Perth and Kinross · Scotland
New Build Mastic in Inchture
Plot mastic for developers and snagging failed sealant in new homes for homes and businesses in Inchture and across Perth and Kinross. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Internal frame sealant that has split
- New-build shower sealant that has already split
- Cracked caulk along new skirting
The process
Once we’re on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes anything from a few hours to several days, depending on the number of plots. For a place like Inchture, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We go through the snagging list or plot schedule and agree the joints to do.
- Failed or untidy sealant is cut out completely.
- We clean off dust from the build and prime the surfaces where the product needs it.
- New sealant suited to each joint is applied and tooled neatly.
- Each area is checked and left with its cure time.
Preparing for the visit
- Let us know if you’ve seen damp or leaks
- Keep pets and children clear of the area while we work
- Mention if the joints have been sealed before
Get a quote
Every job is quoted individually. Just email us at info@mrmastic.co.uk with the details.
Advice
New build mastic in Inchture
Dust is the enemy of new-build sealant. We clean every joint thoroughly and prime where the surface and product need it, so the new bead bonds properly rather than sitting on a layer of grit. Common call-outs are for sealant applied over dusty or wet surfaces and untidy sealant flagged on a snagging list, on kitchens, show homes and windows & doors.
Timber frame is common in newer Scottish homes, and it settles over the first years, which shows as gaps at skirtings and floor joints. Older stone-built homes, meanwhile, often have timber floors that move with the seasons.
All of our work is guaranteed for twelve months, in Inchture and everywhere else we cover.
- Where
- Inchture (PH14)
- Wider area
- Perth and Kinross
- Cover
- 12 months on all our work
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Landlords, agents and businesses in Inchture
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
We also work for property managers and facilities teams in Inchture and across Perth and Kinross. Several sites can go on one quote.
Aftercare tips
A little care helps the new joints last. We recommend:
- Wait for the cure time before using a resealed shower
- Clean sealant with mild detergent, not abrasives
- Don’t wait for the house to settle if water is getting through
- Report sealant problems to your builder during the snagging period
Keep the bathroom ventilated, especially in the first year. Use the extractor fan or open a window after showers.
Early snagging is easier snagging. Small faults turn into leaks if left in a busy bathroom.
Why act early in Inchture
A failed shower or bath seal in a new home lets water into floors and walls that are still drying out. Resealing promptly protects the new finishes around it. In a place like Inchture, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.
The cost depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before we start, so you know where you stand.
Why us?
- Old sealant always removed completely
- Quality sealants from Arbo and Everbuild
- Anti-fungal silicone where joints get wet
- Approved under the ARBOMaster scheme
Take a look at our cost guide and customer reviews.
FAQs for Inchture
I let a flat near Invergowrie station. Can you help?
Yes. We work for landlords and letting agents as well as homeowners. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we will give you a clear quote.
Is Inchture within the area you cover?
Yes, Inchture is covered. We work across all of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Where is Mr Mastic based?
Our base is Crawley. We work across South East England, London and Scotland.
Can you work on commercial sites?
Yes, regularly. Larger jobs can be planned room by room or area by area.
Do you hold any approvals?
Yes. We are an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
Can I add another job to the visit?
Yes, and it often makes sense. Doing several areas at once is usually more efficient, so mention them when you ask for a quote.
My new home is still under warranty. Should I contact you?
If you are still within the builder’s snagging or warranty period, report it to them first. If it is not sorted, or keeps failing, get in touch with us.
How much does new build mastic cost in Inchture?
It depends on the job, so we quote each one individually. To get one, drop us a line at info@mrmastic.co.uk and tell us what needs doing and where.
Different surfaces, different methods
Show homes
We seal show-home bathrooms, kitchens and frames ready for viewings. We’ll plan around viewing times.
Bathrooms and en suites
Trays and baths in new builds settle as they’re used. The joint is stripped back before the new bead goes in.
New homes and floors in Inchture
Inchture is close to the coast. Plot mastic on new homes near the coast takes more weather than it would inland, so it’s worth checking at snagging. Timber frame is common in newer Scottish homes, and as the frame dries and settles, skirting and sealant joints can open up.
For new homes near Invergowrie station, it’s worth checking the sealant early, while snags are still fresh.
Inchture is about 7 miles west of Dundee, in Perth and Kinross. Homes, rented property, offices and hotels in Inchture is covered for new build mastic, old or new, large or small. Every job comes with our 12-month guarantee. Inchture is one of 107 places in Perth and Kinross we cover for new build mastic. There’s also a page for Dundee, about 7 miles away.
Our applicators cover all of the PH14 postcode area for new build mastic and the streets around it. You’ll find streets such as Flower of Monorgan Close, Seggieden Close and Orchard Way, all of which we cover. Neighbouring places we cover for new build mastic include Longforgan (2 miles north-east), Grange (2 miles south), Kingoodie (4 miles east), Fowlis (4 miles north-east) and Errol (4 miles south-west). Further out, we also cover Perth (11 miles west), Blairgowrie and Rattray (12 miles north-west), Letham (12 miles west), Scone (9 miles west), Tulloch (12 miles west) and Alyth (13 miles north).
Local landmarks in Inchture
The nearest railway station is Invergowrie station, about 4.2 miles east of the centre. Other landmarks nearby include Moncur Castle (0.6 miles north) and Royal Dundee Liff Hospital (4.5 miles north-east). The countryside around Inchture includes Rossie Lake and Gask Hill.
What we are called out for in Inchture
The wrong product is sometimes used in the wrong place: decorators’ caulk in a wet area, or a stiff sealant where there’s movement. Neither lasts long.
The most common problems we see are:
- Leaking shower tray seals in a new home
- Gaps opening as the house dries out and settles
- Smeared, uneven beads picked up at snagging
- Sealant applied over dusty or wet surfaces
Around Inchture, as everywhere, new build mastic is only as good as the preparation behind it.
Before you book anyone
- Who does the work, and how experienced they are
- How the colour is chosen
- How the joint is cleaned and prepared
- Whether VAT is included
Also near Inchture
Also in Inchture
Can I do it myself?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.