Medway · England
Gutter Sealing in Moor Street
We cover Moor Street for sealing leaking gutter joints, end caps, fascias, soffits and roofline trims. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Trim joints where the sealant has failed
- Fascia boards with gaps between them
- Internal damp traced to a gutter joint
Gutter sealing in Moor Street, done properly
Open fascia and soffit joints spoil the roofline and can let weather in. They’re sealed in a matching colour where one is available. We work on garage door frames, gutter joints and gutter end caps, and common reasons people get in touch are quick sealant fixes on gutters that didn’t last and leaking gutter joints and stop ends.
In a village or hamlet like Moor Street, older cottages and farm buildings often stand in the open, so walls and rooflines take the full force of wind and rain. Gutter joints and wall joints there need a sealant that can flex and stay put.
There’s a 12-month guarantee on every job.
- Place
- Moor Street (ME8)
- Wider area
- Medway
- Guarantee
- A year, on every job
- Price
- A clear price before we start
- Call
- 0345 464 0079
- Last updated
- 26 October 2026

Quotes for gutter sealing in Moor Street
You will get a clear quote before any work starts. It takes into account:
- Access and height
- The type of sealant required
- The number of rooms or windows
- Any working-time requirements on site
We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote and we’ll talk you through it.
Helping us quote
Before you ask for a quote, have a think about:
- The address or postcode of the job
- Whether it’s a home or a business
- Any access issues, like height or stairs
- A few photos by email, if you can
Need a quote? Please phone 0345 464 0079 or send us an email with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Nearby places to Moor Street
Also in Moor Street
What gutter sealing looks like in Moor Street
Moor Street is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
If you live in an older home near Church of St Margaret, older walls, gutters and the joints where extensions meet them need a flexible sealant. For site and facilities teams at buildings such as Leigh Academy Rainham, larger buildings have long runs of movement joint that eventually need resealing.
Moor Street is about 2 miles east of Gillingham, in Medway. Moor Street gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Moor Street is one of 68 places in Medway where we work. There’s also a page for Chelmsford, about 27 miles away.
Jobs for gutter sealing in ME8 works the same way as everywhere else we cover. We cover properties on Seymour Road, Horseman's Green Road and South Bush Lane. Close by, we work in Rainham (1 mile west), Hartlip (1 mile south-east), Meresborough (1 mile south-west), Breach (1 mile east) and Lower Hartlip (1 mile south-east). We also work in nearby towns such as Chatham (4 miles west), Rochester (6 miles west), Strood (7 miles west), Luton (4 miles west), Lordswood (4 miles south-west) and Hoo St Werburgh (5 miles north-west).
Landmarks near Moor Street
We work in homes and buildings around Berengrave Chalk Pit, The Railway pub and Riverside Primary School. The closest station to Moor Street is Rainham (Kent) station, about 0.8 miles north-west. A little further out are Medway Maritime Hospital (4 miles west). For a walk, there’s Bishop Saltings and Detling Hill.
Work for landlords, hotels and businesses
We work for landlords and agents as well as householders. Sealant work between tenants keeps a property looking cared for.
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
What we’re called out for in Moor Street
Water spilling over a blocked gutter is often mistaken for a leak. A blocked downpipe makes water back up, which is why we look before we seal.
If you can see any of these, it’s time to have the joints looked at:
- Quick sealant fixes on gutters that didn’t last
- Water dripping where gutter sections meet
- Old sealant on roofline trims that has split
- End caps that drip every time it rains
Letting a property close to Rainham (Kent) station? Then a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking.
Comparing quotes
- Whether they seal over old material or remove it
- How much experience the applicator has
- Are they insured?
- What happens if the job turns out different
How the visit works
When we arrive, we look over the joints with you first, so there are no surprises. Surfaces next to the work are protected before we start. The work normally takes an hour or two for a few joints, longer for a full run. In a small place like Moor Street, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we agree which joints need sealing.
- Each joint is cleaned and any old sealant removed.
- We make sure everything is dry.
- We apply exterior or gutter sealant and finish it neatly.
- We check our work before we leave.
Before we arrive
- Let us know about parking restrictions
- On commercial sites, let us know about site rules
- Plan for the work area to be out of bounds to pets and children
How to get a quote
Call for a quick quote, or email us if that is easier. Describe what needs sealing and we’ll talk you through the work and give you a clear quote.
Related advice
Questions from Moor Street
Is gutter sealing in a coastal place like Moor Street any different?
Coastal homes put outside sealant through more weather than inland ones, so the choice of sealant and the preparation matter even more. It’s worth checking the walls that face the sea first.
Do you work for landlords with property near Rainham (Kent) station?
Yes, we work for landlords and agents. You can call 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before we start.
Where is Mr Mastic based?
Mr Mastic is based in Crawley. We cover Moor Street and the rest of Medway, along with the rest of our area.
Should I try DIY first?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Can you seal over the old sealant?
No. We remove every bit of old sealant first, so the new joint bonds to clean surfaces.
How long will you be here?
Typically it takes an hour or two for a few joints, longer for a full run. Larger jobs naturally take longer.
Do you do commercial work?
Yes. Hotels, offices and other businesses use us and we’re fully insured.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
What sealant work cannot fix
It helps to know what we cannot do:
- Rotten or damaged fascia boards
- Gutters that have dropped or pulled away
- Guttering that needs replacing
Not sure which it is? You can phone 0345 464 0079 or email us and we’ll tell you honestly before booking.
Joints and surfaces we work on
- Gutter joints
- uPVC fascias
- Garage door frames
- Roofline trims
- Soffit joints
- Gutter end caps
Looking after it afterwards
To keep the joints looking good and working properly:
- Watch for drips in a downpour
- Look for streaks or damp on the wall below gutters
- Look along the fascias for open joints
- Keep the gutters clear of debris
Leave the new sealant to cure as we advise and avoid disturbing it.
Once roofline sealant splits, water can get behind it. Sealing it early keeps the boards behind dry and the wall below.
DIY sealant or a professional job?
If you’ve already had a go yourself, that is fine. We cut it out and start again, so just mention it when you contact us.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
