Kent · England
New Build Mastic in Hammill Park
Our applicators work in Hammill Park on plot mastic for developers and snagging failed sealant in new homes. Old sealant removed completely, joints prepared properly.
- Cracked sealant around new window and door frames
- Joints pulling apart as timber shrinks
- Sealant applied over dusty or wet surfaces
Landlord and commercial work in Hammill Park
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
New build mastic for homes and businesses in Hammill Park
Developers send us the plot schedule and we work through it. Bathrooms, en suites, kitchens, frames and skirting are sealed ready for handover with a sealant suited to each area. We work on bathrooms & en suites, plot handovers and skirting & floors, and the jobs we see most are sealant work across a run of new homes and gaps between new skirting and floors.
Somewhere as small as Hammill Park, new homes tend to be conversions, self-builds or a few houses rather than an estate. Every one needs its sealant and floor joints done properly, whatever the size of the site.
Your job is guaranteed for a year, as with all our work.
- Place
- Hammill Park (CT13)
- Wider area
- Kent
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
New build mastic in Hammill Park: local notes
Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
If you’ve bought a new home near Sandwich station, the sealant around baths, showers and frames is worth checking in the first year or two. In and around Hammill Park, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.
Hammill Park is about 5 miles north-west of Deal, in Kent. Jobs in Hammill Park get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Hammill Park is one of 922 places in Kent where we work. There’s also a page for Chelmsford, roughly 48 miles from Hammill Park.
All of CT13 is within our area for new build mastic, from the main roads to the quietest streets. That includes homes and businesses on Elizabeth Drive and Colliery Lane. We also cover Flemings (1 mile north), Heronden (1 mile south), Barnsole (1 mile north-west), Coombe (1 mile north) and Staple (1 mile north-west). We also work in nearby towns such as Canterbury (9 miles west), Margate (10 miles north-east), Dover (8 miles south), Folkestone (13 miles south-west), Ramsgate (8 miles north-east) and Broadstairs (10 miles north-east).
What’s near Hammill Park
Typical jobs here are in homes near Sandwich Technology School and the streets around them. For rail, the closest station is Sandwich station, about 2.7 miles north-east. A little further out are White Mill (2.6 miles north-east). Not far away are Monk's Wall nature reserve.
What affects the cost of new build mastic
Jobs vary more than people expect. What affects the quote:
- The number of rooms or windows
- The old material and how stubborn it is
- The number and length of the joints
- How easy the joints are to reach
Combining jobs into one visit normally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.
Asking for a quote
Before you ask for a quote, have a think about:
- The problem you’ve noticed
- Pictures of the joints, sent by email
- The address or postcode of the job
- Access, such as stairs, a lift or height
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will talk you through the work and give you a clear price.
Different surfaces, different methods
Skirting and floors
As timber and screed dry, skirting and floors shift. Caulk cracks; a flexible sealant moves with it.
Windows and doors
The gap between a new frame and its plaster reveal often opens up. We remove cracked sealant and apply a flexible one that suits the frame.
Common questions in Hammill Park
I let a flat near Sandwich station. Can you help?
Yes. We work for landlords and agents as well as homeowners. You can call 0345 464 0079 or send us an email with the details for a clear quote.
Is Hammill Park within the area you cover?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
When is the best time to reseal in a new build?
For failed seals that let water through, the best time is now. Cosmetic gaps can wait until the first year or two of movement has passed.
Does someone need to be in?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
Can you do several jobs on one visit?
Yes, we can. More than one area can go on one quote.
Where are you based?
Mr Mastic is based in Crawley. Our applicators cover Hammill Park, along with the rest of our area.
Can I send you my snagging list?
Yes. Send it with pictures and we’ll quote for the sealant items. Items that need a plumber, tiler or the builder are flagged.
How long will you be here?
Most jobs take a few hours in a single home, including the preparation. We’ll confirm how long when we quote.
Can I do it myself?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Leave it or put it right?
For developers, getting the sealant right first time saves return visits. Every return visit for a failed seal takes time. Where a wall is exposed, as many are in small places like Hammill Park, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
What it costs depends on how much there is to do, how hard the old material is to remove and access to the work. We give a clear quote before any work starts, so you know where you stand.
Why book with us
- Rated 4.9 stars on Google
- Any old sealant cut out fully, not covered over
- Tidy, careful work
- Sealant colour chosen to suit
Take a look at how sealant jobs are priced or customer reviews.
What sealant work can’t fix
Some problems need a builder, plumber or other trade rather than us:
- A tray or bath that isn’t properly supported, until it’s fixed
- Leaks from pipes, valves or wastes, which need a plumber
- Structural cracks in walls or ceilings
If you are not sure, just phone 0345 464 0079 or drop us an email and we’ll give you a straight answer before booking.
Where we work in Hammill Park
- Windows & doors
- Skirting & floors
- Show homes
- Plot handovers
- Bathrooms & en suites
- Kitchens
The process
A visit follows a simple pattern: we check the joints, protect the area around them, do the work and tidy away. It normally takes anything from a few hours to several days, depending on the number of plots. For a village or hamlet like Hammill Park, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Each joint is checked for movement before we start.
- Old sealant is cut out and the joints cleaned.
- Joints are dried and primed where the product calls for it.
- Baths are filled with water, then the new sealant is applied.
- We check every joint and leave you with the cure times.
Before we arrive
- For indoor joints, keep the area dry beforehand if you can
- Clear items away from the joints we’re working on
- Tell us about any previous sealing or DIY attempts
Ask for a quote
Getting a quote is simple: tell us what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand, and we’ll take it from there.