Glasgow · Scotland
Gutter, fascia & soffit sealing in Kelvinside, Glasgow
Professional gutter sealing in and around Kelvinside, with every bit of old sealant taken out first and a 12-month guarantee.
- Internal damp traced to a gutter joint
- Fascia boards with gaps between them
- End caps that drip every time it rains
Gutter sealing in Kelvinside, done properly
We work across Kelvinside on leaking gutter joints and roofline trims. Single-storey and low gutters are simple to reach and if it’s higher up, let us know and we will confirm what access is needed. Typical jobs include open joints in fascias and soffits and trim joints where the sealant has failed, on soffit joints, gutter end caps and gutter joints.
Scotland’s cities also have plenty of modern blocks with rendered or clad walls and sealed movement joints. In Kelvinside, those joints dry out over time and let water in behind the render or cladding.
Every job is covered by a 12-month guarantee, wherever you are in Glasgow.
- Location
- Kelvinside (G12, G11, G20)
- Region
- Glasgow
- Guarantee
- One year on every job
- Quotes
- A clear price before we start
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Your questions about gutter sealing in Kelvinside
How is work on the outside of a tenement in Kelvinside usually arranged?
Most tenements arrange shared repairs through the owners or a property factor. The Tenements (Scotland) Act 2004 covers the common parts where the deeds do not, and we can quote for the factor or the owners directly.
Can you do gutter sealing in Kelvinside?
Yes, Kelvinside is within the area we cover. We work across all of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job, and we’ll give you a clear price.
Do you remove the old sealant?
Yes, every time. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Do you work on high-level gutters?
That depends on the building. Tell us the height and what’s around the gutter and we’ll confirm what’s needed.
Do you replace gutters or fascias?
We do not replace gutters or fascias. We’ll tell you if the gutter needs replacing so you can call the right trade.
Is there any odour?
Possibly a little. It fades as the sealant cures.
Is it possible to stop a gutter joint dripping with sealant?
Generally, if the gutter is sound. The joint is cleaned and dried first so the seal holds.
What guarantee comes with the job?
You get our 12-month guarantee to all our work.
Also near Kelvinside
What else we do in Kelvinside
Should I try it myself first?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
Walls and rooflines in Kelvinside
Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and failed outside joints work against that. Under the Tenements (Scotland) Act 2004, shared parts of a tenement, such as the roof and outside walls, are looked after by the owners together, often through a property factor. Your title deeds say which parts are shared.
Homes close to St John's Renfield Church include some older properties, and the joints between older walls, newer extensions and the roofline need a sealant that can move. Rented homes near Hyndland station change hands often, and leaking gutter joints on a rental are best caught before they stain the walls.
Kelvinside is about 2 miles north-west of Glasgow, in Glasgow. From the centre of Kelvinside to the outskirts, we cover gutter sealing for every kind of property, from flats and houses to offices and hotels. Kelvinside is one of 183 towns and villages in Glasgow where we work.
Our applicators cover all of G12, G11 and G20 for gutter sealing and the streets around it. If you need gutter sealing at a property on Kew Lane, Ford Road and Dudley Lane or anywhere close by, our applicators can take on the job. Other places close to Kelvinside include Hyndland (1 mile south-west), Dowanhill (1 mile south), Kelvindale (1 mile north-west), Partickhill (1 mile south) and Partick (1 mile south). Within a short drive, we also cover Calton (3 miles south-east), Langside (4 miles south), Yoker (3 miles west), Mount Florida (5 miles south-east), Hillpark (5 miles south) and Shawlands (4 miles south).
Near you in Kelvinside
Typical jobs here are in homes near Dawsholm Park, Church Street Primary School and Glasgow University Library and the streets around them. Also close by are The Esquire House (0.7 miles north-west) and St Peter's Boys School (0.8 miles south). There’s a railway station in Kelvinside itself: Hyndland station. Other landmarks nearby include Glasgow Museum of Transport (1.1 miles south) and Chinatown (2 miles south-east). Open spaces near Kelvinside include Castle Hill and Kilmardinny.
Aftercare tips
Joint life depends on how it’s used and looked after. We suggest:
- Do not lean ladders against the gutter itself
- Get leaks sealed before the wet months
- Keep the gutters clear of debris
- Do not leave a sagging gutter
Clear the gutters once or twice a year so water does not sit on the joints. Standing water strains every seal.
A leaking stop end is best sealed before the wet months. A winter of drips can lead to damp patches inside.
Why act early in Kelvinside
Water from a leaking joint hits the same spot every time. Over time that can stain brickwork, mark render and encourage damp, so it’s worth sealing early. For landlords in Kelvinside, damp and leaks can be a Repairing Standard issue, so it’s worth fixing failed sealant before a tenant reports it.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we will go through it with you.
Why Kelvinside customers choose us
- Homes, businesses and hotels
- Arbo and Everbuild products
- Colour picked to suit the job
- Any old sealant cut out fully, not covered over
Take a look at what affects the cost or customer reviews.
Common problems we fix in Kelvinside
Sealant laid on a wet or dirty joint fails early. Some quick repairs peel off within a season or two for this reason.
Look out for any of the following:
- Water dripping where gutter sections meet
- Streaks down the brickwork from a leaking joint
- Stop ends leaking at the end of a run
- Old gutter sealant that has let go
Schools such as Cleveden Secondary School are buildings too, and movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
Before you book anyone
- What product goes in the joint
- What happens if the job turns out different
- What the cure time is
- What guarantee comes with the work
How it works
We bring everything the job needs with us, so there’s nothing for you to buy. After a quick look at the joints together, the area is protected and the work begins. It normally takes an hour or two for a few joints, longer for a full run. Parking in city streets around Kelvinside can be tight or controlled, so it helps to know about permits or nearby bays. For flats, mention the door entry system and any shared-stair arrangements.
- First we trace the drip and check the gutter is not damaged.
- The old sealant and dirt are cleaned out of the joint.
- We dry the joint so the new sealant can bond.
- We seal the joint with a sealant made for gutters.
- We check the run and clear debris near the joints.
Getting ready for the visit
- Mention any parking rules near the property
- Mention any tricky access
- Clear items away from the joints we are working on
Ask for a quote
To get a quote, email us at info@mrmastic.co.uk with the location and a short description of the problem. You’ll have a clear quote before we start.
Advice
Landlord and commercial work in Kelvinside
Housing providers, facilities teams and property managers book us too in Kelvinside and across Glasgow. Several sites can go on one quote, and we are fully insured for the work.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
Honest limits
In fairness, some problems need a different trade:
- A gutter length that has split
- Sagging gutters or broken brackets
- Water backing up from a blocked pipe
If you are not sure, just email us at info@mrmastic.co.uk and we will give you a straight answer.
What we seal
- Soffit joints
- uPVC fascias
- Gutter joints
- Roofline trims
- Garage door frames
- Gutter end caps