Dundee · Scotland
Wellbank Gutter Sealing
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for homes and businesses in Wellbank and across Dundee. Fully insured, ARBOMaster approved and guaranteed for a year.
- Streaks down the brickwork from a leaking joint
- Open joints in fascias and soffits
- Quick sealant fixes on gutters that didn’t last
Do you need gutter sealing in Wellbank?
Stop ends take pressure from water running along the gutter. Once the seal behind them fails, they drip.
Any of these means the joints need attention:
- Failed sealant on a garage door frame
- Damp patches inside below a leaking gutter
- Fascia boards with gaps between them
- Old gutter sealant that has let go
In and around Wellbank, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint.
Before booking anyone
- What happens if they find a problem under the old sealant
- Whether VAT is included
- What preparation is included
- How much experience the applicator has
Gutter sealing for homes and businesses in Wellbank
Our work covers gutter joints and end caps as well as fascias and soffits, along with roofline trims and garage door frames. It’s all about the joints rather than new guttering. Common call-outs are for earlier gutter repairs that have peeled off and internal damp traced to a gutter joint, on roofline trims, uPVC fascias and gutter joints.
Outside joints can only be sealed when they’re dry, so work in Wellbank depends on the weather. Let us know about access to every wall and roofline.
Whatever the size of the job, it’s backed by our 12-month guarantee in Wellbank and across Dundee.
- Location
- Wellbank (DD5)
- Wider area
- Dundee
- Cover
- A year, on every job
- Price
- A clear price before work begins
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Nearby places to Wellbank
Also in Wellbank
What the job involves on each surface
Gutter joints
Most gutter leaks start at a joint between sections. We clean, dry and reseal them.
uPVC fascias
We seal fascia joints, not replace the boards. Damaged boards need replacing by an installer.
What happens if it’s left?
A dripping gutter joint keeps wetting the same patch of wall. Left, it can stain walls and lead to damp, so it’s worth sealing early. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all play a part.
Why Wellbank clients choose us
- Any old sealant cut out fully, not covered over
- We leave the area clean and tidy
- Approved under the ARBOMaster scheme
- Arbo and Everbuild products
What we do, step by step
Before we leave, we go over the finished joints with you. The work normally takes a few hours, depending on the number of joints and the access, depending on the size of the job. Somewhere like Wellbank may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First we trace the drip and check the gutter isn’t damaged.
- We remove the old sealant and clean the joint.
- We dry the joint so the new sealant can bond.
- We seal the joint with a sealant made for gutters.
- The gutter is checked and debris around the joints cleared.
Getting ready for the visit
- Let us know about earlier repairs to the joints
- For indoor joints, keep the area dry beforehand if you can
- On commercial sites, let us know about site rules
Ask for a quote
Every job is quoted individually. Just email us at info@mrmastic.co.uk with the details and send pictures if you have them.
Related advice
Wellbank buildings and the weather
Plenty of Scottish homes have harled walls, and joints where harling meets other materials need a sealant that can grip and flex. Dundee’s older tenements are sandstone, and the city sits on the Firth of Tay.
For landlords with property near Monifieth station, a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking.
Wellbank is about 3 miles north of Broughty Ferry, in Dundee. From the centre of Wellbank to the outskirts, we cover gutter sealing for every kind of property. We cover 50 towns and villages across Dundee. Dundee is on our list too, about 6 miles from Wellbank.
Work in DD5 is quoted and booked the same way as anywhere else. You’ll find streets such as Meadowbank Drive, Applehill Gardens and Gagie Bank, all of which we cover. Other places close to Wellbank include Kingennie (1 mile south-east), Bucklerheads (1 mile south-west), Drumsturdy (1 mile south-east), Newbigging (2 miles east) and Monikie (2 miles north-east). Within a short drive, we also cover Dundee (6 miles south-west), Broughty Ferry (3 miles south), Stobswell (5 miles south-west), Monifieth (3 miles south-east), Blackness (7 miles south-west) and Barnhill (3 miles south).
Around Wellbank
Wellbank’s nearest station is Monifieth station, about 3.2 miles south-east. Other landmarks nearby include Ballumbie Castle (2.1 miles south-west) and James Guthrie Orchar Art Gallery (3.9 miles south). Green spaces nearby include Trottick Mill Ponds.
FAQs for Wellbank
Is Wellbank within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
Can you do gutter sealing in Wellbank?
Yes. We work across all of Scotland, and Wellbank is part of that. Just email us at info@mrmastic.co.uk with a few details of the job.
Can tenants book the work?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Can you seal over the old sealant?
No, because it fails. We remove every bit of old sealant first, so the new joint bonds to clean surfaces.
Do you install new fascias or gutters?
No, we reseal joints, end caps and trims. Replacement needs a gutter installer or roofer.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Can you seal fascia and soffit joints?
Yes. Open joints along uPVC fascias and soffits can be sealed in a colour to suit.
Are you fully insured?
Yes. We’re fully insured.
What affects the cost of gutter sealing
There’s no set price list, because no two jobs are the same. The quote depends on:
- The size of the job
- Any mould that needs treating
- When we can work, for business premises
- How many rooms, windows or areas are involved
What it costs depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. We give a clear quote before any work starts, so you know where you stand.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- If it’s domestic, commercial or a hotel
- Any access issues, like height or stairs
- What’s wrong with the joints now
- Any previous sealing or DIY work
To get a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We’ll give you a clear quote before any work starts.
Aftercare tips
Good habits help new joints last longer. A few tips:
- Glance at the soffit joints now and then
- Check that water runs out of the downpipes
- Watch for drips in a downpour
- Sort out a dripping joint early
Have a look at the gutter during a downpour. It’s the easiest time to see a leak.
If an end cap is dripping, deal with it before winter. A winter of drips can lead to damp patches.
What we cannot put right
It helps to know what we cannot do too:
- Blocked downpipes
- Cracked, split or warped gutter sections
- Leaks from the roof rather than a joint
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly before booking.
Joints and surfaces we work on
- Roofline trims
- uPVC fascias
- Gutter joints
- Garage door frames
- Soffit joints
- Gutter end caps