Fife · Scotland
New Build Mastic in Lochore
Problem with your new-build sealant joints in Lochore? We cut out the old, prepare the joints and apply the right sealant.
- Messy sealant that spoils new finishes
- Shower seals failing in the first year or two
- Gaps behind new kitchen upstands
What happens on the day
A visit follows a simple pattern: we look at the joints together, mask and protect the surrounding surfaces, carry out the job and clear up. Most jobs take a few hours in a single home. Outdoor work around Lochore depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Work indoors is not affected.
- We start by going through the snagging items or plot schedule with you.
- Every bit of the old builder’s sealant is cut out, with no layer left behind.
- We clean out the dust and grit left from the build.
- Primer goes on where the surface and product need it, then the new sealant.
- We tool every joint neatly and tell you when each area can be used.
How to prepare
- Where the joints are inside, avoid wetting them before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us about any previous sealing or DIY attempts
Getting a quote
If you’re in Lochore and need new build mastic, email us at info@mrmastic.co.uk. Tell us what the problem is and where, and you will get a clear quote before any work starts.
Read more
New build mastic in Lochore, done properly
New homes move as they dry out. Timber dries and shrinks, and baths and trays settle, so sealant that was laid quickly before handover often cracks. We’re often asked to deal with worktop and upstand sealant coming away and gaps between new skirting and floors, on skirting & floors, kitchens and show homes.
Around smaller Scottish places like Lochore, new homes tend to be single plots or small developments. They need their sealant and floor joints finished just as carefully as on a big site.
There’s a 12-month guarantee on every job.
- Where
- Lochore (KY5)
- Wider area
- Fife
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Also near Lochore
More services for Lochore
Surface by surface
Kitchens
Worktop, upstand and sink joints in new kitchens often get a hurried bead. We take it out and reseal neatly, colour-matched where it shows.
Skirting and floors
New homes often develop a gap between skirting and floor. A flexible sealant closes it without cracking like caulk.
Questions from Lochore
Is Lochore in your area for new build mastic?
Yes, Lochore is within the area we cover. Our work covers the whole of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job.
Is Lochore within the area you cover?
Yes, smaller places are covered as well as towns. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
What sealant do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we’ll tell you what we’re using.
How long will you be here?
As a guide, most jobs take a few hours in a single home. Larger jobs naturally take longer, and we will say how long yours will take.
Should I go to my builder first?
Start with the builder if you’re in the snagging or warranty period. If it isn’t resolved, we’ll cut it out and reseal it.
Where do you work from?
We work from Crawley. We cover Lochore and the rest of Fife, along with the rest of our area.
Do you use white or clear sealant?
That depends on what the joint meets: white or clear for most sanitary joints, colours for worktops, floors and frames. We agree the colour before any work starts.
What should I tell you?
Let us know what needs doing and where. If we need more, we’ll ask.
Keeping the joints in good condition
No joint lasts for ever, but care makes a real difference. A few tips:
- Avoid scourers and strong chemicals on sealant
- Photograph failed sealant before it’s redone
- Wait for the cure time before using a resealed shower
- Avoid running a DIY bead over the old one
Keep the bathroom ventilated, especially in the first year. Use the extractor fan or open a window after showers to help keep mould away.
Report failed sealant to the builder while you’re in the snagging period. Once it ends, the repair may be down to you so report it promptly.
New homes and floors in Lochore
Many new homes in Scotland are timber-framed, so skirting and sealant joints can open up as the building settles.
For new homes near Lochgelly station, it’s worth checking the sealant early, while snags are still fresh.
Lochore is about 6 miles south-west of Glenrothes, in Fife. Across the KY5 area, we cover new build mastic for homes and businesses. 133 places in Fife are on our list. We also work in Edinburgh, around 15 miles away.
Postcode districts we cover here for new build mastic: KY5. New build mastic is available to properties on Scott Place, Loch Leven Terrace and Marmion Road. We also cover the places around Lochore: Crosshill (1 mile south), Ballingry (1 mile north), Glencraig (1 mile south), Lochgelly (2 miles south) and Lumphinnans (3 miles south). Further out, we also cover Dunfermline (7 miles south-west), Kirkcaldy (6 miles east), Glenrothes (6 miles north-east), Leven (13 miles east), Cowdenbeath (4 miles south) and Dysart (8 miles east).
Local landmarks in Lochore
The closest station to Lochore is Lochgelly station, roughly 1.6 miles south of the centre. A little further out are Lochore Castle (0.6 miles south) and Michael Bruce Cottage Museum (3.9 miles north). Green spaces nearby include Loch Gelly and Benarty Hill.
Common problems we fix in Lochore
New homes are full of moisture from plaster, screed and concrete, which takes a year or two to dry out. Drying timber shrinks and pulls joints apart, and sealant that cannot keep up splits.
Common reasons people contact us are:
- Sealant applied over dusty or wet surfaces
- Smeared, uneven beads picked up at snagging
- Cracked sealant around new window and door frames
- Cracked caulk along new skirting
Around Lochore, as everywhere, new build mastic is only as good as the preparation behind it.
Comparing quotes
- Which sealant they’ll use, and why
- How long to leave it before use
- How much experience the applicator has
- Whether they seal over old material or remove it
Should I try it myself first?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
When it isn’t the sealant
New sealant can’t fix everything, and we’d rather say so up front. It won’t solve:
- Structural cracks in walls or ceilings
- Broken tiles or a split tray
- Movement caused by a poorly fitted tray or bath
If in doubt, send an email to info@mrmastic.co.uk and we will say what we think before you book.
Where we work in Lochore
- Windows & doors
- Bathrooms & en suites
- Show homes
- Skirting & floors
- Plot handovers
- Kitchens
Why act early in Lochore
If you’re still in the builder’s snagging or warranty period, ask them to put it right first. If it’s slow, or the same joint keeps failing, a proper reseal from a specialist is the next step. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are unsure, email us at info@mrmastic.co.uk and we will give you an honest view and a quote.
Why book with us
- Arbo and Everbuild products
- ARBOMaster approved applicator
- Any old sealant cut out fully, not covered over
- A sealant colour to suit the surroundings
Take a look at what affects the cost and customer reviews.