  3. We clean out the dust and grit left from the build.
  4. Primer goes on where the surface and product need it, then the new sealant.
  5. Each bead is tooled and the cure times explained.

Getting ready for the visit

  • For business premises, tell us about site rules or sign-in
  • Plan for the work area to be out of bounds to pets and children
  • Move anything stored near the joints

How to get a quote

Every job is quoted individually. Simply phone 0345 464 0079 or send us an email and describe the job and send photos if you have them.

Get a price

Advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job