Kent · England
Gutter, fascia & soffit sealing in Sepham Heath, Kent
Our applicators work in Sepham Heath on sealing leaking gutter joints, end caps, fascias, soffits and roofline trims. Old sealant removed completely, joints prepared properly and a one-year guarantee.
- Damp on an inside wall under a dripping gutter
- Old sealant on roofline trims that has split
- Open joints in fascias and soffits
Questions from Sepham Heath
I let a flat near Knockholt station. Can you help?
Yes, rental work is part of what we do. Just call 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear price.
Will you come out to Sepham Heath?
Yes. Sepham Heath is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you seal gaps in fascias and soffits?
Yes. Open joints along uPVC fascias and soffits can be sealed in a colour to suit.
Do you work on high-level gutters?
Low gutters are simple to reach. For higher work, tell us about access and we’ll confirm what’s needed.
Is it messy?
Very little: the area around the joints is protected first, and we tidy up before we go.
Do you guarantee gutter sealing?
You get our 12-month guarantee to all our work.
How long before the joint can be used?
Cure times vary by product and the conditions. Before we leave, we’ll tell you the cure time.
Do you hold any approvals?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
About our gutter sealing in Sepham Heath
Sealant only bonds to a clean, dry joint. That is why we take out the old sealant and dirt first and the joint is dried before the new sealant goes in. We work on soffit joints, gutter end caps and roofline trims, and common reasons people get in touch are garage door frames letting rain in and damp on an inside wall under a dripping gutter.
In a village or hamlet like Sepham Heath, older cottages and farm buildings often stand in the open, where walls and rooflines take the weather head on. Joints on those walls need a sealant that moves with the building and stays in place.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we will put it right.

- Location
- Sepham Heath (TN14)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Quotes
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Towns and villages near Sepham Heath
Also in Sepham Heath
What affects the quote in Sepham Heath
The price is agreed before any work begins. It’s based on:
- The product the joint needs
- Mould in or behind the old joints
- How much there is to do
- Any working-time requirements on site
What it costs depends on the size of the job, how much old material has to come out and how easy the joints are to reach. We give a clear quote before any work starts.
Helping us quote
What to tell us when you ask for a quote:
- How we’d reach the joints
- Whether it’s a home or a business
- How many joints, rooms or windows are involved
- Any previous sealing or DIY work
Want a quote for gutter sealing? Please ring 0345 464 0079 or send us an email with a few details. We will explain what we’d do and give you a clear price before work begins.
How the visit works
There is not much for you to do on the day. Show us the job and we’ll take it from there. The work itself takes a few hours, depending on the number of joints and the access, including the tidy-up. In a small place like Sepham Heath, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by tracing the leak and checking the gutter itself is sound.
- Old sealant and dirt are removed from the joint.
- The joint is dried, because sealant won’t bond to a wet surface.
- We seal the joint with a sealant made for gutters and outdoor use.
- We check the run and clear any debris we find while we’re there.
Before we arrive
- Keep pets and children clear of the area while we work
- For business premises, tell us about site rules or sign-in
- Where the joints are inside, avoid wetting them before we arrive
Getting a quote
We do not publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, ring 0345 464 0079 or email us.
Read more
DIY sealant or a professional job?
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Aftercare tips
To keep the joints looking good and working properly:
- Check that water runs out of the downpipes
- Have sagging gutters refixed early
- Watch the wall under the gutters for staining
- Glance at the soffit joints now and then
Leave the new sealant to cure as we advise and avoid disturbing it.
The sooner a gutter leak is sealed, the less water reaches the wall. If we find a bigger problem, we will tell you.
Landlords, agents and businesses in Sepham Heath
We work for letting agents and landlords as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.
In hotels, rooms out of use cost money, so the work can be planned room by room. We have worked in hotels as well as homes and businesses.
Sepham Heath buildings and the weather
Historic houses like Lullingstone Castle (about 3.1 miles north-east) are a reminder that the area around Sepham Heath has older buildings as well as new. In older buildings, older walls and rooflines need a sealant that moves with them and suits the material. Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
In the older streets around Otford Lane Mission Church, old and new materials meet at the roofline and walls, which is where sealant earns its keep. If you look after a building such as Halstead Community Primary School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. If you let a flat or house near Knockholt station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.
Sepham Heath is about 3 miles north-west of Sevenoaks, in Kent. Whether you are in the middle of Sepham Heath or further out, gutter sealing is available for homes and businesses alike, from flats and houses to offices and hotels. Across Kent, we cover 922 places, and Sepham Heath is one of them. We also work in London, around 16 miles away.
Work in TN14 works the same way as everywhere else we cover. We also cover the places around Sepham Heath: Halstead (1 mile north-west), Twitton (1 mile south-east), Badgers Mount (1 mile north), Knockholt Pound (1 mile south-west) and Shoreham (1 mile north-east). We also work in nearby towns such as Dartford (9 miles north), Sevenoaks (3 miles south-east), Royal Tunbridge Wells (14 miles south), Gravesend (12 miles north-east), Tonbridge (10 miles south-east) and Northfleet (11 miles north-east).
Around Sepham Heath
Typical jobs here are in homes near Crown Cottages The Rose And Crown Public House and Polhill Bank, among other places. The nearest railway station is Knockholt station, roughly 1.7 miles north-west. A little further out are Lullingstone Castle (3.1 miles north-east) and Sevenoaks Hospital (3.1 miles south-east). Green spaces nearby include Betsom's Hill and Dryhill Nature Reserve.
When something else is needed
We won’t take on work that will not last, so here’s what sealant cannot put right:
- Roof leaks, slipped tiles or failed flashing (a roofer’s job)
- A gutter length that has split
- Downpipes that are blocked or broken
If in doubt, ring 0345 464 0079 or drop us an email and we will say what we think.
Surfaces we seal
- Gutter joints
- Gutter end caps
- Soffit joints
- uPVC fascias
- Garage door frames
- Roofline trims
How the job changes by surface
Gutter end caps
Stop ends hold back water at the end of a run. When their seal fails, they drip.
Roofline trims
Roofline trims rely on sealant at their joints. Split sealant lets water in.
