Shetland Islands · Scotland
New Build Mastic in Huxter
Problem with your new-build sealant joints in Huxter? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Second-fix sealing on new plots
- Joints pulling apart as timber shrinks
- Kitchen sealant that has pulled off the wall
How the job changes by surface
Kitchens
Worktops in new homes can move slightly as the house dries, which opens gaps along the back. We reseal them with a flexible sealant.
Skirting and floors
Where the floor meets a bath panel or kitchen plinth, the joint keeps mop water out. They get a flexible, water-resistant sealant.
How we handle new build mastic in Huxter
Some owners wait for the first year’s movement before having joints redone. That makes sense for small gaps that are just cosmetic, but a seal that is letting water through needs doing now. Typical jobs include cracked sealant around new window and door frames and gaps behind new kitchen upstands, across windows & doors, skirting & floors and plot handovers.
Many newer homes in Scotland are timber-framed and settle as they dry out, so skirting and floor joints can open up. In older homes, timber floors move through the year too.
There’s a 12-month guarantee on every job.
- Place
- Huxter (ZE2)
- Region
- Shetland Islands
- Guarantee
- A year, on every job
- Quotes
- A clear price before work begins
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Other services in Huxter
What new build mastic looks like in Huxter
Huxter is close to the coast. Plot mastic on new homes near the coast takes more weather than it would inland, so any gaps are best picked up early. Island jobs need planning around ferries and the weather, so the more notice, the better.
Around Huxter, as everywhere, new build mastic is only as good as the preparation behind it.
Huxter is in the Shetland Islands. For new build mastic in and around Huxter, it’s easy to get a quote: please send an email to info@mrmastic.co.uk. We’re based in Crawley and cover the Shetland Islands, Huxter included. Huxter is one of 63 places in the Shetland Islands where we work for new build mastic.
Jobs for new build mastic in ZE2 is quoted and booked the same way as anywhere else. If you are just outside Huxter, we cover Symbister (1 mile west), Hamister (1 mile north-west), Sandwick (1 mile west), Clate (1 mile west) and Tripwell (1 mile north). Within a short drive, we also cover Lerwick (14 miles south-west), Sound (15 miles south-west) and Brae (13 miles west). For island and remote addresses, a little more planning is needed.
Around Huxter
For a walk, there’s Loch of Huxter and Ward of Clett.
How we quote for new build mastic
Call for a quick quote. The main things that affect it are:
- The number of rooms or windows
- The old material and how stubborn it is
- Which sealant suits the joint
- The size of the job
What it costs depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You will have a clear quote before any work starts.
What to tell us for a quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- A few pictures by email, if you can
- Where the property is
- Any previous sealing or DIY work
- The rough size of the job
If you’re in Huxter and need new build mastic, send an email to info@mrmastic.co.uk. Tell us what the problem is and where, and we will agree the price before any work begins.
Keeping the joints in good condition
Aftercare is simple, and it makes a real difference:
- Do not wait for the house to settle if water is getting through
- Report sealant problems to your builder during the snagging period
- Follow the cure time we give you
- Use the extractor fan every time you shower
Don’t stand on the bath edge or the lip of the tray while the sealant cures. Report any movement in a bath or tray.
Early snagging is easier snagging. Small faults turn into leaks if left.
Landlords, agents and businesses in Huxter
For anyone letting property in or around Huxter, several properties can go on one quote. Send us the addresses and the work at each, and pictures by email help.
We also work for property managers and facilities teams. We can quote a run of properties together.
Common problems we fix in Huxter
Sealant applied onto damp surfaces doesn’t bond well. On a busy site, joints are not always given time to dry.
Signs it’s time to call us include:
- Sealant applied over dusty or wet surfaces
- Shower seals failing in the first year or two
- Smeared, uneven beads picked up at snagging
- Cracked sealant around new window and door frames
For jobs in and around Huxter, choosing the right material for each joint is as important as a tidy finish.
Questions to ask before booking
- Is VAT in the price?
- What product goes in the joint
- How long the guarantee is
- Whether all the old sealant comes out first
FAQs for Huxter
Is Huxter in your area for new build mastic?
Yes. We work across all of Scotland, and Huxter is part of that. Just send an email to info@mrmastic.co.uk with a few details of the job, and we’ll give you a clear price.
Do you cover smaller places like Huxter?
Yes, we do. We work across all of Scotland, islands included, and smaller places are part of that. Longer journeys are simply planned in advance.
How long does the job take?
A typical job takes a few hours in a single home, including preparation and clearing up. Your quote will say how long we expect yours to take.
What should I tell you?
Only a few details: the address or postcode, what’s wrong and any access issues. After that, simply send an email to info@mrmastic.co.uk.
Can I add another job to the visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
What do you put in the joint?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We’ll tell you what we are using and why.
My new home is still under warranty. Should I contact you?
Your builder, if you’re still in their snagging or warranty period. If that doesn’t work out, we are happy to quote.
How long before the joint can be used?
Different products cure at different speeds, so follow the cure time we give you when we finish.
Honest limits
To be straight with you, there are a few things sealant won’t fix:
- Baths and trays that move too much for sealant to cope with
- Structural cracks in walls or ceilings
- Disputes or warranty claims with your builder
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we’ll tell you honestly.
What we seal
- Skirting & floors
- Bathrooms & en suites
- Plot handovers
- Windows & doors
- Show homes
- Kitchens
What happens on the day
You do not need to clear the whole room or building before we come, just the space around the work. We protect the rest, and the work takes anything from a few hours to several days, depending on the number of plots for a typical job. Around Huxter, distance and access matter more than parking. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- We look at why each joint failed, including any movement.
- Old sealant is cut out and the joints cleaned.
- We make sure the joints are dry and prime them if needed.
- New sealant goes in, with baths filled first so they’re at their heaviest.
- We check every joint and leave you with the cure times.
How to prepare
- Let us know about earlier repairs to the joints
- For indoor joints, keep the area dry beforehand if you can
- Mention any sign-in or site rules at work premises
How to get a quote
It all starts with a short chat. Describe the problem, the location and the size of the job. Whenever you’re ready, drop us a line at info@mrmastic.co.uk.