Hampshire · England
Gutter Sealing in Lymore
Specialist gutter sealing for Lymore: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Drips from gutter joints and end caps
- Old gutter sealant that has let go
- Dripping gutter ends
Gutter sealing in Lymore, done properly
We work across Lymore on leaking gutter joints and roofline trims. Low-level work is straightforward, and for higher work, tell us about access and we will confirm what’s needed. We work on uPVC fascias, gutter end caps and garage door frames, and people most often call us about gaps along fascia and soffit joints and dripping gutter ends.
Around Lymore, older buildings can be stone, brick or timber-framed, many with extensions added later. Where one material meets another is where water normally gets in.
Each job carries a 12-month guarantee, whatever its size.
- Place
- Lymore (SO41)
- Wider area
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- A clear price before we start
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Letting agents often deal with us directly. Tell us the address, the job and how access works and we will give you a quote.
Nearby places to Lymore
Also in Lymore
Outside joints around Lymore
Lymore is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Rented homes near Lymington Town station change hands often, and a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking. For site and facilities teams at buildings such as Milford-on-Sea Church of England Primary School, its movement joints, gutters and trims need looking after like any other building’s.
Lymore is about 2 miles south-west of Lymington, in Hampshire. From the centre of Lymore to the outskirts, we cover gutter sealing for every kind of property, from flats and houses to offices and hotels. Lymore is one of 683 places in Hampshire we cover for gutter sealing. For nearby work, see our Southampton page.
We cover every part of SO41 for gutter sealing and the streets around it. Gutter sealing is available to properties on Lymore Valley, Lymore Lane and School Lane. Close by, we work in Everton (1 mile north), Milford on Sea (1 mile south-west), Keyhaven (1 mile south-east), Lower Pennington (1 mile east) and Pennington (2 miles north-east). Further out, we also cover Totton (13 miles north), Hythe (12 miles north-east), New Milton (4 miles west), Ringwood (12 miles north-west), Warsash (15 miles north-east) and Barton on Sea (4 miles west).
Landmarks near Lymore
We work in homes and buildings around Priestlands School and The Crown Public House and the streets around them. For rail, the closest station is Lymington Town station, roughly 2.7 miles north-east of the centre. Other landmarks nearby include Lymington New Forest Hospital (2.9 miles north-east) and St Barbe Museum and Art Gallery (2.4 miles north-east). For a walk, there’s Milford on Sea LNR.
What affects the quote in Lymore
You’ll get a clear quote before we start. It’s based on:
- Any working-time requirements on site
- How much old sealant there is and how hard it is to remove
- Which sealant suits the joint
- Any mould that needs treating
Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you’re not sure whether it needs doing, call 0345 464 0079 or drop us an email for an honest opinion and a quote.
What we need to know
Photos by email are helpful but not essential. Try to tell us:
- Photos by email, if that’s easy
- Where the job is, and your postcode
- If someone has resealed it before
- Access, such as stairs, a lift or height
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. When it suits you, call 0345 464 0079 or drop us an email.
The process
Most of a good job is in the preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it generally takes anything from an hour or two to a few hours. In a small place like Lymore, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First, we find the drip and check the gutter is not cracked or sagging.
- The joint or trim is cleaned out and old sealant removed.
- The joint is dried, because sealant will not bond to a wet surface.
- An exterior or gutter sealant is applied to the joint.
- We look along the gutter and clear debris around the joints.
Before we arrive
- Let us know about stairs, lifts or work at height
- For indoor joints, keep the area dry beforehand if you can
- Clear items away from the joints we’re working on
Getting a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work before giving you a price.
Related advice
Signs you need gutter sealing in Lymore
Water spilling over a blocked gutter is often mistaken for a leak. A blocked downpipe makes water back up, which is why we look before we seal.
If you can see any of these, it’s time to have the joints looked at:
- Drips from gutter joints and end caps
- Wet patches on the wall under a gutter joint
- Garage door frames letting rain in
- Internal damp traced to a gutter joint
If you live in an older home near Church of All Saints, an extension built onto an older house moves differently, and the joint between them takes the strain.
Questions to ask before you book
- Whether VAT is included
- Whether they seal over old material or remove it
- What preparation is included
- The length of the guarantee
Looking after it afterwards
To keep the joints looking good and working properly:
- Deal with a drip before winter
- Keep ladders off the guttering
- Look at the gutters while it’s raining
- Check fascia and soffit joints for gaps
Have a look at the gutter during a downpour now and then. It’s the easiest time to see a leak.
Split sealant on fascias and trims lets water in behind. Sealing it early keeps the boards behind dry.
Different surfaces, different methods
uPVC fascias
Open fascia joints look untidy and can let water in. Sealing them closes the gap.
Soffit joints
Open soffit joints let draughts in. We close them with a suitable sealant.
Lymore: your questions answered
Will you come out to Lymore?
Yes, we do. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Is gutter sealing in a coastal place like Lymore any different?
Near the coast, wind-driven rain and, nearer the shore, salt air make outside sealant work harder. The right product, a clean joint and the right depth all help it cope.
What do you put in the joint?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we will explain our choice.
Is it worth trying it myself?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Do you take out the old sealant first?
Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Will you leave a mess?
Tidy work is part of the job. We protect what’s around the joints.
Do you clean gutters?
We clean the joints we are sealing and clear debris we find nearby. A full gutter clean is a separate service.
Why deal with it now?
Water from a leaking joint hits the same spot every time. Left, it can stain walls and lead to damp so early sealing is worthwhile. Around Lymore, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
Why choose Mr Mastic in Lymore
- Domestic, commercial and hotel work
- Colour picked to suit the job
- Quality sealants from Arbo and Everbuild
- 20+ years of sealant experience
Take a look at what affects the cost or customer reviews.