Hampshire · England

Gutter Sealing in Tapnage

Our applicators work in Tapnage on sealing leaking gutter joints, end caps, fascias, soffits and roofline trims. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.

  • Cracked sealant along roofline trims
  • Dripping gutter ends
  • Failed sealant on a garage door frame

Trusted gutter sealing in Tapnage

Gutter sealing in Tapnage, done properly

A drip at a gutter joint is easy to ignore, but each shower sends water to the same place. Sealing it is quick if the gutter is otherwise in good order. If you’re dealing with leaking gutter joints and stop ends and rain getting in around a garage door, we can put it right.

In a village or hamlet like Tapnage, older cottages and farm buildings often stand in the open, where walls and rooflines take the weather head on. Gutter joints and wall joints there need a sealant that can flex and stay put.

We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we’ll sort it.

Place
Tapnage (PO17)
Region
Hampshire
Cover
A year, on every job
Quote
A clear quote up front
Telephone
0345 464 0079
Updated
26 October 2026
Applicator reaching up to seal an external door frame on a sunny day

DIY sealant or a professional job?

Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.

Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.

Honest limits

We’d rather tell you now than do work that will not last, so here’s what sealant can’t put right:

  • Fascias that need replacing
  • Downpipes that are blocked or broken
  • Roof leaks, slipped tiles or failed flashing (a roofer’s job)

If you’re not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer.

Where we work in Tapnage

  • Roofline trims
  • Gutter end caps
  • uPVC fascias
  • Garage door frames
  • Gutter joints
  • Soffit joints

Questions from Tapnage

Will you come out to Tapnage?

Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.

I let a flat near Swanwick station. Can you help?

Yes, landlords and agents are among the people we work for. Just ring 0345 464 0079 or email us with the address and what needs doing, and we’ll give you a clear quote.

What guarantee comes with the job?

Our one-year guarantee covers every job.

How long should I leave it?

That depends on the sealant used, so follow the cure time we give you.

Can new sealant go over the old?

No, because it fails. The old sealant always comes out first.

Do you hold any approvals?

Yes. Mr Mastic is an ARBOMaster approved applicator, and we are fully insured.

Is it possible to stop a gutter joint dripping with sealant?

In many cases, yes. A clean, dry joint resealed with gutter sealant usually stops the drip. A split or warped section needs replacing.

Do you seal gaps in fascias and soffits?

Yes. Open joints along uPVC fascias and soffits can be sealed in a matching colour.

What affects the cost of gutter sealing

Some jobs are bigger than they look, and some smaller. The main factors:

  • The number of rooms or windows
  • Mould in or behind the old joints
  • Access and height
  • Any working-time requirements on site

There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please phone 0345 464 0079 or email us and we’ll talk you through it.

What to tell us for a quote

Before you ask for a quote, have a think about:

  • Access, such as stairs, a lift or height
  • Roughly how big the job is
  • Photos by email, if that’s easy
  • What’s wrong with the joints now

To get a quote, phone 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We will send you a clear quote before any work starts.

How the visit works

On the day, there’s very little for you to do. Show us the job and we will take it from there. The job generally takes an hour or two for a few joints, longer for a full run. For a village or hamlet like Tapnage, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. We start by tracing the leak and checking the gutter itself is sound.
  2. Old sealant and dirt are removed from the joint.
  3. We make sure the joint is dry before sealing.
  4. An exterior or gutter sealant is applied to the joint.
  5. The run is checked and any debris near the joints is cleared.

Before we arrive

  • Let us know about earlier repairs to the joints
  • Keep children and pets away from the work area
  • On commercial sites, let us know about site rules

Get a quote

For gutter sealing in Tapnage, ring 0345 464 0079 or email us. Tell us what the problem is and where, and you will get a clear quote before we start.

Get a price

Related advice

How the job changes by surface

Gutter end caps

A leaking end cap sends water straight down the wall. It’s a quick reseal.

uPVC fascias

We seal fascia joints, not replace the boards. Damaged boards need replacing by an installer.

When to call us in Tapnage

Overflowing gutters can look like leaking joints. A blocked downpipe makes water back up so we check the cause first.

These are the problems we’re asked about most:

  • Failed sealant on a garage door frame
  • Old sealant on roofline trims that has split
  • Open joints in fascias and soffits
  • End caps that drip every time it rains

For site and facilities teams at buildings such as The Henry Cort Community College, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.

Before booking anyone

  • Which sealant they’ll use, and why
  • Whether they seal over old material or remove it
  • How much experience the applicator has
  • What the quote includes, VAT included or not

Our hiring checklist

Gutter sealing in Tapnage: local notes

Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.

For landlords with property near Swanwick station, leaking gutter joints on a rental are best caught before they stain the walls.

Tapnage is about 3 miles north of Fareham, in Hampshire. Homes, rented property, offices and hotels in Tapnage is covered for gutter sealing, old or new, large or small. The work is guaranteed for a year. Tapnage is one of 683 towns and villages in Hampshire where we work for gutter sealing. There’s also a page for Southampton, roughly 8 miles from Tapnage.

We cover every part of the PO17 postcode area for gutter sealing and the streets around it. We also cover the places around Tapnage: Knowle (1 mile south-east), Funtley (1 mile south), Whiteley (2 miles west), Burridge (2 miles west) and Segensworth (2 miles south-west). Further out, we also cover Winchester (12 miles north), Gosport (7 miles south-east), Havant (10 miles east), Eastleigh (8 miles north-west), Fareham (3 miles south) and Horndean (9 miles east).

Near you in Tapnage

Tapnage’s nearest station is Swanwick station, about 2.4 miles south-west. A little further out are Knowle Hospital (0.9 miles south-east) and Fareham Shopping Centre (3.1 miles south-east). The countryside around Tapnage includes Swanwick Lakes.

Map of Tapnage © OpenStreetMap contributors

Landlord and commercial work in Tapnage

Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. We can quote for more than one property at once.

We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job