Na h-Eileanan Siar · Scotland
New-build mastic & snagging in Aird, Na h-Eileanan Siar
New-build sealant joints in Aird need attention? We remove the old material, prepare the joints and seal them properly.
- Cracked sealant around new window and door frames
- Skirting joints opening in the first winter
- Leaking shower tray seals in a new home
New build mastic in Aird, done properly
A new house keeps drying out and settling for its first couple of years. Timber shrinks, plaster dries and baths and trays bed down, so sealant that was laid quickly before handover often cracks. We’re often asked to deal with untidy sealant flagged on a snagging list and beads laid onto grit and dust from the build, across show homes, plot handovers and skirting & floors.
Timber frame is common in newer Scottish homes, and it settles over the first years, so skirting and floor joints can open up. In older homes, timber floors move through the year too.
We guarantee the work for a year. If something is not right with it in that time, tell us and we’ll put it right.
- Location
- Aird (HS2)
- Region
- Na h-Eileanan Siar
- Guarantee
- One year on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What new build mastic looks like in Aird
Aird is close to the coast. Plot mastic on new homes near the coast takes more weather than it would inland, so any gaps are best picked up early. Many new homes in Scotland are timber-framed, and as the frame dries and settles, skirting and sealant joints can open up.
Around Aird, as everywhere, new build mastic is only as good as the preparation behind it.
Aird is in Na h-Eileanan Siar. For new build mastic in and around Aird, please send an email to info@mrmastic.co.uk for a quick quote. We’re based in Crawley and cover Na h-Eileanan Siar. Our area takes in 87 places across Na h-Eileanan Siar, large and small.
Work in HS2 is quoted and booked the same way as anywhere else. Local streets include Barraid Mhicsuain and Slighe Mhicsuain, all of which we cover. We also cover the places around Aird: Portvoller (1 mile north-east), Port Mholair (1 mile north-east), Shulishader (1 mile west), Sulaisiadar (2 miles south-west) and Garrabost (3 miles south-west). For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.
Near you in Aird
The countryside around Aird includes Loch an Tiumpan.
When to call us in Aird
The wrong product is sometimes used in the wrong place: caulk where water collects, or a rigid product on a moving joint. Neither lasts long.
Any of these means the joints need attention:
- Sealant work across a run of new homes
- Cracks appearing as a new home settles
- Shower seals failing in the first year or two
- Beads laid onto grit and dust from the build
For jobs in and around Aird, choosing the right material for each joint is as important as a tidy finish.
What to look for in a quote
- What guarantee comes with the work
- What happens if the job turns out different
- How the joint is cleaned and prepared
- Which sealant they’ll use, and why
What else we do in Aird
What happens if it’s left?
Resealing everything on a snagging list in one visit is normally simpler than chasing joints one at a time. It’s one visit, one quote and one set of cure times for the lot. Around Aird, water from a failed joint in an older stone home can soak into timber and plaster.
The cost reflects the work involved, not a rough estimate. That’s why we ask a few questions first and agree the price before starting.
Why Aird clients choose us
- A choice of colours where the product allows
- An ARBOMaster approved applicator
- Quality sealants from Arbo and Everbuild
- Neat joints and a tidy finish
See our cost guide or customer reviews.
Quotes for new build mastic in Aird
Every job gets its own quote. These are the things that affect it:
- The amount of work
- Which sealant suits the joint
- Working hours on commercial sites
- Whether there’s mould to deal with
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What we need to know
What to tell us when you ask for a quote:
- What the problem is, such as mould, gaps, leaks or cracking
- Any access issues, like height or stairs
- If someone has resealed it before
- Whether it’s a home or a business
Every job is quoted individually, so start by telling us what you need. Just email us at info@mrmastic.co.uk with the details and send photos if you have them.
Aftercare tips
Good habits help new joints last longer. Our tips:
- Do not wait for the house to settle if water is getting through
- Record problems with dated pictures
- Clean sealant with mild detergent, not abrasives
- Wait for the cure time before using a resealed shower
Follow the cure time we give you before the area gets wet. Most silicones need around a day to cure enough for use.
A seal that splits early is often a sign of movement. Getting it resealed properly, and any movement checked, stops it recurring.
FAQs for Aird
Can you do new build mastic in Aird?
Yes, Aird is within the area we cover. Our work covers the whole of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job.
Will you come out to Aird?
Yes, Aird is covered. Our work covers the whole of Scotland, islands included, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Are you ARBOMaster approved?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Are you insured?
Yes. We’re fully insured for domestic and commercial work.
Which products do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we’ll explain our choice.
Do you guarantee your work?
Yes. Every job comes with our 12-month guarantee.
Do the sealants smell?
Sometimes, a little. Any smell clears as the sealant cures.
Is it normal for sealant to crack in a new home?
A new house dries and settles for a year or two, and sealant is often rushed onto dusty, unprimed surfaces. Either can make it fail early.
When it isn’t the sealant
We’d rather tell you now than do work that won’t last, so here’s what sealant cannot put right:
- Settlement cracks that need a surveyor
- Movement caused by a poorly fitted tray or bath
- Disputes or warranty claims with your builder
If in doubt, send an email to info@mrmastic.co.uk and we will say what we think.
Surfaces we seal
- Kitchens
- Bathrooms & en suites
- Plot handovers
- Skirting & floors
- Windows & doors
- Show homes
What the job involves on each surface
Skirting and floors
Where the floor meets a bath panel or kitchen plinth, the joint keeps mop water out. They get a flexible, water-resistant sealant.
Windows and doors
On new builds, external frame sealant can be patchy. It’s resealed with an exterior sealant suited to the frame and wall.
The process
Most of a good job is in the preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it generally takes a few hours in a single home. For a place like Aird, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First we work through your snagging list or plot schedule with you.
- The old bead comes out in full, with no layer left behind.
- Surfaces are cleaned of building dust and primed where needed.
- New sealant suited to each joint is applied and tooled neatly.
- Finally, each room is checked and you are given the cure time.
Preparing for the visit
- For business premises, tell us about site rules or sign-in
- Where the joints are inside, avoid wetting them before we arrive
- Let us know about stairs, lifts or work at height
Get a quote
If you’re in Aird and need new build mastic, send an email to info@mrmastic.co.uk. Tell us what the problem is and where, and you will get a clear quote before we start.