Kent · England
Gutter, fascia & soffit sealing in Walmer, Kent
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for Walmer, backed by a one-year guarantee. Ask us for a quote.
- Old gutter sealant that has let go
- Old sealant on roofline trims that has split
- End caps that drip every time it rains
How we handle gutter sealing in Walmer
We do not replace gutters, fascias or roofs. What sealant does is close joints; it won’t fix a broken bracket, a cracked section or a blocked downpipe. If you’re dealing with old sealant on roofline trims that has split and dripping gutter ends, we can put it right, whatever the surface.
Outbuildings, garages and conservatories around homes in places like Walmer add more joints to look after. Leaks generally start at a gutter end, a garage door frame or where an extension meets the house.
The work is covered for a year after we finish. If there’s a problem with it, please phone 0345 464 0079 or send us an email.
- Location
- Walmer (CT14)
- Region
- Kent
- Cover
- One year on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Common problems we fix in Walmer
Sagging sections pull joints apart. Resealing a sagging joint will not last so the brackets need attention first.
If you can see any of these, it’s time to have the joints looked at:
- Old gutter sealant that has let go
- End caps that drip every time it rains
- Open joints in fascias and soffits
- Old sealant on roofline trims that has split
Managing a site like The Downs Church of England Primary School? Then movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
What to look for in a quote
- How long to leave it before use
- Whether you can choose the colour
- What happens if the job turns out different
- Whether the sealant suits the joint
What we cannot put right
We’ll always be straight with you, so here’s what new sealant will not do:
- Cracked, split or warped gutter sections
- Gutters that have dropped or pulled away
- Rotten or damaged fascia boards
If in doubt, ring 0345 464 0079 or send us an email and we’ll say what we think before you book.
Surfaces we seal
- Soffit joints
- Gutter joints
- Roofline trims
- Gutter end caps
- uPVC fascias
- Garage door frames
Work for landlords, hotels and businesses
For anyone letting property in or around Walmer, several properties can go on one quote. Send us the addresses and the work at each, and pictures by email help.
We work for landlords and agents as well as homeowners. Sealant work between tenants keeps a property looking cared for before the next move-in.
Why it’s worth doing now in Walmer
Leaving a leaking end cap can send water down the wall all winter. It’s a small job to put right before the damage spreads. In an older home around Walmer, damp from a failed joint can get into timber and plaster, and that is a much bigger job than renewing the sealant.
Combining jobs into one visit usually makes better use of the time than several visits. You’ll get one clear quote for the whole job.
Why Walmer clients choose us
- Approved under the ARBOMaster scheme
- White, clear, grey or another colour, product permitting
- Neat joints and a tidy finish
- Homes, businesses and hotels
Take a look at our cost guide and what customers say.
The process
We bring everything the job needs with us, so you do not need to buy or prepare anything. After a quick look at the joints together, we protect the area and start. Most jobs take an hour or two for a few joints, longer for a full run. Parking around Walmer is usually easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- First we trace the drip and check the gutter isn’t damaged.
- We remove the old sealant and clean the joint.
- We dry the joint so the new sealant can bond.
- We seal the joint with a sealant made for gutters.
- We check the run and clear debris near the joints.
How to prepare
- Try not to wet indoor joints just before the visit
- On commercial sites, let us know about site rules
- Let us know about stairs, lifts or work at height
How to get a quote
For gutter sealing in Walmer, call 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Advice
FAQs for Walmer
Can you help a landlord with a rental near Walmer station?
Yes. We work for letting agents and landlords as well as householders. Just ring 0345 464 0079 or send us an email with the address and what needs doing, and we’ll send you a clear quote.
Will you come out to Walmer?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
What do you need from me for a quote?
The location, the problem and the rough size of the job. If you can, email a few photos.
Do you install new fascias or gutters?
That’s not something we do. Our work is sealing joints; replacing gutters and fascias needs a gutter or roofline installer.
Will the old sealant be removed?
Yes, every time. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Can new sealant go over the old?
No. New silicone won’t bond to old silicone, and it traps any mould or water underneath. It all has to come out first.
Is it messy?
We keep the work tidy. We protect what’s around the joints.
Is gutter cleaning part of the job?
Only around the joints we seal, so the sealant can bond. A full gutter clean is a separate job.
What affects the cost of gutter sealing
Call for a quick quote. The main things that affect it are:
- The product the joint needs
- The size of the job
- Access and height
- How many areas need sealing
What you pay reflects the work, not a rough estimate. That’s why we ask about the job first.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- The problem you’ve noticed
- The type of property
- A few photos by email, if you can
- Where the job is, and your postcode
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, phone 0345 464 0079 or send us an email.
Walmer buildings and the weather
Walmer is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
For an older house near a landmark such as St Mary's Church, an extension built onto an older house moves differently, and the joint between them takes the strain. Rented homes near Walmer station change hands often, and a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking.
Walmer is about 6 miles north-east of Dover, in Kent. From the centre of Walmer to the outskirts, gutter sealing is available for homes and businesses alike, from flats and houses to offices and hotels. Across Kent, we cover 922 places, Walmer among them. Chelmsford is on our list too, around 54 miles away.
Here we cover the CT14 postcode area for gutter sealing. We cover properties on Lawn Road, York Road and Grams Road. Walmer is on the A258, so it’s easy for us to get to with everything needed for gutter sealing. We also cover the places around Walmer: Deal (1 mile north), Mill Hill (1 mile north-west), Great Mongeham (2 miles north-west), Sholden (2 miles north-west) and Ripple (2 miles west). Larger places within reach include Canterbury (15 miles west), Margate (12 miles north), Dover (6 miles south-west), Folkestone (13 miles south-west), Ramsgate (9 miles north) and Broadstairs (11 miles north).
Near you in Walmer
Around Walmer, our work takes us to homes and buildings near Goodwin Academy and The Telegraph pub and the streets around them. The closest station to Walmer is Walmer station, roughly 0.7 miles west of the centre. Well-known places in the area include Kent Museum of the Moving Image (1.4 miles north) and Walmer Castle (within half a mile south-east).
How the job changes by surface
Gutter joints
Most gutter leaks start at a joint between sections. They’re cleaned out, dried and resealed.
Roofline trims
Trim joints are cut out and resealed suited to the material.