Kent · England

Westgate-on-Sea Gutter Sealing

Gutter sealing across Westgate-on-Sea and nearby, with old sealant always removed completely.

  • Old sealant on roofline trims that has split
  • Fascia boards with gaps between them
  • Earlier gutter repairs that have peeled off

Gutter sealing for Westgate-on-Sea homes and businesses

About our gutter sealing in Westgate-on-Sea

Open fascia and soffit joints spoil the roofline and can let weather in. We seal them in a colour to suit where possible. We are often asked to deal with internal damp traced to a gutter joint and end caps that drip every time it rains, on soffit joints, garage door frames and roofline trims.

In a smaller place like Westgate-on-Sea, some homes face open ground, and walls and rooflines facing the weather take the worst of it. Joints on those sides are normally the first to go.

A 12-month guarantee comes as standard, so you’re not left on your own once the job is done.

Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house
Place
Westgate-on-Sea (CT8, CT9, CT7)
Wider area
Kent
Guarantee
One year on every job
Quote
A clear price before work begins
Phone
0345 464 0079
Updated
26 October 2026

Landlords, agents and businesses in Westgate-on-Sea

Landlords and letting agents in Westgate-on-Sea can book us as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order.

A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.

What we do, step by step

Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes anything from an hour or two to a few hours. For a job in Westgate-on-Sea, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.

  1. First we trace the drip and check the gutter is not damaged.
  2. The old sealant and dirt are cleaned out of the joint.
  3. The joint is dried before sealing.
  4. A gutter sealant is applied to the joint.
  5. The gutter is checked and debris around the joints cleared.

Before we arrive

  • Mention any sign-in or site rules at work premises
  • Tell us about access, such as stairs, a lift or high-level joints
  • Plan for the work area to be out of bounds to pets and children

Ask for a quote

To get a quote, phone 0345 464 0079 or email us with the location and a short description of the problem. We’ll send you a clear quote before any work starts.

Get a price

Related advice

Looking after it afterwards

How long the joints last depends on use and care. Here’s what we suggest:

  • Check the gutters during heavy rain
  • Look along the fascias for open joints
  • Watch the wall under the gutters for staining
  • Get a dropping gutter looked at quickly

Keep downpipes clear so the gutter can drain. Blockages push water back along the gutter.

Rain getting in round a garage door frame can damage what’s stored inside. A reseal sorts it while the frame is sound.

Different surfaces, different methods

Gutter joints

Joints between gutter lengths are the most common leak point. We clean, dry and reseal them.

uPVC fascias

Open fascia joints look untidy and can let water in. A neat bead closes them up.

What affects the quote in Westgate-on-Sea

You’ll get a clear quote before we start. It takes into account:

  • Mould in or behind the old joints
  • The size of the job
  • The number of rooms or windows
  • How easy the joints are to reach

The cost depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You’ll have a clear quote before any work starts, so you know where you stand.

Asking for a quote

Photos help, but a description is a good start. Try to tell us:

  • Any previous sealing or DIY work
  • Roughly how big the job is
  • Where the property is
  • The type of property

We quote each job on its own, so start by telling us what you need. Simply phone 0345 464 0079 or email us and describe the job and send pictures if you have them.

Common problems we fix in Westgate-on-Sea

A sealant applied to a damp or dirty joint will not bond. Some quick repairs peel off within a season or two for this reason.

Common reasons people contact us include:

  • Old gutter sealant that has let go
  • Stop ends leaking at the end of a run
  • Trim joints where the sealant has failed
  • Gaps along fascia and soffit joints

For landlords with property near Westgate-On-Sea station, leaking gutter joints on a rental are best caught before they stain the walls.

Questions to ask before booking

  • Who turns up on the day
  • Whether they’re fully insured
  • What happens if they find a problem under the old sealant
  • How the joint is cleaned and prepared

Our hiring checklist

FAQs for Westgate-on-Sea

Do you work for landlords with property near Westgate-On-Sea station?

Yes, we work for letting agents and landlords. You can call 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before we start.

Is gutter sealing in a coastal place like Westgate-on-Sea any different?

Coastal homes put outside sealant through more weather than inland ones, so the choice of sealant and the preparation matter even more. Walls facing the sea are usually the first to need attention.

What should I tell you?

The location, the problem and the rough size of the job. If you can, email a few pictures.

Can new sealant go over the old?

No. Fresh sealant doesn’t stick to old sealant, and anything trapped underneath, including mould and water, stays there. It all has to come out first.

Is it possible to stop a gutter joint dripping with sealant?

Often, yes. A clean, dry joint resealed with gutter sealant usually stops the drip. If the section is split or warped, it needs replacing.

Should I try DIY first?

Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.

Do you offer different sealant colours?

We help you choose a colour that suits, from white and clear to greys and other shades. The product needed can limit the range.

Do the sealants smell?

Sometimes, a little. It fades as the sealant cures, and ventilation helps.

Outside joints around Westgate-on-Sea

Westgate-on-Sea is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. Historic houses like Quex Park (about 1.2 miles south-west) are a reminder that the area around Westgate-on-Sea has older buildings as well as new. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth.

For site and facilities teams at buildings such as St Saviour's Church of England Junior School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. In the older streets around Church of St Saviour, older walls, gutters and the joints where extensions meet them need a flexible sealant.

Westgate-on-Sea is about 2 miles west of Margate, in Kent. Every kind of property in Westgate-on-Sea is covered for gutter sealing, old or new, large or small. Every job comes with our one-year guarantee. Westgate-on-Sea is one of 922 places in Kent we cover for gutter sealing. You can also see our page for Chelmsford, about 44 miles away.

Every address in CT8, CT9 and CT7 is within our area for gutter sealing, from the main roads to the quietest streets. Whether your property is on Sea Road, Thanet Road and Cedric Road or anywhere close by, our applicators can take on the job. Westgate-on-Sea sits on or near the A28, so getting to you is simple. If you are just outside Westgate-on-Sea, we cover Garlinge (1 mile east), Westbrook (1 mile east), Birchington (1 mile west), Flete (2 miles south-east) and Acol (2 miles south-west). Further out, we also cover Canterbury (13 miles south-west), Ramsgate (4 miles south-east), Broadstairs (4 miles east), Whitstable (13 miles west), Deal (12 miles south) and Herne Bay (9 miles west).

Landmarks near Westgate-on-Sea

Around Westgate-on-Sea, our work takes us to homes and buildings near Ursuline College and the streets around them. There’s a railway station in Westgate-on-Sea itself: Westgate-On-Sea station. Other landmarks nearby include Powell-Cotton Museum (1.4 miles south-west) and Queen Elizabeth the Queen Mother Hospital (2.3 miles east). The countryside around Westgate-on-Sea includes Sandwich and Pegwell Bay.

Map of Westgate-on-Sea © OpenStreetMap contributors

Can I do it myself?

If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.

A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job