Kent · England
New-build mastic & snagging in Nash, Kent
Plot mastic for developers and snagging failed sealant in new homes in Nash, with a one-year guarantee on every job. Call for a quick quote.
- Worktop and upstand sealant coming away
- Untidy sealant flagged on a snagging list
- New-build shower sealant that has already split
Common questions in Nash
I let a flat near Adisham station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can ring 0345 464 0079 or email us with the details for a clear quote.
Will you come out to Nash?
Yes. Nash is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
How long before the joint can be used?
Different products cure at different speeds, so follow the cure time we give you when we finish.
Can you do several jobs on one visit?
Yes. Just list everything you need and you will get one quote.
How do I get a quote for new build mastic in Nash?
The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote and we’ll talk you through it.
Can new sealant go on top of the old bead?
No. New silicone won’t bond to old silicone, so sealing over the top fails quickly. The old sealant always comes out first.
Are you insured?
Yes, we’re fully insured for domestic and commercial work.
What do you need from me for a quote?
Only a few details: where it is, what you’ve noticed and how we reach it. After that, simply call 0345 464 0079 or drop us an email.
New build mastic in Nash, done properly
We work in new homes and on new-build sites across Nash. One shower or a whole phase of plots, the method doesn’t change: remove, clean, prime where needed, then a neat new bead. We work on skirting & floors, windows & doors and kitchens, and people most often call us about frame joints opening as the plaster dries and new-build shower sealant that has already split.
For a small place like Nash, the journey and access are planned in advance, and once on site, the job is the same as anywhere.
The work is covered for a year after we finish. If anything isn’t right with it, phone 0345 464 0079 or email us.
- Location
- Nash (CT3)
- Region
- Kent
- Guarantee
- One year on every job
- Price
- A clear price before work begins
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
For landlords and businesses
We work for landlords and agents as well as householders. Sealant work between tenants is a simple way to keep a property in good order.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Places near Nash
What else we do in Nash
Honest limits
A few problems are outside what sealant work can do:
- A tray or bath that isn’t properly supported, until it’s fixed
- Cracking that points to a structural problem
- Leaks from pipes, valves or wastes, which need a plumber
Not sure which it is? You can phone 0345 464 0079 or send us an email and we will tell you honestly.
Surfaces we seal
- Bathrooms & en suites
- Skirting & floors
- Kitchens
- Windows & doors
- Show homes
- Plot handovers
Why deal with it now?
It often makes sense to do all the sealant items on a snagging list together. It’s one visit, one quote and one set of cure times. Where a wall is exposed, as many are in small places like Nash, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all play a part.
Why Nash clients choose us
- Tidy, careful work
- An ARBOMaster approved applicator
- We agree the colour with you first
- A choice of colours where the product allows
When to call us in Nash
Not every new-build joint gets the right sealant: caulk where water collects, or a rigid product on a moving joint. Both fail early.
The most common problems we see are:
- Kitchen sealant that has pulled off the wall
- Gaps opening as the house dries out and settles
- Second-fix sealing on new plots
- Sealant that never bonded to the surface
If you’ve bought a new home near Adisham station, the sealant around baths, showers and frames is worth checking in the first year or two.
What to look for in a quote
- Is the old sealant removed completely?
- What happens if the job turns out different
- Which sealant they’ll use, and why
- Is VAT in the price?
Surface by surface
Show homes
Tired or marked sealant in a show home can be renewed. We cut it out and reseal neatly.
Windows and doors
A draught at a new window can be a missed or failed joint. We check and reseal the frame edges.
Joints and finishes in Nash homes
Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
In and around Nash, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.
Nash is about 7 miles east of Canterbury, in Kent. From the centre of Nash to the outskirts, we cover new build mastic for every kind of property. Nash is one of 922 towns and villages in Kent where we work for new build mastic. We also work in Chelmsford, about 45 miles from Nash.
Work in CT3 works the same way as everywhere else we cover. Close by, we work in Hoaden (1 mile north-east), Perry (1 mile west), Shatterling (1 mile south-west), Elmstone (1 mile north) and Durlock (1 mile south-east). Within a short drive, we also cover Canterbury (7 miles west), Margate (9 miles north-east), Dover (10 miles south), Folkestone (14 miles south), Ramsgate (8 miles north-east) and Broadstairs (10 miles north-east).
Landmarks near Nash
The closest station to Nash is Adisham station, roughly 3.7 miles south-west. Well-known places in the area include White Mill (3.6 miles east) and St Martins Hospital (6 miles west). For a walk, there’s Monk's Wall nature reserve.
What we do, step by step
Most of a good job is in the preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it usually takes anything from a few hours to several days, depending on the number of plots. In a small place like Nash, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at why each joint failed, including any movement.
- We remove the failed sealant and clean the joints.
- We make sure the joints are dry and prime them if needed.
- New sealant goes in, with baths filled first so they’re at their heaviest.
- The finished joints are checked and the cure times given.
Preparing for the visit
- Mention if the joints have been sealed before
- Plan for the work area to be out of bounds to pets and children
- On commercial sites, let us know about site rules
How to get a quote
Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. A few photos by email make the job easier to understand, and we will take it from there.
Read more
How we quote for new build mastic
The price is agreed before any work begins. It takes into account:
- How easy the joints are to reach
- The product the joint needs
- Any mould that needs treating
- The amount of work
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
What to tell us for a quote
What to tell us when you ask for a quote:
- Any access issues, like height or stairs
- If someone has resealed it before
- Roughly how big the job is
- The type of property
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email photos if that is easy.