Aberdeenshire · Scotland
Gutter Sealing in Longside
We cover Longside for sealing leaking gutter joints, end caps, fascias, soffits and roofline trims. Old material cut out, joints cleaned and sealed neatly.
- Rain getting in around a garage door
- Trim joints where the sealant has failed
- Stop ends leaking at the end of a run
About our gutter sealing in Longside
A drip at a gutter joint is easy to ignore, but the water lands on the same spot every time it rains. Resealing it is a small job while the gutter is still sound. Typical jobs include internal damp traced to a gutter joint and end caps that drip every time it rains, on roofline trims, uPVC fascias and garage door frames.
Stone walls need a stone-friendly sealant, as acetoxy products can attack some stone. On newer homes, the movement joints and roofline trims are what need watching.
Whatever the size of the job, you get the same 12-month guarantee.
- Place
- Longside (AB42)
- Wider area
- Aberdeenshire
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
When to call us in Longside
Sagging sections pull joints apart. Sealing will not hold if the gutter keeps dropping, so the gutter needs refixing first.
Common reasons people contact us include:
- Garage door frames letting rain in
- Water dripping where gutter sections meet
- Old sealant on roofline trims that has split
- Quick sealant fixes on gutters that didn’t last
In and around Longside, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint.
Questions to ask before you book
- What insurance they hold
- Is the old sealant removed completely?
- What product goes in the joint
- Which colour the sealant will be
Common questions in Longside
Will you come out to Longside?
Yes, we do. We work across all of Scotland, and smaller places are part of that. Longer journeys are simply planned in advance.
Can you do gutter sealing in Longside?
Yes. Our work covers the whole of Scotland, and Longside is part of that. Just send an email to info@mrmastic.co.uk with a few details of the job.
Are you ARBOMaster approved?
Yes. We’re approved under the ARBOMaster scheme.
Will it make a mess?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
Will sealing fix a sagging gutter?
Not on its own. If the gutter sags, the joints keep opening, so the brackets need fixing first.
Are you insured?
Yes. We’re fully insured.
Where is Mr Mastic based?
Our base is in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Can landlords and businesses book you?
Yes, regularly. Several properties can go on one quote.
Looking after it afterwards
How long the joints last depends on use and care. We suggest:
- Check that water runs out of the downpipes
- Clean out the gutters once or twice a year
- Keep ladders off the guttering
- Watch the wall under the gutters for staining
Look at fascia and trim joints when you’re checking the gutters. Splits are easier to seal early.
Split sealant on fascias and trims lets water in behind. Sealing it early keeps the boards behind dry and the wall below.
Can I do it myself?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
How the job changes by surface
Gutter end caps
End caps take the pressure of water running along the gutter. A failed seal makes them leak.
uPVC fascias
We seal fascia joints, not replace the boards. If boards are damaged, we’ll tell you.
Towns and villages near Longside
Also in Longside
What gutter sealing looks like in Longside
Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and failed outside joints work against that. Plenty of Scottish homes have harled walls, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface.
For an older house near a landmark such as Parish Church, old and new materials meet at the roofline and walls, which is where sealant earns its keep.
Longside is about 5 miles west of Peterhead, in Aberdeenshire. Jobs in Longside get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. We cover 161 towns and villages across Aberdeenshire, large and small. Aberdeen is on our list too, about 26 miles from Longside.
We cover every part of the AB42 postcode area for gutter sealing. Whether your property is on Market Hill, Main Street and Station Road or anywhere close by, we can help. Neighbouring places we cover for gutter sealing include Mintlaw (2 miles west), Rora (3 miles north-east), Downiehills (3 miles east), Old Deer (4 miles west) and Fetterangus (4 miles north-west). Within a short drive, we also cover Peterhead (5 miles east), Fraserburgh (12 miles north), Ellon (11 miles south-west), Roanheads (6 miles east), Clerkhill (5 miles east) and Port Henry (6 miles east).
Landmarks near Longside
Nearby you’ll also find Inverugie Castle (4.2 miles east) and Carnegie Inverurie Museum (1.9 miles south-west). For a walk, there’s Hill of Aldie and Pitfour Lake.
What happens on the day
We work through the job in order: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours, depending on the number of joints and the access, and the area is left clean. Somewhere like Longside may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First we agree which joints need sealing.
- Each joint is cleaned and any old sealant removed.
- We make sure everything is dry.
- We apply exterior or gutter sealant and finish it neatly.
- The joints are checked once sealed.
Getting ready for the visit
- Move anything stored near the joints
- Mention any sign-in or site rules at work premises
- Mention any tricky access
How to get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that is easy.
Related advice
How we quote for gutter sealing
For a quick quote, just ask. The main things that affect it are:
- Mould in or behind the old joints
- How easy the joints are to reach
- Whether old sealant or filler has to be cut out
- Which sealant suits the joint
Doing several joints on one visit is normally more efficient than separate visits, so tell us about everything that needs sealing. We will give you a clear price for the lot.
Asking for a quote
To help us quote quickly, let us know:
- A few photos by email, if you can
- The rough size of the job
- The problem you’ve noticed
- Any previous sealing or DIY work
We quote each job on its own. Just send an email to info@mrmastic.co.uk with the details, and photos are welcome.
Why act early in Longside
A dripping stop end can soak the wall right through the wet months. Resealing it is a quick job before the damage spreads. In an older home around Longside, damp from a failed joint can get into timber and plaster.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we will explain what it covers.
Why us?
- Rated 4.9 stars on Google
- Sealant colour chosen to suit
- We leave the area clean and tidy
- White, clear, grey or another colour, product permitting
See our cost guide or what customers say.