East Sussex · England
Tile Hurst Gutter Sealing
We cover Tile Hurst for sealing leaking gutter joints, end caps, fascias, soffits and roofline trims. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Gaps along fascia and soffit joints
- Dripping gutter ends
- Trim joints where the sealant has failed
Work for landlords, hotels and businesses
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we’ll give you a quote.
Gutter sealing in Tile Hurst
Open fascia and soffit joints spoil the roofline and can let weather in. They’re sealed in a matching colour where possible. If you have old gutter sealant that has let go and damp on an inside wall under a dripping gutter, we can put it right, on garage door frames, gutter end caps and gutter joints alike.
Around Tile Hurst, older buildings can be stone, brick or timber-framed, many with extensions added later. Where one material meets another is where water usually gets in.
Big or small, you get the same 12-month guarantee in Tile Hurst and across East Sussex.
- Place
- Tile Hurst (BN27)
- Wider area
- East Sussex
- Cover
- A year, on every job
- Price
- A clear price before work begins
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Quotes for gutter sealing in Tile Hurst
Call for a quick quote. The main things that affect it are:
- When we can work, for business premises
- The old material and how stubborn it is
- Whether the work is at height
- Which sealant suits the joint
The cost reflects the work involved, not a rough estimate. That is why we ask about the job first and agree the price before starting.
Helping us quote
Photos by email are helpful but not essential. Please mention:
- Pictures of the joints, sent by email
- How we’d reach the joints
- What’s wrong with the joints now
- If someone has resealed it before
We don’t publish a price list, as no two jobs are quite the same. Instead, we send you a clear quote for your job. To arrange one, phone 0345 464 0079 or send us an email.
Why act early in Tile Hurst
A dripping stop end can soak the wall right through the wet months. It’s a small job to put right compared with treating damp later. Around Tile Hurst, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Why Tile Hurst customers choose us
- Domestic, commercial and hotel work
- An ARBOMaster approved applicator
- We’re fully insured
- Sealant colour chosen to suit
Take a look at our cost guide and what customers say.
Questions from Tile Hurst
Is Tile Hurst within the area you cover?
Yes, Tile Hurst is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you work for landlords with property near Polegate station?
Yes, landlords and agents are among the people we work for. Just call 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear price.
Do you install new fascias or gutters?
That’s not something we do. Our work is sealing joints and replacement is a job for an installer.
Can you do several jobs on one visit?
Yes, and it often makes sense. Doing several areas at once is normally more efficient, so mention them when you ask for a quote.
Will you leave a mess?
Not at all. The area is protected while we work and cleaned up afterwards.
What guarantee comes with the job?
Our one-year guarantee covers every job, gutter and fascia work included.
Is sealant enough for a gutter that has dropped?
Sealing a sagging joint will not last. The gutter needs refixing by a gutter installer, and we’ll tell you if that’s what we find.
Where are you based?
Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.
What we do, step by step
When we arrive, we look over the joints with you first, so you know exactly what we are doing. We protect the surfaces around the joints before any work starts. Most jobs take anything from an hour or two to a few hours. Somewhere like Tile Hurst needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First we agree which joints need sealing.
- We clean out each joint.
- We make sure everything is dry.
- The sealant is applied and finished.
- We check our work before we leave.
Getting ready for the visit
- Let us know about earlier repairs to the joints
- Tell us about access, such as stairs, a lift or high-level joints
- Let us know about parking restrictions
Ask for a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Advice
When it is not the sealant
Some problems need a builder, plumber or other trade rather than us:
- Boards that have decayed or split
- Blocked downpipes
- Cracked, split or warped gutter sections
If you’re not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer.
What we seal
- uPVC fascias
- Gutter end caps
- Garage door frames
- Gutter joints
- Roofline trims
- Soffit joints
Nearby places to Tile Hurst
Also in Tile Hurst
Tile Hurst buildings and the weather
The South East is one of the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast. Historic houses like Michelham Priory (about 1.1 miles south-west) are a reminder that the area around Tile Hurst has older buildings as well as new. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth.
Managing a site like Grovelands Community Primary School? Then movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. Homes close to Zoar Strict Baptist Chapel include some older properties, and the joints between older walls, newer extensions and the roofline need a sealant that can move.
Tile Hurst is about 1 mile north-west of Hailsham, in East Sussex. If you need gutter sealing in Tile Hurst, it’s easy to get a quote: please ring 0345 464 0079 or send us an email. We are based in Crawley and cover East Sussex. Tile Hurst is one of 289 places in East Sussex where we work. For nearby work, see our Brighton page (16 miles or so).
We work across the BN27 postcode area for gutter sealing. If you’re just outside Tile Hurst, we cover Lower Horsebridge (1 mile north), Hailsham (1 mile south-east), Upper Horsebridge (1 mile north-east), Lower Dicker (1 mile north-west) and Hellingly (1 mile north-east). Within a short drive, we also cover Eastbourne (6 miles south), Hastings (14 miles east), Bexhill-on-Sea (10 miles east), Seaford (9 miles south-west), Lewes (10 miles west) and Crowborough (13 miles north).
Around Tile Hurst
Around Tile Hurst, our work takes us to homes and buildings near Hailsham Community College, The Grenadier pub and Bede's Prep School and the streets around them. For rail, the closest station is Polegate station, about 3.4 miles south of the centre. Other landmarks nearby include Herstmonceux Castle (4.5 miles east) and Hellingly Hospital Railway (1.6 miles north-east). Not far away are Combe Hill.
What we’re called out for in Tile Hurst
Gutter joints rely on seals that age. Sun and cold make the gutter expand and contract, and old seals crack or slip.
Common reasons people contact us include:
- Internal damp traced to a gutter joint
- End caps that drip every time it rains
- Quick sealant fixes on gutters that didn’t last
- Wet patches on the wall under a gutter joint
For landlords with property near Polegate station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.
What your quote should include
- How the colour is chosen
- What product goes in the joint
- How the surfaces are prepared before sealing
- Are they insured?
How to look after the new joints
Looking after new joints is easy, and it makes a real difference:
- Deal with a drip before winter
- Have sagging gutters refixed early
- Rest ladders on the wall, not the gutter
- Watch the wall under the gutters for staining
If a gutter starts to sag, get the brackets looked at. Movement will pull the joints open again.
A leaking stop end is best sealed before the wet months. Water down the wall all winter can cause damp.