Surrey · England
Ripley Gutter Sealing
Gutter sealing for Ripley, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Stop ends leaking at the end of a run
- Cracked sealant along roofline trims
- Damp on an inside wall under a dripping gutter
When to call us in Ripley
Stop ends take pressure from water running along the gutter. Once the seal behind them fails, they drip and runs down the wall.
Look out for any of the following:
- Fascia boards with gaps between them
- Cracked sealant along roofline trims
- Water running down the wall below the gutter
- Damp patches inside below a leaking gutter
If you live in an older home near Church of St Mary Magdalen, an extension built onto an older house moves differently, and the joint between them takes the strain.
Questions to ask before you book
- How the joint is cleaned and prepared
- What the cure time is
- Is VAT in the price?
- How the colour is chosen
Gutter sealing for homes and businesses in Ripley
Water dripping from a gutter joint can stain walls and soak the ground below. Often a reseal is enough, as long as the gutter is sound. We work on soffit joints, gutter end caps and roofline trims, and people most often call us about damp on an inside wall under a dripping gutter and cracked sealant along roofline trims.
Outside joints can only be sealed when they’re dry, so work in Ripley is booked around the forecast. Let us know about access to every wall, plus any garages or outbuildings.
Big or small, it’s backed by our 12-month guarantee.
- Location
- Ripley (GU23)
- Region
- Surrey
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026

When something else is needed
Honest advice matters more to us than a booking, so here’s what sealant cannot fix:
- Problems with the roof covering
- Fascias that need replacing
- Brackets that have snapped or loosened
Not sure which it is? You can call 0345 464 0079 or drop us an email and we will tell you honestly before you book.
What we seal
- Gutter end caps
- Garage door frames
- Gutter joints
- Soffit joints
- Roofline trims
- uPVC fascias
Work for landlords, hotels and businesses
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
Towns and villages near Ripley
Also in Ripley
Questions from Ripley
Can you help a landlord with a rental near Clandon station?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or send us an email and tell us about the property, and we’ll send you a clear quote.
Do you cover Ripley for gutter sealing?
Yes, Ripley is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or drop us an email and tell us what needs doing.
Will there be a smell?
That depends on the sealant. Some smell for a while, some hardly at all.
What information do you need?
Just the basics: the address or postcode, what’s wrong and any access issues. After that, simply ring 0345 464 0079 or email us.
Will you leave a mess?
Not at all. The area is protected while we work and cleaned up afterwards.
When is the sealant fully cured?
It depends on the product. Before we leave, we will tell you the cure time.
What do you put in the joint?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Can you fit new guttering?
No, we reseal joints and trims. Replacement needs a gutter installer or roofer.
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Outside joints around Ripley
With historic houses such as Byfleet Manor (about 2.6 miles north-east) nearby, there’s older building stock in the area around Ripley as well as newer homes. In older buildings, older walls and rooflines need a sealant that moves with them and suits the material. Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
If you look after a building such as Ripley Court School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. Rented homes near Clandon station change hands often, and leaking gutter joints on a rental are best caught before they stain the walls.
Ripley is about 4 miles east of Woking, in Surrey. Whether you’re in the middle of Ripley or further out, gutter sealing is available for homes and businesses alike, from flats and houses to offices and hotels. Our area takes in 395 places across Surrey. There’s also a page for Crawley, about 19 miles away.
Work in GU23 is quoted and booked the same way as anywhere else. If you need gutter sealing at a property on High Street, Dorton Way and Wentworth Close or anywhere close by, we can help. Being close to the B2215, Ripley is easy for our applicators to reach. We also cover the places around Ripley: Ockham (2 miles east), West Horsley (3 miles south-east), East Clandon (3 miles south), East Horsley (3 miles south-east) and Effingham (5 miles south-east). Within a short drive, we also cover Guildford (5 miles south-west), Woking (4 miles west), Camberley (10 miles west), Epsom (10 miles east), Redhill (15 miles east) and Farnham (14 miles south-west).
Landmarks near Ripley
Around Ripley, our work takes us to homes and buildings near The Anchor Public House and St John the Baptist Catholic Comprehensive School, among other places. The closest station to Ripley is Clandon station, about 2.5 miles south. Well-known places in the area include The Peacocks (3 miles north-west) and Woking Community Hospital (2.8 miles west). For a walk, there’s Papercourt Marshes and Boldermere Lake.
What the job involves on each surface
Soffit joints
Open soffit joints let draughts in. We close them with a suitable sealant.
uPVC fascias
Our work is the joints, not new fascias. If boards are damaged, we will tell you.
What affects the cost of gutter sealing
Your quote is based on your job. We take into account:
- The type of sealant required
- How much old sealant there is and how hard it is to remove
- Access and height
- The number of rooms or windows
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Call for a quick quote and we’ll go through it with you.
What we need to know
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- What the problem is, such as mould, gaps, leaks or cracking
- Pictures of the joints, sent by email
- Whether it’s a home or a business
- The address or postcode of the job
Every job is quoted individually. Simply phone 0345 464 0079 or email us and describe the job and send photos if you have them.
The process
When we get to you, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes a few hours, depending on the number of joints and the access. Somewhere as small as Ripley, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by tracing the leak and checking the gutter itself is sound.
- We clean out the joint and take out the old sealant.
- The area is dried so the sealant can bond.
- Gutter or exterior sealant is applied and finished.
- The run is checked and any debris near the joints is cleared.
How to prepare
- Try not to wet indoor joints just before the visit
- Keep pets and children clear of the area while we work
- Mention if the joints have been sealed before
Get a quote
Getting a quote is simple: tell us what needs doing and where. Photos by email help us understand the job, and we’ll come back to you with a quote.
