Hampshire · England
Gutter Sealing in Micheldever Station
Problem with your gutter and fascia joints in Micheldever Station? We remove the old material, prepare the joints and seal them properly, with a 12-month guarantee.
- Failed sealant on a garage door frame
- Leaking gutter joints and stop ends
- Trim joints where the sealant has failed
Gutter sealing in Micheldever Station, done properly
For gutter sealant to hold, the joint has to be clean and dry. That’s why we take out the old sealant and dirt first, then dry the joint before sealing. Typical jobs include end caps that drip every time it rains and earlier gutter repairs that have peeled off, on soffit joints, garage door frames and gutter joints.
External sealant needs dry, clean surfaces, so work around Micheldever Station is planned for dry weather. Let us know about access to every wall, plus any garages or outbuildings.
Whatever the size of the job, you get the same 12-month guarantee.
- Location
- Micheldever Station (SO21)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Quote
- A clear price before we start
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Why it’s worth doing now in Micheldever Station
Sealing over a dirty, wet joint is a quick fix that rarely lasts, but it soon lets go. Cleaning out and drying the joint first is what makes it last. Where a wall is exposed, as many are in small places like Micheldever Station, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
What it costs depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before we start.
What you get with us
- We never seal over old sealant
- A sealant colour to suit the surroundings
- Tidy, careful work
- Full insurance on every job
Read our cost guide and what customers say.
What sealant work cannot fix
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Rotten or damaged fascia boards
- A gutter length that has split
- Water backing up from a blocked pipe
Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly before you book.
Surfaces we seal
- Garage door frames
- uPVC fascias
- Roofline trims
- Gutter joints
- Gutter end caps
- Soffit joints
What affects the cost of gutter sealing
We don’t publish a price list. The quote depends on:
- When we can work, for business premises
- How many areas need sealing
- How much old sealant there is and how hard it is to remove
- Any mould that needs treating
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. You’ll know the price before we begin.
Helping us quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Roughly how big the job is
- Where the job is, and your postcode
- If someone has resealed it before
- Any access issues, like height or stairs
There’s no standard price list, because every job is different. Instead, we give you a clear price for your job. To get started, phone 0345 464 0079 or email us.
Also near Micheldever Station
More services for Micheldever Station
Should I try it myself first?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Micheldever Station buildings and the weather
The South East is one of the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
In and around Micheldever Station, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint. For landlords with property near Overton station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.
Micheldever Station is about 8 miles north of Hyde, in Hampshire. If you need gutter sealing in Micheldever Station, it’s easy to get a quote: please call 0345 464 0079 or email us. We cover Hampshire from our Crawley base. Our area takes in 683 places across Hampshire, from the larger towns to small villages. There’s also a page for Southampton, roughly 19 miles from Micheldever Station.
Work in SO21 works the same way as everywhere else we cover. If you need gutter sealing at a property on Andover Road, Overton Road and Ellis Drive or a nearby road, our applicators can take on the job. We also cover Northbrook (2 miles south), Micheldever (2 miles south), East Stratton (3 miles south-east), Hunton (3 miles south-west) and Stoke Charity (3 miles south-west). Within a short drive, we also cover Basingstoke (9 miles north-east), Winchester (9 miles south), Eastleigh (15 miles south), Andover (10 miles west), Chandler's Ford (15 miles south) and Alton (13 miles east).
Local landmarks in Micheldever Station
Around Micheldever Station, our work takes us to homes and buildings near The Dove Inn and the streets around them. The closest station to Micheldever Station is Overton station, about 5 miles north.
Aftercare tips
After the cure time, these simple habits help:
- Look at the gutters while it’s raining
- Do not lean ladders against the gutter itself
- Look for streaks or damp on the wall below gutters
- Have sagging gutters refixed early
A sagging gutter needs its brackets checked. If it drops, the joints will open.
The sooner a gutter leak is sealed, the less water reaches the wall. We will let you know if the gutter needs more than sealant.
Work for landlords, hotels and businesses
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Common questions in Micheldever Station
Is Micheldever Station in your area for gutter sealing?
Yes. We work across London and the South East, and Micheldever Station is part of that. You can ring 0345 464 0079 or drop us an email and let us know what needs doing.
Do you cover smaller places like Micheldever Station?
Yes, Micheldever Station is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Is it possible to stop a gutter joint dripping with sealant?
Most of the time. A sagging or cracked gutter needs more than sealant and we’ll say so.
Is gutter cleaning part of the job?
The joints we seal are cleaned out and clear debris we find nearby. Cleaning the whole run is a different job.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties at once, and between tenancies is a good time for the work.
Do the sealants smell?
There can be a smell while the sealant cures, which fades as it sets. Ventilation helps.
Is it OK to seal over old sealant?
No, and we never do. It can look neat for a few weeks, but the new bead soon lifts. The old sealant has to come out completely.
How long should I leave it?
Many sealants skin over quickly but take longer to cure fully. We will tell you how long to leave the joint before we leave.
What happens on the day
We bring everything the job needs with us, so you do not need to buy or prepare anything. Once we’ve agreed what’s being done, we protect the area and start. Most jobs take a few hours, depending on the number of joints and the access. Somewhere as small as Micheldever Station, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First, we find the drip and check the gutter is not cracked or sagging.
- We clean out the joint and take out the old sealant.
- We make sure the joint is dry before sealing.
- An exterior or gutter sealant is applied to the joint.
- The run is checked and any debris near the joints is cleared.
Preparing for the visit
- Plan for the work area to be out of bounds to pets and children
- Let us know if you’ve seen damp or leaks
- For indoor joints, keep the area dry beforehand if you can
Get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work.