Surrey · England
Send Marsh Gutter Sealing
Problem with your gutter and fascia joints in Send Marsh? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Wet patches on the wall under a gutter joint
- Water dripping where gutter sections meet
- Rain getting in around a garage door
Do you need gutter sealing in Send Marsh?
End caps get knocked or pushed by water. If the seal fails, water escapes at the end and runs down the wall.
These are the problems we’re asked about most:
- Old sealant on roofline trims that has split
- Water dripping where gutter sections meet
- Old gutter sealant that has let go
- End caps that drip every time it rains
If you look after a building such as Send CofE Primary School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
Questions to ask before booking
- Who turns up on the day
- When the joint can take water or movement
- Whether VAT is included
- What preparation is included
Gutter sealing in Send Marsh, done properly
Garage door frames let rain in when the sealant around them fails. The frame joint is cut out and resealed using a sealant made for outdoor use. Common call-outs are for trim joints where the sealant has failed and drips from gutter joints and end caps, across roofline trims, garage door frames and gutter joints.
Around Send Marsh, older buildings can be stone, brick or timber-framed, many with extensions added later. Where one material meets another is where water usually gets in, and they need the right sealant at the right depth.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Send Marsh (GU23)
- Wider area
- Surrey
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
How we quote for gutter sealing
For a quick quote, just ask. What matters most is:
- Whether there’s mould to deal with
- Whether the work is at height
- Which sealant suits the joint
- How much old sealant there is and how hard it is to remove
Doing several joints on one visit is normally more efficient than separate visits, so it’s worth mentioning everything you’d like done. We’ll give you a clear price for the lot.
What we need to know
Photos help, but a description is a good start. Try to tell us:
- Access, such as stairs, a lift or height
- How many joints, rooms or windows are involved
- Any previous sealing or DIY work
- Where the property is
Asking for a quote is easy: let us know the job and the location and its rough size. A few pictures by email make the job easier to understand, and we’ll take it from there.
Landlords, agents and businesses in Send Marsh
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
Your questions about gutter sealing in Send Marsh
Can you do gutter sealing in Send Marsh?
Yes. Our work covers London and the South East, and Send Marsh is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job.
Do you work for landlords with property near Clandon station?
Yes. We work for landlords and letting agents as well as householders. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.
Can you fit new guttering?
That is not something we do. Our work is sealing joints; replacing gutters and fascias needs a gutter or roofline installer.
Can I add another job to the visit?
Yes. Several rooms, windows or areas can go on one quote.
Do I have to be there?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Is there any odour?
There can be a smell while the sealant cures, which fades as it sets. Opening a window helps.
Do you hold any approvals?
Yes. We hold ARBOMaster approved applicator status, and we are fully insured.
How long does gutter sealing take?
Typically it takes an hour or two for a few joints, longer for a full run. Larger jobs naturally take longer, and we will tell you how long to expect.
Gutter sealing in Send Marsh: local notes
With historic houses such as Clandon Park (about 2.7 miles south) nearby, there’s older building stock in the area around Send Marsh as well as newer homes. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth. Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
For an older house near a landmark such as St William of York, old and new materials meet at the roofline and walls, which is where sealant earns its keep. Letting a property close to Clandon station? Then a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.
Send Marsh is about 3 miles south-east of Woking, in Surrey. Across the GU23 area, we cover gutter sealing for homes and businesses. Send Marsh is one of 395 towns and villages in Surrey we cover for gutter sealing. Crawley is on our list too, around 19 miles away.
Postcode districts we cover here for gutter sealing: GU23. If you need gutter sealing at a property on Send Marsh Road, Tuckey Grove and Stringhams Copse or a nearby road, our applicators can take on the job. You will find Send Marsh on the B368, which makes it straightforward to reach. Close by, we work in Burntcommon (1 mile south), Send (1 mile west), West Clandon (2 miles south), Sutton Green (2 miles west) and Mayford (2 miles west). We also work in nearby towns such as Guildford (4 miles south-west), Woking (3 miles north-west), Camberley (10 miles west), Epsom (11 miles east), Redhill (15 miles east) and Farnham (13 miles south-west).
Around Send Marsh
We work in homes and buildings around The Jovial Sailor pub, St John the Baptist Catholic Comprehensive School and Ripley Court School, among other places. For rail, the closest station is Clandon station, about 1.8 miles south of the centre. Other landmarks nearby include Send and Ripley History Society Museum (1 mile north-east) and Guildford Castle (4.7 miles south-west). Open spaces near Send Marsh include Boldermere Lake and St Martha's Hill.
Nearby places to Send Marsh
What else we do in Send Marsh
Keeping the joints in good condition
Aftercare is simple, and it makes a real difference:
- Look for streaks or damp on the wall below gutters
- Deal with a drip before winter
- Don’t leave a sagging gutter
- Clear leaves and moss from the gutters
A sagging gutter needs its brackets checked. If it drops, the joints will open.
Leaking gutter joints get worse over time. The same spot gets soaked every time it rains and that can cause damp inside.
Honest limits
Sealant is not the answer to every problem, and we’d rather say so up front. Sealant will not put right:
- Roof leaks, slipped tiles or failed flashing (a roofer’s job)
- A gutter length that has split
- Boards that have decayed or split
If in doubt, call 0345 464 0079 or email us and we’ll say what we think before booking.
Joints and surfaces we work on
- Gutter joints
- Gutter end caps
- Roofline trims
- Garage door frames
- Soffit joints
- uPVC fascias
The process
The work is kept neat and contained to the joints we’re treating, so you can get on with your day. The job generally takes anything from an hour or two to a few hours, and we explain the cure time before we leave. Somewhere like Send Marsh needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First we trace the drip and check the gutter isn’t damaged.
- The old sealant and dirt are cleaned out of the joint.
- We dry the joint so the new sealant can bond.
- We seal the joint with a sealant made for gutters.
- The gutter is checked and debris around the joints cleared.
How to prepare
- Clear the area around the work
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us about any water getting in
Get a quote
We do not publish a price list. Instead, we give you a clear price for your job. To arrange one, phone 0345 464 0079 or email us.