Surrey · England
New Build Mastic in Burwood Park
Professional new build mastic in and around Burwood Park, with every bit of old sealant taken out first.
- New-build shower sealant that has already split
- Cracked sealant around new window and door frames
- Gaps behind new kitchen upstands
New build mastic for homes and businesses in Burwood Park
We carry out plot mastic and second-fix sealing for builders, and snagging reseals for new-home owners. In both, preparation makes the difference since hurried prep is behind a lot of new-build failures. We work on bathrooms & en suites, skirting & floors and plot handovers, and common reasons people get in touch are internal frame sealant that has split and sealant work across a run of new homes.
Around Burwood Park, older homes often have timber floors that move through the year, which is why skirting and threshold joints need a flexible sealant, not filler.
The work is covered for a year after we finish. If anything is not right with it, ring 0345 464 0079 or drop us an email.
- Location
- Burwood Park (KT12, KT13)
- Wider area
- Surrey
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Common questions in Burwood Park
Do you work for landlords with property near Walton-On-Thames station?
Yes, we work for letting agents and landlords. Just ring 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear price.
Do you cover Burwood Park for new build mastic?
Yes, Burwood Park is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or send us an email and tell us what needs doing, and we will send you a clear quote.
How long should I leave it?
Different products cure at different speeds, so follow the cure time we give you when we finish.
Can I send you my snagging list?
Yes. Send it with photos and we’ll quote for the sealant items. If something isn’t sealant, we’ll say so.
Can you work on commercial sites?
Yes. Commercial and hotel work is a large part of what we do. Working times can be discussed when we quote.
Why has my new-build shower seal failed already?
It’s common, and there are usually two reasons: the house moving as it dries, and sealant that never bonded properly. A proper reseal deals with both.
Can you reseal over the builder’s sealant?
No. Sealing over old sealant looks fine for a few weeks, then lifts. All the old sealant comes out before any work starts.
Is there a guarantee?
Yes. Each job is guaranteed for twelve months, large or small.
Towns and villages near Burwood Park
Other services in Burwood Park
When something else is needed
Before you book, it’s worth knowing the limits:
- Broken tiles or a split tray
- Your warranty claim itself, which is between you and the builder
- Movement caused by a poorly fitted tray or bath
Not sure which it is? You can phone 0345 464 0079 or email us and we’ll tell you honestly.
What we seal
- Skirting & floors
- Windows & doors
- Plot handovers
- Bathrooms & en suites
- Kitchens
- Show homes
What we’re called out for in Burwood Park
A new house holds a lot of water from the build, and it dries out over the first couple of years. As it does, timber shrinks and joints open and the sealant has to cope with the movement.
Keep an eye out for any of the following:
- Gaps behind new kitchen upstands
- Beads laid onto grit and dust from the build
- Skirting joints opening in the first winter
- Sealant work across a run of new homes
If you’ve bought a new home near Walton-On-Thames station, the sealant around baths, showers and frames is worth checking in the first year or two.
What your quote should include
- What insurance they hold
- What product goes in the joint
- Whether you can choose the colour
- Whether all the old sealant comes out first
What happens on the day
Good joint work is mostly preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it generally takes anything from a few hours to several days, depending on the number of plots. For a village or hamlet like Burwood Park, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We start by going through the snagging items or plot schedule with you.
- Every bit of the old builder’s sealant is cut out down to clean surfaces.
- Joints are vacuumed and cleaned of building dust.
- We prime where needed and apply a sealant suited to each joint.
- Each bead is tooled and the cure times explained.
How to prepare
- Move anything stored near the joints
- Mention if the joints have been sealed before
- Plan for the work area to be out of bounds to pets and children
Getting a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
Related advice
What happens if it’s left?
A failed shower or bath seal in a new home lets water into floors and walls that are still drying out. Dealing with it early keeps the damage away from ceilings, floors and finishes. Where a wall is exposed, as many are in small places like Burwood Park, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Doing several joints on one visit usually makes better use of the time than several visits. You will get one clear quote for the whole job.
What you get with us
- ARBOMaster approved applicator
- Anti-fungal silicone where joints get wet
- Over 20 years’ experience
- Colour picked to suit the job
Looking after it afterwards
Looking after new joints is easy:
- Open a window or run the fan after bathing
- Check bath and shower seals every few months as the house settles
- Report sealant problems to your builder during the snagging period
- Record problems with dated photos
Clean the sealant with a mild detergent and a soft cloth. Keep scourers and harsh chemicals off it as they wear the bead.
Report failed sealant to the builder while you’re in the snagging period. After that, putting it right may fall to you, so raise it early.
Joints and finishes in Burwood Park homes
Compared with the north and west, the South East gets less rain, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
In and around Burwood Park, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.
Burwood Park is about 1 mile south-east of Weybridge, in Surrey. Burwood Park gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Across Surrey, we cover 395 places, and Burwood Park is one of them. We also work in London, around 17 miles away.
Here we cover the KT12 and KT13 postcode area for new build mastic. Streets in the area include Chargate Close, Manor House Drive and Eriswell Road, and we cover them all. Burwood Park is on the B365, which makes it straightforward to reach with everything needed for new build mastic. Other places close to Burwood Park include Whiteley Village (1 mile south), St George's Hill (1 mile west), Hersham (1 mile north-east), Weybridge (1 mile north-west) and Walton-on-Thames (2 miles north-east). Within a short drive, we also cover Guildford (10 miles south-west), Woking (7 miles south-west), Camberley (13 miles west), Epsom (7 miles east), Redhill (14 miles south-east) and Ewell (7 miles east).
Landmarks near Burwood Park
In Burwood Park, that means homes and buildings near ACS International Schools, RES Sixth Form College and West End Common, among other places. The nearest railway station is Walton-On-Thames station, about 0.8 miles north-east. Nearby you’ll also find Elmbridge Museum (2.7 miles east) and No. 2 New Zealand General Hospital (1.6 miles north). For a walk, there’s Kempton Park Reservoirs and Claremont Lake.
Work for landlords, hotels and businesses
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we’ll give you a quote.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
What affects the cost of new build mastic
We quote each job individually. These are the things that affect it:
- The number of rooms or windows
- How much there is to do
- Access and height
- Any working-time requirements on site
Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you’re not sure whether it needs doing, call 0345 464 0079 or send us an email and we will give you an honest view and a quote.
What to tell us for a quote
What to tell us when you ask for a quote:
- If someone has resealed it before
- The rough size of the job
- The type of property
- Where the property is
To get a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We will give you a clear price before any work starts.