Aberdeen · Scotland
Kingswells Gutter Sealing
Our applicators work in Kingswells on sealing leaking gutter joints, end caps, fascias, soffits and roofline trims. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Internal damp traced to a gutter joint
- Dripping gutter ends
- Trim joints where the sealant has failed
For landlords and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can be quoted together.
We work for landlords and letting agents as well as householders. Resealing between tenancies is a simple way to keep a property in good order before the next move-in.
Gutter sealing in Kingswells
For gutter sealant to hold, the joint has to be clean and dry. That’s why we take out the old sealant and dirt first, then dry the joint before sealing. We are often asked to deal with rain getting in around a garage door and water running down the wall below the gutter, across roofline trims, uPVC fascias and soffit joints.
Gutters and downpipes on tall city tenements are a long way up, and a slow drip can stain and soak the stone for a long time before it’s spotted. For a building in Kingswells, access is planned first, and shared parts may need the other owners to agree.
All of our work is guaranteed for twelve months, in Kingswells and everywhere else we cover.
- Where
- Kingswells (AB15)
- Wider area
- Aberdeen
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Towns and villages near Kingswells
Also in Kingswells
Looking after it afterwards
So the new joints stay in good condition:
- Keep ladders off the guttering
- Glance at the soffit joints now and then
- Watch the wall under the gutters for staining
- Sort out a dripping joint early
If a gutter starts to sag, get the brackets looked at. If it drops, the joints will open.
A leaking stop end is best sealed before the wet months. Water down the wall all winter can cause damp inside.
How the job changes by surface
Gutter joints
Joints between gutter lengths are the most common leak point. We clean, dry and reseal them.
Soffit joints
Soffit joints are sealed in a colour to suit.
Should I try it myself first?
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so just mention it when you contact us.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
When something else is needed
Before booking, it’s worth knowing the limits:
- A gutter length that has split
- Rotten or damaged fascia boards
- Water backing up from a blocked pipe
If in doubt, drop us a line at info@mrmastic.co.uk and we’ll say what we think.
What we seal
- uPVC fascias
- Gutter end caps
- Gutter joints
- Soffit joints
- Roofline trims
- Garage door frames
What gutter sealing looks like in Kingswells
Plenty of Scottish homes have harled walls, and joints where harling meets other materials need a sealant that can grip and flex. The Tenements (Scotland) Act 2004 sets out how owners share the upkeep of common parts like the roof and outside walls, and many buildings use a factor to arrange it. Your title deeds say which parts are shared.
For landlords with property near Dyce station, leaking gutter joints on a rental are best caught before they stain the walls. Managing a site like Hazlehead Academy? Then movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. In the older streets around Church Of Scotland, old and new materials meet at the roofline and walls, which is where sealant earns its keep.
Kingswells is about 4 miles west of Aberdeen, in Aberdeen. If you need gutter sealing in Kingswells, it’s easy to get a quote: please email us at info@mrmastic.co.uk. We cover Aberdeen from our Crawley base. We cover 63 towns and villages across Aberdeen.
Postcode districts we cover here for gutter sealing: AB15. You will find streets such as Midmar View, Kingswells Avenue and Midmar Crescent, all of which we cover. We also cover the places around Kingswells: Newhills (1 mile north), Countesswells (2 miles south), Westhill (3 miles west), Elrick (3 miles west) and Bieldside (3 miles south). Within a short drive, we also cover Aberdeen (4 miles east), Rosemount (4 miles east), Berryden (4 miles east), Ferryhill (5 miles east), New Aberdeen (5 miles east) and Dyce (3 miles north).
Near you in Kingswells
For rail, the closest station is Dyce station, about 3.5 miles north. Other landmarks nearby include Woodend Hospital (1.9 miles east) and Gordon Highlanders Museum (3.1 miles south-east). The countryside around Kingswells includes Rubislaw Quarry and Brimmond Hill.
FAQs for Kingswells
Can you help a landlord with a rental near Dyce station?
Yes, we work for letting agents and landlords. You can drop us a line at info@mrmastic.co.uk with the address and a few details, and we’ll give you a fixed price before any work starts.
How do repairs to the shared parts of a tenement in Kingswells get organised?
Most tenements arrange shared repairs through the owners or a property factor. The Tenements (Scotland) Act 2004 sets the rules for common parts if the deeds don’t.
Are you fully insured?
Yes, we’re fully insured for every job we do.
Is there any odour?
Some sealants have a smell while they cure, which fades as it sets. Ventilation helps.
Will you clear out my gutters?
We clean the joints we are sealing and any debris nearby is cleared. Cleaning the whole run is a different job.
Can you match the sealant colour?
Most of the time, yes. We’ll tell you which colours the right product comes in.
Do you do commercial work?
Yes. Commercial and hotel work is a large part of what we do, as well as homes. Working times can be discussed when we quote.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We will tell you what we are using and why.
What happens on the day
Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes anything from an hour or two to a few hours. Inside a flat in Kingswells, the job is planned with you; outside, shared parts may need the factor or other owners involved. It helps to know which it is when you get in touch.
- First we agree which joints need sealing.
- We clean out each joint.
- The joints are dried.
- The sealant is applied and finished.
- The joints are checked once sealed.
Preparing for the visit
- Tell us about any water getting in
- On commercial sites, let us know about site rules
- Tell us about any previous sealing or DIY attempts
Getting a quote
We don’t publish a price list, because every job is different. Instead, we send you a clear quote for your job. To get started, drop us a line at info@mrmastic.co.uk.
Read more
How we quote for gutter sealing
Call for a quick quote. What matters most is:
- The size of the job
- The product the joint needs
- How many areas need sealing
- How much old sealant there is and how hard it is to remove
What it costs depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You will have a clear quote before any work starts.
Asking for a quote
To help us quote quickly, let us know:
- The problem you’ve noticed
- The type of property
- Access, such as stairs, a lift or height
- Pictures of the joints, sent by email
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work.