East Sussex · England

Tile Hurst Glazing Silicone

Glazing silicone for conservatories, rooflights, glass panels and shower screens for homes and businesses in Tile Hurst and across East Sussex. Fully insured, ARBOMaster approved and guaranteed for a year.

  • Water running down inside the glass
  • Cracked silicone between glass panels
  • Split or lifting silicone on glass

Book glazing silicone in Tile Hurst

Glazing silicone in Tile Hurst

We work across Tile Hurst on glazing joints for homes and businesses. From conservatories to shower screens, it’s the same careful method. We work on conservatory frames, shower screens and glass balustrade bases, and the jobs we see most are stained, discoloured glazing silicone and water escaping where a screen meets the wall.

Around Tile Hurst, many homes face open ground, so their windows and doors take the full weather. That exposure dries out and cracks the mastic around frames and sills faster.

Our work is backed for twelve months.

Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter
Where
Tile Hurst (BN27)
Region
East Sussex
Guarantee
A year, on every job
Quotes
A clear quote up front
Telephone
0345 464 0079
Page updated
26 October 2026

Common problems we fix in Tile Hurst

UV light ages silicone and roof joints get the most sun. It goes brittle, cracks and stops sticking to the glass and frame.

If you can see any of these, it’s time to have the joints looked at:

  • Mouldy sealant around glass panels
  • Sealant that was laid over old silicone and failed
  • Drips on the inside of a conservatory window
  • Glass-to-glass joints that have split

Schools such as Grovelands Community Primary School are buildings too, and its window and door frames need their mastic kept sound, just like a home’s.

Questions to ask before you book

  • Whether all the old sealant comes out first
  • What product goes in the joint
  • Is VAT in the price?
  • How much experience the applicator has

How to choose a mastic man

Surface by surface

Conservatory frames

Frame-to-wall joints on a conservatory move with the weather. We reseal them with a sealant suited to the frame.

Rooflights

Water around a rooflight is not always the sealant. We check which it is.

Landlords, agents and businesses in Tile Hurst

If you manage several properties in or around Tile Hurst, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs.

Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.

Tile Hurst homes and the weather

With historic houses such as Michelham Priory (about 1.1 miles south-west) nearby, there’s older building stock in the area around Tile Hurst as well as newer homes. Where a home is older, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic. Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.

In the older streets around Zoar Strict Baptist Chapel, frames set in older brick or stone need a sealant that suits the wall as well as the frame. If you let a flat or house near Polegate station, leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies.

Tile Hurst is about 1 mile north-west of Hailsham, in East Sussex. If you need glazing silicone in Tile Hurst, it’s easy to get a quote: please ring 0345 464 0079 or email us. We’re based in Crawley and cover East Sussex, Tile Hurst included. Across East Sussex, we cover 289 places, Tile Hurst among them. There’s also a page for Brighton, about 16 miles away.

Postcode districts we cover here for glazing silicone: BN27. Neighbouring places we cover for glazing silicone include Lower Horsebridge (1 mile north), Hailsham (1 mile south-east), Upper Horsebridge (1 mile north-east), Lower Dicker (1 mile north-west) and Hellingly (1 mile north-east). Larger places within reach include Eastbourne (6 miles south), Hastings (14 miles east), Bexhill-on-Sea (10 miles east), Seaford (9 miles south-west), Lewes (10 miles west) and Crowborough (13 miles north).

Local landmarks in Tile Hurst

Locally, jobs take us to homes and businesses close to Hailsham Community College, The Grenadier pub and Bede's Prep School, among other places. For rail, the closest station is Polegate station, roughly 3.4 miles south. Nearby you will also find Herstmonceux Castle (4.5 miles east) and Hellingly Hospital Railway (1.6 miles north-east). The countryside around Tile Hurst includes Combe Hill.

Map of Tile Hurst © OpenStreetMap contributors

When it is not the sealant

Some problems need a builder, plumber or other trade rather than us:

  • A sagging or failing conservatory roof
  • Misting between the panes of a double-glazed unit (a failed unit for a glazier)
  • Failed flashing around a conservatory

If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think.

Surfaces we seal

  • Glass-to-glass joints
  • Glass balustrade bases
  • Glass-to-frame joints
  • Shower screens
  • Rooflights
  • Conservatory frames

How it works

Before we leave, we go over the finished joints with you. The work normally takes anything from an hour or two to most of a day, depending on the size of the job, depending on the size of the job. Somewhere as small as Tile Hurst, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. We trace the leak and confirm it’s a sealant joint.
  2. The failed silicone is cut out without marking the glass or frame.
  3. The joint is cleaned and degreased.
  4. A neutral-cure glazing silicone is applied and tooled.
  5. We check the finished joints and test with water where it’s safe.

Preparing for the visit

  • Clear the area around the work
  • Let us know about stairs, lifts or work at height
  • Mention any leaks or damp you’ve noticed

Ask for a quote

Every job is quoted individually, so the first step is telling us about yours. Simply ring 0345 464 0079 or email us and describe the job, and photos are welcome.

Get a price

Read more

Looking after it afterwards

After the cure time, these simple habits help:

  • Ventilate the conservatory to cut condensation
  • Get a new leak looked at quickly
  • Keep harsh solvents off the silicone
  • Keep conservatory gutters clear of leaves

Keep the new joints dry for as long as we advise so the silicone can set properly. From then on, a mild glass cleaner is all it needs.

Conservatory leaks rarely stay small. Water travels along the frame and into the wall so it’s best dealt with right away.

DIY sealant or a professional job?

If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.

A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

Tile Hurst questions

Is Tile Hurst in your area for glazing silicone?

Yes, Tile Hurst is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or send us an email and let us know what needs doing, and we will give you a clear price.

Do you work for landlords with property near Polegate station?

Yes, rental work is part of what we do. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear quote.

What does glazing silicone cost?

Every job is different, so each one gets its own quote. To get one, call 0345 464 0079 or send us an email with a short description of the job.

Do the sealants smell?

It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.

How long does the job take?

It depends on the size of the job, but most jobs take a few hours for most jobs. We will tell you when we quote.

Which silicone is used for glass joints?

Glass needs a sealant made for glazing. We use neutral-cure glazing silicone and anti-fungal silicone in wet areas.

Will you leave a mess?

We keep the work tidy. We protect what’s around the joints, and we clear up when we’re done.

Do you seal glass balustrade bases?

Yes. The sealant joint at the base can be renewed. Fitting glass is a separate trade.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job