Hampshire · England
Gutter Sealing in Keyhaven
Gutter and fascia joints in Keyhaven need attention? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Old gutter sealant that has let go
- Fascia boards with gaps between them
- Dripping gutter ends
How we handle gutter sealing in Keyhaven
Gutter and fascia replacement is not our trade, and nor is roofing. What sealant does is close joints; it won’t fix a broken bracket, a cracked section or a blocked downpipe. We are often asked to deal with damp on an inside wall under a dripping gutter and rain getting in around a garage door, across uPVC fascias, gutter end caps and roofline trims.
Around Keyhaven, older buildings can be stone, brick or timber-framed, many with extensions added later. The joints where those materials meet are the weak points, and they need the right sealant at the right depth.
Your job is guaranteed for a year, as with all our work.
- Place
- Keyhaven (SO41)
- Region
- Hampshire
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
How we quote for gutter sealing
Call for a quick quote. What matters most is:
- The size of the job
- Which sealant suits the joint
- How many rooms, windows or areas are involved
- Whether the work is at height
What it costs depends on the size of the job, how hard the old material is to remove and access to the work. We give a clear quote before we start, so you know where you stand.
What to tell us for a quote
Photos by email are helpful but not essential. Try to tell us:
- Access, such as stairs, a lift or height
- Any previous sealing or DIY work
- Roughly how big the job is
- What’s wrong with the joints now
Need a quote? Please call 0345 464 0079 or drop us an email and tell us about the job. We’ll explain what we’d do and give you a clear price before any work starts.
What we cannot put right
New sealant can’t fix everything, and we will tell you before work begins. It won’t solve:
- A gutter length that has split
- Leaks from the roof rather than a joint
- Rotten or damaged fascia boards
If you are not sure, just phone 0345 464 0079 or send us an email and we will give you a straight answer.
Surfaces we seal
- Soffit joints
- Garage door frames
- Gutter joints
- uPVC fascias
- Roofline trims
- Gutter end caps
What we’re called out for in Keyhaven
Gutter joints depend on seals that wear out. Sun and cold make the gutter expand and contract, and old seals crack or slip.
These are the problems we are asked about most:
- End caps that drip every time it rains
- Trim joints where the sealant has failed
- Damp patches inside below a leaking gutter
- Gaps along fascia and soffit joints
Letting a property close to Lymington Town station? Then a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.
Comparing quotes
- Whether all the old sealant comes out first
- When the joint can take water or movement
- Who does the work, and how experienced they are
- Whether you can choose the colour
Questions from Keyhaven
Does living near the coast affect gutter sealing in Keyhaven?
Near the sea, outside joints face more wind, rain and salt than they would inland, so the choice of sealant and the preparation matter even more. Walls facing the sea are usually the first to need attention.
Can you help a landlord with a rental near Lymington Town station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just call 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll give you a clear quote.
Can a leaking gutter joint be sealed?
Most of the time. If the gutter is sagging or cracked, sealing won’t last, and we will tell you.
Will the old sealant be removed?
Yes, every time. New sealant will not bond properly to old, so any old material comes out before anything new goes in.
How long will you be here?
Typically it takes a few hours, depending on the number of joints and the access. Bigger jobs take longer, and we’ll tell you how long to expect.
Is there any odour?
That depends on the sealant. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Do you seal gaps in fascias and soffits?
Yes. Open joints along uPVC fascias and soffits can be sealed in a matching colour.
Can new sealant go over the old?
No. We remove every bit of old sealant first.
Landlord and commercial work in Keyhaven
For anyone letting property in or around Keyhaven, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and pictures by email help.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
Outside joints around Keyhaven
Keyhaven is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
If you live in an older home near Church of All Saints, old and new materials meet at the roofline and walls, which is where sealant earns its keep. For site and facilities teams at buildings such as Milford-on-Sea Church of England Primary School, larger buildings have long runs of movement joint that eventually need resealing.
Keyhaven is about 3 miles south of Lymington, in Hampshire. Wherever you are in the SO41 postcode area, we can carry out gutter sealing at your property. Keyhaven is one of 683 places in Hampshire where we work for gutter sealing. Southampton is on our list too, around 16 miles away.
Jobs for gutter sealing in SO41 works the same way as everywhere else we cover. Local streets include New Road, Keyhaven Road and Saltgrass Lane. We also cover the places around Keyhaven: Milford on Sea (1 mile west), Lymore (1 mile north-west), Lower Pennington (1 mile north-east), Everton (2 miles north-west) and Pennington (2 miles north). We also work in nearby towns such as Totton (14 miles north), Hythe (12 miles north-east), New Milton (4 miles north-west), Ringwood (13 miles north-west), Warsash (15 miles north-east) and Barton on Sea (4 miles west).
What’s near Keyhaven
Typical jobs here are in homes near The Gun Public House and Priestlands School and the streets around them. The nearest railway station is Lymington Town station, about 3 miles north-east. Nearby you will also find St Barbe Museum and Art Gallery (2.8 miles north-east) and Yarmouth Castle (3.3 miles east). The countryside around Keyhaven includes Milford on Sea LNR and Tennyson Down.
What the job involves on each surface
Soffit joints
We choose a sealant colour that suits the soffit.
Gutter joints
When a joint drips, the gutter is often still sound. Resealing is usually enough.
Why act early in Keyhaven
You do not need new fascias just because the joints have opened. A neat seal closes the gaps as long as the boards are in good condition. Where a wall is exposed, as many are in small places like Keyhaven, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Doing several joints on one visit usually makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. You’ll get one clear quote for the whole job.
Why book with us
- Trusted Arbo and Everbuild sealants
- Anti-fungal sanitary silicone in wet areas
- 20+ years of sealant experience
- We leave the area clean and tidy
See what affects the cost or our reviews.
What we do, step by step
Once we are on site, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. Most jobs then take an hour or two for a few joints, longer for a full run. Somewhere like Keyhaven needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First we trace the drip and check the gutter isn’t damaged.
- We remove the old sealant and clean the joint.
- We dry the joint so the new sealant can bond.
- A gutter sealant is applied to the joint.
- The gutter is checked and debris around the joints cleared.
How to prepare
- Mention any leaks or damp you’ve noticed
- On commercial sites, let us know about site rules
- Tell us about any previous sealing or DIY attempts
Getting a quote
To get a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. We’ll give you a clear quote before any work starts.