Kent · England
New Build Mastic in Acol
Problem with your new-build sealant joints in Acol? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Sealant work across a run of new homes
- Shower seals failing in the first year or two
- Gaps between new skirting and floors
About our new build mastic in Acol
A new build should have a neat, sound bead at every joint. Smeared, patchy or cracked sealant is worth sorting early, before water gets into the floor or walls. We work on show homes, kitchens and bathrooms & en suites, and the jobs we see most are joints pulling apart as timber shrinks and second-fix sealing on new plots.
Older homes in small places like Acol often have timber floors that move with the seasons, which is why skirting and threshold joints need a flexible sealant, not filler.
All of our work is guaranteed for twelve months, in Acol and everywhere else we cover.
- Location
- Acol (CT7)
- Region
- Kent
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Joints and finishes in Acol homes
Acol is within about 2 miles of the coast. Plot mastic on new homes near the coast takes more weather than it would inland, so any gaps are best picked up early. Rainfall in the South East is lower than in much of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
If you’ve bought a new home near Birchington-On-Sea station, the sealant around baths, showers and frames is worth checking in the first year or two.
Acol is about 4 miles south-west of Margate, in Kent. For new build mastic in and around Acol, please ring 0345 464 0079 or email us for a quick quote. We cover Kent from our Crawley base. Our Kent coverage runs to 922 places, Acol among them. There’s also a page for Chelmsford, about 44 miles away.
Our applicators cover all of the CT7 postcode area for new build mastic and the streets around it. If you need new build mastic at a property on The Street, Dilnot Lane and Margate Hill or a nearby road, our applicators can take on the job. We also cover Mount Pleasant (1 mile south), Birchington (1 mile north), Way (1 mile south-east), Minster (2 miles south) and Westgate-on-Sea (2 miles north-east). Within a short drive, we also cover Canterbury (11 miles south-west), Margate (4 miles north-east), Dover (15 miles south), Ramsgate (4 miles east), Broadstairs (5 miles east) and Whitstable (12 miles west).
What’s near Acol
Around Acol, our work takes us to homes and buildings near King Ethelbert School and Crown & Sceptre pub and the streets around them. For rail, the closest station is Birchington-On-Sea station, roughly 1.5 miles north. Nearby you will also find Queen Elizabeth the Queen Mother Hospital (3.6 miles north-east) and Powell-Cotton Museum (0.7 miles north). Open spaces near Acol include Sandwich and Pegwell Bay.
How the job changes by surface
Bathrooms and en suites
Trays and baths in new builds settle as they’re used. The joint is stripped back before the new bead goes in and baths are filled before sealing.
Plot handovers
We work through plots to your schedule, sealing each room ready for handover. Joints are prepared properly before sealing.
Nearby places to Acol
More services for Acol
Do you need new build mastic in Acol?
Sealant applied onto damp surfaces does not bond well. Site programmes don’t always leave time for joints to dry before the sealant goes on.
The problems people generally mention when they call are:
- Gaps between new skirting and floors
- Kitchen sealant that has pulled off the wall
- New-build shower sealant that has already split
- Smeared, uneven beads picked up at snagging
In and around Acol, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.
Questions to ask before you book
- Which colour the sealant will be
- What happens if they find a problem under the old sealant
- What product goes in the joint
- How the joint is cleaned and prepared
Why act early in Acol
For developers, getting the sealant right first time saves return visits. Snagging visits for failed sealant cost time on every plot, and they’re avoidable with good preparation. Where a wall is exposed, as many are in small places like Acol, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Call for a quick quote and we will go through it with you.
Why book with us
- Any old sealant cut out fully, not covered over
- We leave the area clean and tidy
- Every job guaranteed for a year
- White, clear, grey or another colour, product permitting
Should I try it myself first?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so just mention it when you contact us.
What we cannot put right
Before booking, it’s worth knowing the limits too:
- Deciding who is responsible under a builder’s warranty
- Baths and trays that move too much for sealant to cope with
- Cracking that points to a structural problem
If in doubt, call 0345 464 0079 or send us an email and we’ll say what we think.
Surfaces we seal
- Kitchens
- Show homes
- Bathrooms & en suites
- Windows & doors
- Plot handovers
- Skirting & floors
The process
Most of a good job is in the preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes anything from a few hours to several days, depending on the number of plots. In a small place like Acol, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we work through your snagging list or plot schedule with you.
- We cut out every bit of the failed or messy sealant.
- We clean off dust from the build and prime the surfaces where the product needs it.
- We apply a sealant that suits each joint and tool it to a neat finish.
- Each area is checked and left with its cure time.
Before we arrive
- Let us know about earlier repairs to the joints
- Plan for the work area to be out of bounds to pets and children
- Tell us about access, such as stairs, a lift or high-level joints
How to get a quote
If you’re in Acol and need new build mastic, call 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and you will get a clear quote before any work starts.
Read more
Work for landlords, hotels and businesses
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Acol questions
I let a flat near Birchington-On-Sea station. Can you help?
Yes, landlords and agents are among the people we work for. You can call 0345 464 0079 or send us an email with the details for a clear quote.
Will you come out to Acol?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Are you fully insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
What sealant do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
What colour sealant will you use?
It depends on the joint: white or clear in most bathrooms, and a colour to suit worktops, frames and floors elsewhere. We agree the colour before any work starts.
Can you quote for more than one area?
Yes, and it often makes sense. Combining jobs makes good use of the visit.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator, and we are fully insured.
What information do you need?
Only a few details: where it is, what you’ve noticed and how we reach it. Then call 0345 464 0079 or send us an email.