Scottish Borders · Scotland

Gutter Sealing in Smailholm

Problem with your gutter and fascia joints in Smailholm? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.

  • Damp on an inside wall under a dripping gutter
  • Open joints in fascias and soffits
  • Streaks down the brickwork from a leaking joint

Trusted gutter sealing in Smailholm

About our gutter sealing in Smailholm

It’s easy to live with a dripping gutter joint, but each shower sends water to the same place. Resealing it is a small job if the gutter is otherwise in good order. We’re often asked to deal with stop ends leaking at the end of a run and earlier gutter repairs that have peeled off, on gutter joints, soffit joints and roofline trims.

Outside joints can only be sealed when they’re dry, so work in Smailholm depends on the weather, and longer journeys are planned in advance. Tell us how to reach each wall, gutter and roofline.

We stand behind the work with a 12-month guarantee.

Place
Smailholm (TD5)
Region
Scottish Borders
Cover
One year on every job
Quotes
A clear quote up front
Email
info@mrmastic.co.uk
Updated
26 October 2026
Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house

When to call us in Smailholm

Gutter joints depend on seals that wear out. Temperature changes make gutters move, and old seals crack or slip.

The most common problems we see are:

  • Damp patches inside below a leaking gutter
  • Trim joints where the sealant has failed
  • Open joints in fascias and soffits
  • Drips from gutter joints and end caps

If you live in an older home near Smailholm Church, the joints between older walls, newer extensions and the roofline need a sealant that can move.

Before you book anyone

  • How hidden problems are handled
  • How the joint is cleaned and prepared
  • Is the old sealant removed completely?
  • Whether they’re fully insured

10 questions to ask before you book

What happens if it’s left?

Replacing fascias because of open joints is usually unnecessary. A neat seal closes the gaps as long as the boards are in good condition. In a place like Smailholm, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.

There are no prices on our website, because each job is priced on what it involves. Call for a quick quote and we’ll talk you through it.

Why us?

  • We agree the colour with you first
  • Homes, businesses and hotels
  • An ARBOMaster approved applicator
  • A 12-month guarantee on all work

See what affects the cost or customer reviews.

When it isn’t the sealant

Some problems need a builder, plumber or other trade rather than us:

  • Guttering that needs replacing
  • Leaks from the roof rather than a joint
  • Sagging gutters or broken brackets

Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly before booking.

Joints and surfaces we work on

  • Roofline trims
  • Gutter end caps
  • uPVC fascias
  • Soffit joints
  • Garage door frames
  • Gutter joints

Gutter sealing in Smailholm: local notes

Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and sound outside sealant is part of that. Plenty of Scottish homes have harled walls, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface.

In and around Smailholm, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint.

Smailholm is about 10 miles east of Galashiels, in the Scottish Borders. From the centre of Smailholm to the outskirts, we cover gutter sealing for every kind of property. Our the Scottish Borders coverage runs to 89 places, Smailholm among them. Our Edinburgh page covers work nearby (34 miles or so).

All of TD5 is covered for gutter sealing, from the main roads to the quietest streets. Neighbouring places we cover for gutter sealing include Gordon (4 miles north), Stichill (4 miles east), Maxton (5 miles south-west), St Boswells (5 miles south-west) and Earlston (5 miles west). We also work in nearby towns such as Galashiels (10 miles west), Kelso (5 miles east), Selkirk (12 miles south-west), Jedburgh (10 miles south), Duns (14 miles north-east) and Melrose (7 miles west).

Landmarks near Smailholm

A little further out are Mellerstain House (1.6 miles north) and Kelso Hospital (4.9 miles east). For a walk, there’s Brotherstone Hill and Bemersyde Moss.

Map of Smailholm © OpenStreetMap contributors

Common questions in Smailholm

Is Smailholm within the area you cover?

Yes. Smailholm is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.

Is Smailholm in your area for gutter sealing?

Yes, Smailholm is within the area we cover. Our work covers the whole of Scotland. You can send an email to info@mrmastic.co.uk and tell us what needs doing.

What sealant do you use?

The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are glad to have it sorted.

Do you hold any approvals?

Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.

Can I add another job to the visit?

Of course. Combining jobs makes good use of the visit.

What information do you need?

The location, the problem and the rough size of the job. Photos by email help too.

Can you work on commercial sites?

Yes, regularly. We can plan bigger jobs in stages to suit the site.

How the visit works

There is not much for you to do on the day. Point us to the joints and we will get on with it. The job generally takes a few hours, depending on the number of joints and the access, including the tidy-up. Somewhere like Smailholm may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.

  1. We find where the water is coming from and check the gutter is sound.
  2. We remove the old sealant and clean the joint.
  3. We dry the joint so the new sealant can bond.
  4. A gutter sealant is applied to the joint.
  5. We check the run and clear debris near the joints.

How to prepare

  • Mention any tricky access
  • For business premises, tell us about site rules or sign-in
  • For indoor joints, keep the area dry beforehand if you can

How to get a quote

A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.

Get a quick quote

Advice

Keeping the joints in good condition

Joint life depends on how it’s used and looked after. Here’s what we suggest:

  • Keep the gutters clear of debris
  • Keep ladders off the guttering
  • Look along the fascias for open joints
  • Sort out a dripping joint early

Keep downpipes clear so the gutter can drain. Blockages push water back along the gutter.

The sooner a gutter leak is sealed, the less water reaches the wall. If we find a bigger problem, we will tell you.

What affects the cost of gutter sealing

The price is agreed before any work begins. It’s based on:

  • Working hours on commercial sites
  • Any mould that needs treating
  • How much old sealant there is and how hard it is to remove
  • Whether the work is at height

Leaving a failed joint usually makes the job bigger, not smaller, as water and mould keep getting in. If you’re unsure, send an email to info@mrmastic.co.uk and we’ll give you an honest view and a quote.

What we need to know

The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:

  • What’s wrong with the joints now
  • The type of property
  • Where the property is
  • How we’d reach the joints

Want a quote for gutter sealing? Please send an email to info@mrmastic.co.uk with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.

Different surfaces, different methods

uPVC fascias

Joints between fascia boards can open over time. They’re sealed tidily with a matching sealant where possible.

Gutter end caps

We seal end caps from the inside where we can reach, after cleaning and drying.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job