Hampshire · England

New Build Mastic in Anthill Common

New build mastic in Anthill Common from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.

  • Gaps opening as the house dries out and settles
  • New-build shower sealant that has already split
  • Kitchen sealant that has pulled off the wall

Need new build mastic in Anthill Common?

New build mastic in Anthill Common

New homes move as they dry out. Timber shrinks, plaster dries and baths and trays bed down, so sealant that was laid quickly before handover often cracks. We’re often asked to deal with smeared, uneven beads picked up at snagging and plot mastic for developers ahead of handover, on skirting & floors, show homes and kitchens.

Work in a small place like Anthill Common just needs the journey and access planning, and the work itself is the same as on any site.

The work is covered for a year after we finish. If there’s a problem with it, please call 0345 464 0079 or email us.

Close-up of hands using a sealant gun on the joint between a glass shower screen and tiles
Location
Anthill Common (PO7)
Region
Hampshire
Guarantee
One year on every job
Price
A clear quote up front
Call
0345 464 0079
Page updated
26 October 2026

Landlords, agents and businesses in Anthill Common

A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.

In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.

What sealant work cannot fix

Sealant isn’t the answer to every problem, and we’d rather say so up front. Sealant will not put right:

  • Damaged fittings that need replacing
  • Disputes or warranty claims with your builder
  • Baths and trays that move too much for sealant to cope with

Not sure which it is? You can ring 0345 464 0079 or drop us an email and we’ll tell you honestly.

Joints and surfaces we work on

  • Kitchens
  • Skirting & floors
  • Plot handovers
  • Bathrooms & en suites
  • Show homes
  • Windows & doors

Signs you need new build mastic in Anthill Common

If plaster or screed was still damp when it was sealed, the bond suffers. Site programmes do not always leave time for joints to dry before the sealant goes on.

Common reasons people contact us are:

  • Beads laid onto grit and dust from the build
  • Skirting joints opening in the first winter
  • Smeared, uneven beads picked up at snagging
  • Shower seals failing in the first year or two

Around Anthill Common, as everywhere, new build mastic is only as good as the preparation behind it.

What your quote should include

  • What product goes in the joint
  • Whether you can choose the colour
  • What happens if they find a problem under the old sealant
  • The length of the guarantee

Choosing a sealant specialist

Quotes for new build mastic in Anthill Common

The quote reflects the job in front of us. We take into account:

  • Access and height
  • The old material and how stubborn it is
  • Any working-time requirements on site
  • Whether there’s mould to deal with

Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs, plus any working-time requirements on site. Call for a quick quote and we’ll explain what it covers.

Helping us quote

Before you ask for a quote, have a think about:

  • Access, such as stairs, a lift or height
  • Pictures of the joints, sent by email
  • The problem you’ve noticed
  • The address or postcode of the job

Want a quote for new build mastic? Please ring 0345 464 0079 or send us an email with a few details. You will know what we plan to do, and what it will cost, before any work begins.

FAQs for Anthill Common

Do you cover smaller places like Anthill Common?

Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.

I let a flat near Portchester station. Can you help?

Yes, we work for landlords and agents. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we’ll give you a clear price.

Will you leave a mess?

We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.

Do you work through snagging lists?

Yes. Send us the sealant items on the list, with photos if you can. We’ll tell you if anything on it is not a sealant job.

Should I wait before resealing?

For failed seals that let water through, the best time is now. For small cosmetic gaps, waiting until the house has settled can save doing them twice.

Do you do commercial work?

Yes. Commercial and hotel work is a large part of what we do, as well as homes. Working times can be discussed when we quote.

Do you hold any approvals?

Yes. Mr Mastic is an ARBOMaster approved applicator.

Can you do several jobs on one visit?

Yes. Several rooms, windows or areas can go on one quote.

New build mastic around Anthill Common

Rainfall in the South East is lower than in much of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.

For new homes near Portchester station, it’s worth checking the sealant early, while snags are still fresh.

Anthill Common is about 3 miles north-west of Waterlooville, in Hampshire. For new build mastic in and around Anthill Common, it’s easy to get a quote: please ring 0345 464 0079 or drop us an email. We are based in Crawley and cover Hampshire. 683 places in Hampshire are on our list. You can also see our page for Portsmouth, roughly 7 miles from Anthill Common.

Here we cover the PO7 postcode area for new build mastic. You’ll find streets such as Broad Lane, School Lane and Uplands Road, all of which we cover. If you are just outside Anthill Common, we cover Denmead (1 mile south-east), Hambledon (1 mile north), Anmore (2 miles east), Wecock Farm (2 miles east) and Lovedean (3 miles east). We also work in nearby towns such as Winchester (14 miles north-west), Gosport (8 miles south), Havant (5 miles south-east), Eastleigh (12 miles west), Fareham (6 miles south-west) and Chandler's Ford (14 miles west).

Near you in Anthill Common

We work in homes and buildings around Fox and Hounds pub. The nearest railway station is Portchester station, about 4.6 miles south of the centre. Well-known places in the area include Queen Alexandra Hospital (4.2 miles south). Not far away are St Clair's Meadow and Portsdown Hill.

Map of Anthill Common © OpenStreetMap contributors

How it works

Good joint work is mostly preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it generally takes a few hours in a single home. For a village or hamlet like Anthill Common, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. We start by going through the snagging items or plot schedule with you.
  2. The failed sealant is removed completely down to clean surfaces.
  3. We clean out the dust and grit left from the build.
  4. Primer goes on where the surface and product need it, then the new sealant.
  5. Each bead is tooled and the cure times explained.

Getting ready for the visit

  • Clear items away from the joints we’re working on
  • For indoor joints, keep the area dry beforehand if you can
  • Tell us about access, such as stairs, a lift or high-level joints

Get a quote

Asking for a quote is easy: tell us what needs doing and where. A few photos by email make the job easier to understand, and we will take it from there.

Get a quick quote

Advice

Should I try it myself first?

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.

If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.

Surface by surface

Bathrooms and en suites

En suite showers are a common source of leaks into the room below. Resealing properly keeps water where it belongs.

Windows and doors

A draught at a new window can be a missed or failed joint. We check and reseal the frame edges.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job