Hampshire · England

New Build Mastic in Fisher's Pond

Plot mastic for developers and snagging failed sealant in new homes for householders, landlords and businesses in Fisher's Pond. ARBOMaster approved applicators, fully insured, with a one-year guarantee.

  • Smeared, uneven beads picked up at snagging
  • Sealant work across a run of new homes
  • Cracked sealant around new window and door frames

New build mastic for Fisher's Pond homes and businesses

Landlord and commercial work in Fisher's Pond

If you manage several properties in or around Fisher's Pond, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs, and pictures by email help.

We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.

How we handle new build mastic in Fisher's Pond

For builders and developers, we work through plots to the schedule you give us. We seal bathrooms, kitchens, windows, doors and skirting so plots are ready to hand over with a sealant suited to each area. If you have sealant applied over dusty or wet surfaces and messy sealant that spoils new finishes, we can help, on plot handovers, skirting & floors and windows & doors alike.

In a village or hamlet like Fisher's Pond, new homes are more likely to be a barn conversion or a handful of houses than a big estate. Every one needs its sealant and floor joints done properly, whatever the size of the site.

All of our work is guaranteed for twelve months.

Fresh white silicone going into the corner where a shower screen meets the tiled wall
Place
Fisher's Pond (SO50)
Wider area
Hampshire
Guarantee
A year, on every job
Price
A clear quote up front
Phone
0345 464 0079
Updated
26 October 2026

How to look after the new joints

Once the sealant has cured, a few habits help it last:

  • Keep photos and emails about snagging items
  • Act quickly if a seal starts to leak
  • Keep water off fresh sealant until it has cured
  • Avoid scourers and strong chemicals on sealant

Clean the sealant with a mild detergent and a soft cloth. Avoid abrasive pads and strong solvents as they wear the bead.

Leave a failed new-build seal and water can reach the floor and the ceiling below. Early resealing keeps the job small and protects the rest of the house.

New build mastic around Fisher's Pond

Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.

If you’ve bought a new home near Eastleigh station, the sealant around baths, showers and frames is worth checking in the first year or two. In and around Fisher's Pond, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.

Fisher's Pond is about 2 miles north-east of Eastleigh, in Hampshire. Fisher's Pond gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Across Hampshire, we cover 683 places, Fisher's Pond among them. Southampton is on our list too, around 6 miles away.

Work in SO50 is quoted and booked the same way as anywhere else. Close by, we work in Nob's Crook (1 mile north-west), Crowdhill (1 mile south), Colden Common (1 mile north-west), Brambridge (1 mile north-west) and Lord's Wood (1 mile west). We also work in nearby towns such as Winchester (5 miles north), Gosport (14 miles south-east), Fareham (10 miles south-east), Horndean (14 miles south-east), Totton (10 miles south-west) and Chandler's Ford (4 miles west).

Landmarks near Fisher's Pond

In Fisher's Pond, that means homes and buildings near Wyvern Technology College and The Fox & Hounds pub and the streets around them. For rail, the closest station is Eastleigh station, roughly 2.3 miles south-west. A little further out are Moorgreen Hospital (4.1 miles south) and Eastleigh Museum (2.4 miles south-west). Open spaces near Fisher's Pond include Twyford Down and Shawford Down.

Map of Fisher's Pond © OpenStreetMap contributors

Why act early in Fisher's Pond

If you’re still in the builder’s snagging or warranty period, ask them to put it right first. If it keeps failing or isn’t dealt with, we can reseal it properly. Around Fisher's Pond, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.

Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we will go through it with you.

Why choose Mr Mastic in Fisher's Pond

  • Tidy, careful work
  • Colour picked to suit the job
  • ARBOMaster approved applicator
  • Trusted Arbo and Everbuild sealants

See our cost guide or our reviews.

Surface by surface

Plot handovers

Developers can send the plot schedule and specification and we will quote. We seal bathrooms, kitchens, frames and floors as agreed.

Skirting and floors

New homes often develop a gap between skirting and floor. We seal it with a flexible sealant that copes with the movement.

The process

Once we are on site, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes a few hours in a single home. In a small place like Fisher's Pond, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We look at why each joint failed, including any movement.
  2. We remove the failed sealant and clean the joints.
  3. Joints are dried and primed where the product calls for it.
  4. New sealant goes in, with baths filled first so they’re at their heaviest.
  5. We check every joint and leave you with the cure times.

How to prepare

  • Mention if the joints have been sealed before
  • Tell us if parking is tricky
  • Clear items away from the joints we’re working on

Getting a quote

Call for a quick quote, or email us if that is easier. Tell us about the joints that need doing and we’ll talk you through the work.

Get a price

Related advice

What we cannot put right

New sealant can’t fix everything, and we’d rather say so up front. It will not solve:

  • Damaged fittings that need replacing
  • Movement caused by a poorly fitted tray or bath
  • Settlement cracks that need a surveyor

If in doubt, ring 0345 464 0079 or send us an email and we will say what we think before booking.

What we seal

  • Windows & doors
  • Bathrooms & en suites
  • Show homes
  • Plot handovers
  • Skirting & floors
  • Kitchens

Questions from Fisher's Pond

I let a flat near Eastleigh station. Can you help?

Yes, we work for landlords and agents. Just phone 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear price.

Do you cover Fisher's Pond for new build mastic?

Yes. Our work covers London and the South East, and Fisher's Pond is part of that. Just call 0345 464 0079 or email us with a few details of the job, and we will send you a clear quote.

Is it worth trying it myself?

Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. If it doesn’t work out, we can redo it.

Will the old sealant be removed?

Yes, every time. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.

Why does sealant fail so quickly in new builds?

Lots of new homes see sealant crack early, because the house is drying and settling. Rushed application on dusty surfaces makes it worse.

What do you need from me for a quote?

A short description and the location, with pictures by email if possible. If we need more, we’ll ask.

Should I go to my builder first?

Your builder, if you’re still in their snagging or warranty period. After that, or if their repair keeps failing, we can do it and our work is guaranteed for a year.

What sealant do you use?

We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we’ll explain our choice.

DIY sealant or a professional job?

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.

Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job