Aberdeen · Scotland
New Build Mastic in Rubislaw
Specialist new build mastic for Rubislaw: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Smeared, uneven beads picked up at snagging
- Cracked caulk along new skirting
- Leaking shower tray seals in a new home
What we can’t put right
Some problems need a builder, plumber or other trade rather than us:
- Baths and trays that move too much for sealant to cope with
- Plumbing faults behind the sealant
- Broken tiles or a split tray
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we will tell you honestly.
What we seal
- Show homes
- Kitchens
- Windows & doors
- Plot handovers
- Skirting & floors
- Bathrooms & en suites
About our new build mastic in Rubislaw
Developers send us the plot schedule and we work through it. We seal bathrooms, kitchens, windows, doors and skirting so plots are ready to hand over with a sealant suited to each area. We work on windows & doors, kitchens and skirting & floors, and the jobs we see most are skirting joints opening in the first winter and smeared, uneven beads picked up at snagging.
In a Scottish city, commercial floors have movement joints and thresholds that wear under traffic. In Rubislaw, we cover those floor joints as well as plot mastic for developers.
Each job carries a 12-month guarantee, whatever its size.
- Place
- Rubislaw (AB15, AB10, AB16)
- Region
- Aberdeen
- Guarantee
- A year, on every job
- Quotes
- A clear price before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
When to call us in Rubislaw
Sealant is often one of the last jobs before handover. Joints are not always cleaned of dust or primed, and the sealant sits on grit instead of the surface.
These are the problems we are asked about most:
- Internal frame sealant that has split
- Skirting joints opening in the first winter
- Sealant that never bonded to the surface
- Smeared, uneven beads picked up at snagging
In and around Rubislaw, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.
Questions to ask before you book
- Whether the sealant suits the joint
- What happens if they find a problem under the old sealant
- How the joint is cleaned and prepared
- Who does the work, and how experienced they are
What happens if it’s left?
A tube of sealant from the DIY shop will not fix the cause: dust, no primer and old sealant left in the joint. Proper removal and preparation are what make it last. Private landlords in Rubislaw must meet the Repairing Standard, and damp or leaks can fall short of it, so failed sealant is best replaced before it becomes a complaint.
Combining jobs into one visit usually makes better use of the time than several visits, so tell us about everything that needs sealing. We will give you a clear price for the lot.
Why book with us
- 180+ five-star Google reviews
- Trusted Arbo and Everbuild sealants
- Any old sealant cut out fully, not covered over
- 20+ years of sealant experience
See what affects the cost and our reviews.
New build mastic around Rubislaw
Rubislaw is within about 3 miles of the coast. Plot mastic on new homes near the coast takes more weather than it would inland, so it’s worth checking at snagging. Many new homes in Scotland are timber-framed, and as the frame dries and settles, skirting and sealant joints can open up.
If you’ve bought a new home near Aberdeen station, the sealant around baths, showers and frames is worth checking in the first year or two.
Rubislaw is about 1 mile south-west of Aberdeen, in Aberdeen. Wherever you are in the AB15 postcode area, we cover new build mastic for homes and businesses. Our Aberdeen coverage runs to 63 places, Rubislaw among them.
Jobs for new build mastic in AB15, AB10 and AB16 works the same way as everywhere else we cover. If you need new build mastic at a property on Forest Road, Harlaw Road and Bayview Road or a nearby road, our applicators can take on the job. Being close to the A9119, Rubislaw is easy for our applicators to reach. Neighbouring places we cover for new build mastic include Midstocket (1 mile north), West End (1 mile south), Queen's Cross (1 mile east), Summerhill (1 mile north-west) and Craigiebuckler (1 mile south-west). Further out, we also cover Dyce (5 miles north-west), Portlethen (6 miles south), Cove Bay (3 miles south-east), Bucksburn (3 miles north-west), Peterculter (6 miles south-west) and Kingswells (3 miles west).
What’s near Rubislaw
In Rubislaw, that means homes and buildings near Rubislaw and Queens Terrace Gardens, Airyhall Primary School and North East of Scotland Music School and the streets around them. The closest station to Rubislaw is Aberdeen station, roughly 1.6 miles east. A little further out are Trinity Centre (1.5 miles east) and Gordon Highlanders Museum (0.5 miles south-west). For a walk, there’s Rubislaw Quarry and Gallows Hill.
Nearby places to Rubislaw
More services for Rubislaw
FAQs for Rubislaw
Do you cover Rubislaw for new build mastic?
Yes, Rubislaw is within the area we cover. Our work covers the whole of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job, and we’ll send you a clear quote.
I let a flat near Aberdeen station. Can you help?
Yes, rental work is part of what we do. You can email us at info@mrmastic.co.uk with the address and a few details, and we will give you a fixed price before we start.
Why does sealant fail so quickly in new builds?
New homes dry out and move in their first couple of years, and sealant is often applied quickly onto dusty surfaces. Both lead to early failure.
How much does new build mastic cost in Rubislaw?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Where do you work from?
Our base is Crawley, with over 20 years’ experience. We work across South East England, London and Scotland.
What should I tell you?
A short description and the location, plus pictures if you have them. If we need more, we will ask.
Do you take out the old sealant first?
Always. Sealing over old sealant is the main reason resealing fails early, so we never do it.
Can you work from my snagging list?
Yes. Send it with photos and we will quote for the sealant items. Items that need a plumber, tiler or the builder are flagged.
How to look after the new joints
A little care helps the new joints last. Our advice:
- Resist patching a failed seal with a tube from the DIY shop
- Keep water off fresh sealant until it has cured
- Clean sealant with mild detergent, not abrasives
- Open a window or run the fan after bathing
Keep an eye on the joints over the first couple of years. Hairline gaps can open as timber and plaster dry.
The sooner you deal with untidy or cracking sealant, the less there is to put right. Left alone, a small crack can become a leak in a busy bathroom.
How the job changes by surface
Skirting and floors
Floors and skirting move as the house dries and the heating runs. We use a flexible product rather than caulk in a colour to suit.
Windows and doors
A draught at a new window can be a missed or failed joint. We look at the joints and reseal where needed.
The process
Once we’re on site, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. Most jobs then take a few hours for most snagging lists, longer for a run of plots. For a tenement in Rubislaw, work inside your flat is between us and you, while shared parts may need the factor or neighbours to agree. It helps to know which it is when you get in touch.
- We look at why each joint failed, including any movement.
- Old sealant is cut out and the joints cleaned.
- We make sure the joints are dry and prime them if needed.
- Baths are filled with water, then the new sealant is applied.
- The finished joints are checked and the cure times given.
Preparing for the visit
- On commercial sites, let us know about site rules
- Clear the area around the work
- Keep children and pets away from the work area
Getting a quote
For a quote, send an email to info@mrmastic.co.uk with the location and a short description of the problem. You will have a clear quote before work begins.
Related advice
What affects the cost of new build mastic
There’s no set price list, because jobs vary so much. What we look at:
- The size of the job
- Any mould that needs treating
- Which sealant suits the joint
- Whether old sealant or filler has to be cut out
The cost depends on the size of the job, how much old material has to come out and how easy the joints are to reach. We give a clear quote before we start, so you know where you stand.
Asking for a quote
To make quoting easier, please include:
- Any access issues, like height or stairs
- Photos by email, if that’s easy
- Where the property is
- Any previous sealing or DIY work
If you are in Rubislaw and need new build mastic, drop us a line at info@mrmastic.co.uk. Tell us what the problem is and where, and we will agree the price before any work begins.