Hampshire · England
Fisher's Pond Fire Rated Sealant
We cover Fisher's Pond for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly.
- Gaps flagged on a fire risk assessment
- Fire seals that have cracked with movement
- Unsealed gaps around fire door frames
Why it’s worth doing now in Fisher's Pond
Doing it once, properly, beats doing it twice. Work that does not follow the tested detail may have to come out again when the building is next checked. Older cottages and farmhouses around Fisher's Pond can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
The cost depends on the amount of work, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before any work starts, so you know where you stand.
Why choose Mr Mastic in Fisher's Pond
- We never seal over old sealant
- Every job guaranteed for a year
- 20+ years of sealant experience
- Domestic, commercial and hotel work
Read our cost guide or what customers say.
Fire rated sealant in Fisher's Pond
Fire-rated sealant closes the gaps around pipes, cables and frames where they pass through a fire-resisting wall or floor. We apply intumescent and fire-rated sealants to the manufacturer’s tested details for each gap. We work on service penetrations, linear gaps and door frames, and the jobs we see most are door frames with gaps between frame and wall and gaps around pipes and cables through fire-resisting walls.
For holiday lets, converted business premises or a community building near Fisher's Pond, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
We stand behind the work with a one-year guarantee, so you are not left on your own once the job is done.
- Place
- Fisher's Pond (SO50)
- Wider area
- Hampshire
- Cover
- One year on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
DIY versus a professional finish
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
Commercial buildings in Fisher's Pond
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Letting a property close to Eastleigh station? Then fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Community buildings like Church of the Holy Trinity are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Fisher's Pond is about 2 miles north-east of Eastleigh, in Hampshire. If you need fire rated sealant in Fisher's Pond, it’s easy to get a quote: please call 0345 464 0079 or drop us an email. We’re based in Crawley and cover Hampshire. Our Hampshire coverage runs to 683 places, and Fisher's Pond is one of them. We also work in Southampton, about 6 miles from Fisher's Pond.
Postcode districts we cover here for fire rated sealant: SO50. We also cover the places around Fisher's Pond: Nob's Crook (1 mile north-west), Crowdhill (1 mile south), Colden Common (1 mile north-west), Brambridge (1 mile north-west) and Lord's Wood (1 mile west). We also work in nearby towns such as Winchester (5 miles north), Gosport (14 miles south-east), Fareham (10 miles south-east), Horndean (14 miles south-east), Totton (10 miles south-west) and Chandler's Ford (4 miles west).
What’s near Fisher's Pond
Locally, jobs take us to homes and businesses close to Wyvern Technology College and The Fox & Hounds pub, among other places. The closest station to Fisher's Pond is Eastleigh station, about 2.3 miles south-west. Well-known places in the area include Moorgreen Hospital (4.1 miles south) and Eastleigh Museum (2.4 miles south-west). Green spaces nearby include Twyford Down and Shawford Down.
Questions from Fisher's Pond
Do you cover Fisher's Pond for fire rated sealant?
Yes. We work across London and the South East, and Fisher's Pond is part of that. You can call 0345 464 0079 or send us an email and let us know what needs doing, and we will send you a clear quote.
I let a flat near Eastleigh station. Can you help?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before any work starts.
Will the old sealant be removed?
Always. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Can you tell me how many minutes the seal will last?
We do not give ratings or certificates for our work. The requirement comes from your assessor, designer or building control, and we fit a product whose tested details meet it.
What information do you need?
Just the basics: where it is, what you’ve noticed and how we reach it. After that, simply phone 0345 464 0079 or drop us an email.
Is standard sealant good enough for a fire gap?
No. Ordinary silicone, caulk or foam is not tested as fire stopping. If it’s been used, we remove it and use the right product.
What does fire rated sealant cost?
It depends on the job, so we quote each one individually. To get one, phone 0345 464 0079 or drop us an email and let us know what needs doing and where.
Are you fully insured?
Yes. Mr Mastic is fully insured, and we’ve been doing sealant work for more than 20 years.
Landlords, agents and businesses in Fisher's Pond
In hotels, rooms out of use cost money, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.
For anyone letting property in or around Fisher's Pond, several properties can be quoted together. Just tell us the addresses and what each one needs.
The process
Once we are on site, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes a few hours for a handful of gaps, and longer for a whole building. In a small place like Fisher's Pond, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- Where the tested detail needs backing or fill, we fit it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Locations and products are noted so you have them on file.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Plan for the work area to be out of bounds to pets and children
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
We do not publish a price list, because every job is different. Instead, we give you a clear price for your job. To get started, call 0345 464 0079 or send us an email.
Advice
Towns and villages near Fisher's Pond
Other services in Fisher's Pond
Signs you need fire rated sealant in Fisher's Pond
Gaps also open up as buildings move: cracked or debonded sealant leaves an open route through the wall. Damage from cleaning, knocks and maintenance adds to it.
These are the problems we are asked about most:
- Fire stopping disturbed by later work
- Joints picked up in a fire-stopping survey
- Fire seals that have cracked with movement
- Gaps left after a refit or conversion
For site and facilities teams at buildings such as Colden Common Primary School, service openings in fire-resisting walls need checking after any refurbishment.
What your quote should include
- How long the guarantee is
- How much experience the applicator has
- Is VAT in the price?
- What insurance they hold
Aftercare tips
Good habits help new joints last longer. Our tips:
- Look in service cupboards and ceiling voids from time to time
- Photograph sealed gaps before they’re covered up
- Include fire stopping when you schedule refits
- Keep general-purpose foam and caulk away from fire-stopping gaps
Look at the sealed gaps as part of your routine walk-rounds. Watch for cracking, gaps or seals that have been disturbed and get them seen to.
Open gaps do not only matter in a fire: noise, draughts and even pests can come through too. Sealing them early helps on every front.
What affects the cost of fire rated sealant
We don’t publish a price list. The quote depends on:
- Which sealant suits the joint
- How much there is to do
- How easy the joints are to reach
- When we can work, for business premises
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
What to tell us for a quote
Photos help, but a description is a good start. Try to tell us:
- The type of property
- Access, such as stairs, a lift or height
- How many joints, rooms or windows are involved
- Photos by email, if that is easy
Asking for a quote is easy: let us know the job and the location. A few photos by email make the job easier to understand.